Mollusk

Mollusk es un entorno ligero de pruebas para probar programas de Solana. Proporciona una interfaz simple para probar instrucciones de programas de Solana en un entorno minimizado de la Máquina Virtual de Solana (SVM). Todas las cuentas de prueba deben definirse explícitamente, asegurando pruebas deterministas y repetibles.

Instalación

Añade mollusk-svm como dependencia en Cargo.toml:

Terminal

$ cargo add mollusk-svm --dev

Cargo.toml

[dev-dependencies]
mollusk-svm = "0.7"

Para evaluar el uso de unidades de cómputo, añade mollusk-svm-bencher como dependencia en Cargo.toml:

Terminal

$ cargo add mollusk-svm-bencher --dev

Cargo.toml

[dev-dependencies]
mollusk-svm-bencher = "0.7"

Para usar el Token Program, el programa token2022 (Token Extensions), y el Associated Token Program para pruebas con Mollusk, añade mollusk-svm-programs-token como dependencia en Cargo.toml:

Terminal

$ cargo add mollusk-svm-programs-token --dev

Cargo.toml

[dev-dependencies]
mollusk-svm-programs-token = "0.7"

Mollusk SVM

El siguiente ejemplo muestra una configuración mínima para probar un programa básico de Solana usando Mollusk.

Programa Hola Mundo

Este ejemplo demuestra cómo probar un programa básico de Solana usando Mollusk. El programa simplemente imprime "Hello, world!" en los registros del programa cuando se invoca.

Ejecutar cargo build-sbf genera el programa compilado en /target/deploy/<program_name>.so.

src/lib.rs

use solana_program::{
    account_info::AccountInfo, entrypoint, entrypoint::ProgramResult, msg, pubkey::Pubkey,
};

entrypoint!(process_instruction);

pub fn process_instruction(
    _program_id: &Pubkey,
    _accounts: &[AccountInfo],
    _instruction_data: &[u8],
) -> ProgramResult {
    msg!("Hello, world!");
    Ok(())
}

#[cfg(test)]
mod tests {
    use mollusk_svm::{result::Check, Mollusk};
    use solana_sdk::{instruction::Instruction, pubkey::Pubkey};

    #[test]
    fn test_hello_world() {
        let program_id = Pubkey::new_unique();
        let mollusk = Mollusk::new(&program_id, "target/deploy/hello_world");

        let instruction = Instruction::new_with_bytes(program_id, &[], vec![]);

        mollusk.process_and_validate_instruction(&instruction, &[], &[Check::success()]);
    }
}

Para probar un programa de Solana con Mollusk:

Crear una instancia de Mollusk - Inicializar Mollusk con un ID de programa y la ruta al programa compilado (archivo .so)
Construir una instrucción - Crear una instrucción para invocar el programa
Procesar y validar - Procesar la instrucción usando Mollusk y validar el resultado

src/lib.rs

#[cfg(test)]
mod tests {
    use mollusk_svm::{result::Check, Mollusk};
    use solana_sdk::{instruction::Instruction, pubkey::Pubkey};

    #[test]
    fn test_hello_world() {
        let program_id = Pubkey::new_unique();
        let mollusk = Mollusk::new(&program_id, "target/deploy/hello_world");

        let instruction = Instruction::new_with_bytes(program_id, &[], vec![]);

        mollusk.process_and_validate_instruction(&instruction, &[], &[Check::success()]);
    }
}

Para ejecutar la prueba, ejecuta cargo test.

Cuando la prueba se ejecute correctamente, verás una salida similar a la siguiente:

Terminal

running 1 test
[2025-09-22T19:25:50.427685000Z DEBUG solana_runtime::message_processor::stable_log] Program 11157t3sqMV725NVRLrVQbAu98Jjfk1uCKehJnXXQs invoke [1]
[2025-09-22T19:25:50.429669000Z DEBUG solana_runtime::message_processor::stable_log] Program log: Hello, world!
[2025-09-22T19:25:50.429690000Z DEBUG solana_runtime::message_processor::stable_log] Program 11157t3sqMV725NVRLrVQbAu98Jjfk1uCKehJnXXQs consumed 211 of 1400000 compute units
[2025-09-22T19:25:50.429726000Z DEBUG solana_runtime::message_processor::stable_log] Program 11157t3sqMV725NVRLrVQbAu98Jjfk1uCKehJnXXQs success
test tests::test_hello_world ... ok

test result: ok. 1 passed; 0 failed; 0 ignored; 0 measured; 0 filtered out; finished in 0.02s

   Doc-tests hello_world

Programa Hola Mundo

Este ejemplo demuestra cómo probar un programa básico de Solana usando Mollusk. El programa simplemente imprime "Hello, world!" en los registros del programa cuando se invoca.

Ejecutar cargo build-sbf genera el programa compilado en /target/deploy/<program_name>.so.

Para probar un programa de Solana con Mollusk:

Crear una instancia de Mollusk - Inicializar Mollusk con un ID de programa y la ruta al programa compilado (archivo .so)
Construir una instrucción - Crear una instrucción para invocar el programa
Procesar y validar - Procesar la instrucción usando Mollusk y validar el resultado

src/lib.rs

#[cfg(test)]
mod tests {
    use mollusk_svm::{result::Check, Mollusk};
    use solana_sdk::{instruction::Instruction, pubkey::Pubkey};

    #[test]
    fn test_hello_world() {
        let program_id = Pubkey::new_unique();
        let mollusk = Mollusk::new(&program_id, "target/deploy/hello_world");

        let instruction = Instruction::new_with_bytes(program_id, &[], vec![]);

        mollusk.process_and_validate_instruction(&instruction, &[], &[Check::success()]);
    }
}

Para ejecutar la prueba, ejecuta cargo test.

Cuando la prueba se ejecute correctamente, verás una salida similar a la siguiente:

Terminal

running 1 test
[2025-09-22T19:25:50.427685000Z DEBUG solana_runtime::message_processor::stable_log] Program 11157t3sqMV725NVRLrVQbAu98Jjfk1uCKehJnXXQs invoke [1]
[2025-09-22T19:25:50.429669000Z DEBUG solana_runtime::message_processor::stable_log] Program log: Hello, world!
[2025-09-22T19:25:50.429690000Z DEBUG solana_runtime::message_processor::stable_log] Program 11157t3sqMV725NVRLrVQbAu98Jjfk1uCKehJnXXQs consumed 211 of 1400000 compute units
[2025-09-22T19:25:50.429726000Z DEBUG solana_runtime::message_processor::stable_log] Program 11157t3sqMV725NVRLrVQbAu98Jjfk1uCKehJnXXQs success
test tests::test_hello_world ... ok

test result: ok. 1 passed; 0 failed; 0 ignored; 0 measured; 0 filtered out; finished in 0.02s

   Doc-tests hello_world

lib.rs

hello_world.so

Cargo.toml

use solana_program::{
    account_info::AccountInfo, entrypoint, entrypoint::ProgramResult, msg, pubkey::Pubkey,
};

entrypoint!(process_instruction);

pub fn process_instruction(
    _program_id: &Pubkey,
    _accounts: &[AccountInfo],
    _instruction_data: &[u8],
) -> ProgramResult {
    msg!("Hello, world!");
    Ok(())
}

#[cfg(test)]
mod tests {
    use mollusk_svm::{result::Check, Mollusk};
    use solana_sdk::{instruction::Instruction, pubkey::Pubkey};

    #[test]
    fn test_hello_world() {
        let program_id = Pubkey::new_unique();
        let mollusk = Mollusk::new(&program_id, "target/deploy/hello_world");

        let instruction = Instruction::new_with_bytes(program_id, &[], vec![]);

        mollusk.process_and_validate_instruction(&instruction, &[], &[Check::success()]);
    }
}

La estructura Mollusk proporciona una interfaz simple para probar programas de Solana. Todos los campos pueden ser manipulados a través de un puñado de métodos auxiliares, pero los usuarios también pueden acceder y modificarlos directamente si desean más control.

Para inicializar Mollusk con una instancia predeterminada, utiliza el método Mollusk::default.

Example

// Default instance with no custom programs
let mollusk = Mollusk::default();

Para inicializar Mollusk con un programa específico, utiliza el método Mollusk::new.

Example

// Initialize Mollusk with a specific program from a file path
let program_id = Pubkey::new_unique();
let mollusk = Mollusk::new(&program_id, "target/deploy/my_program");

Para añadir un programa a Mollusk, utiliza el método Mollusk::add_program.

Example

let mollusk = Mollusk::default();
let program_id = Pubkey::new_unique();

// Add a program to Mollusk
mollusk.add_program(
    &program_id,
    "target/deploy/my_program",
    &bpf_loader_upgradeable::id(),
);

Al proporcionar la ruta del archivo, no incluyas la extensión .so. Por ejemplo, "path/to/my_program" es correcto, pero "path/to/my_program.so" no lo es.

Procesamiento de instrucciones

Mollusk proporciona cuatro métodos principales para procesar instrucciones:

Método	Descripción
`process_instruction`	Procesa una instrucción y devuelve el resultado.
`process_and_validate_instruction`	Procesa una instrucción y realiza una serie de comprobaciones en el resultado, entrando en pánico si alguna comprobación falla.
`process_instruction_chain`	Procesa múltiples instrucciones y devuelve el resultado.
`process_and_validate_instruction_chain`	Procesa múltiples instrucciones y realiza una serie de comprobaciones en cada resultado, entrando en pánico si alguna comprobación falla.

El InstructionResult contiene los detalles de una instrucción procesada.

Instrucción única

Utiliza el método process_instruction para procesar una sola instrucción sin comprobaciones en el resultado. Puedes validar manualmente los resultados después del procesamiento.

Method Signature

pub fn process_instruction(
    &self,
    instruction: &Instruction,
    accounts: &[(Pubkey, Account)],
) -> InstructionResult

El siguiente ejemplo procesa una instrucción de transferencia de SOL sin comprobaciones de validación.

Los ejemplos a continuación ejecutan Mollusk en la función main con fines de demostración. En la práctica, normalmente usarás Mollusk en un módulo de prueba anotado con el atributo #[test].

Single Instruction

use mollusk_svm::Mollusk;
use solana_sdk::{account::Account, pubkey::Pubkey};
use solana_system_interface::{instruction::transfer, program::ID as SYSTEM_PROGRAM_ID};

fn main() {
    // Initialize Mollusk
    let mollusk = Mollusk::default();

    // Set up accounts
    let sender = Pubkey::new_unique();
    let recipient = Pubkey::new_unique();

    let initial_lamports = 1_000_000;
    let transfer_amount = 250_000;

    // Create transfer instruction
    let instruction = transfer(&sender, &recipient, transfer_amount);

    // Define initial account states
    let accounts = vec![
        (
            sender,
            Account {
                lamports: initial_lamports,
                data: vec![],
                owner: SYSTEM_PROGRAM_ID,
                executable: false,
                rent_epoch: 0,
            },
        ),
        (
            recipient,
            Account {
                lamports: 0,
                data: vec![],
                owner: SYSTEM_PROGRAM_ID,
                executable: false,
                rent_epoch: 0,
            },
        ),
    ];

    // Process the instruction
    let result = mollusk.process_instruction(&instruction, &accounts);
    println!("{:#?}", result);

    // Check the result
    assert!(result.program_result.is_ok());
    assert_eq!(result.get_account(&sender).unwrap().lamports, 750_000);
    assert_eq!(result.get_account(&recipient).unwrap().lamports, 250_000);
}

Console

Click to execute the code.

Single Instruction

use mollusk_svm::Mollusk;
use solana_sdk::{account::Account, pubkey::Pubkey};
use solana_system_interface::{instruction::transfer, program::ID as SYSTEM_PROGRAM_ID};

fn main() {
    // Initialize Mollusk
    let mollusk = Mollusk::default();

    // Set up accounts
    let sender = Pubkey::new_unique();
    let recipient = Pubkey::new_unique();

    let initial_lamports = 1_000_000;
    let transfer_amount = 250_000;

    // Create transfer instruction
    let instruction = transfer(&sender, &recipient, transfer_amount);

    // Define initial account states
    let accounts = vec![
        (
            sender,
            Account {
                lamports: initial_lamports,
                data: vec![],
                owner: SYSTEM_PROGRAM_ID,
                executable: false,
                rent_epoch: 0,
            },
        ),
        (
            recipient,
            Account {
                lamports: 0,
                data: vec![],
                owner: SYSTEM_PROGRAM_ID,
                executable: false,
                rent_epoch: 0,
            },
        ),
    ];

    // Process the instruction
    let result = mollusk.process_instruction(&instruction, &accounts);
    println!("{:#?}", result);

    // Check the result
    assert!(result.program_result.is_ok());
    assert_eq!(result.get_account(&sender).unwrap().lamports, 750_000);
    assert_eq!(result.get_account(&recipient).unwrap().lamports, 250_000);
}

Console

Click to execute the code.

Instrucción única con verificaciones

Usa el método process_and_validate_instruction para procesar una sola instrucción con verificaciones de validación. Este método generará un error si alguna verificación falla.

Method Signature

pub fn process_and_validate_instruction(
    &self,
    instruction: &Instruction,
    accounts: &[(Pubkey, Account)],
    checks: &[Check],
) -> InstructionResult

El siguiente ejemplo procesa una instrucción de transferencia de SOL con verificaciones de validación.

With Validation

use {
    mollusk_svm::{result::Check, Mollusk},
    solana_sdk::{account::Account, pubkey::Pubkey},
    solana_system_interface::{instruction::transfer, program::ID as SYSTEM_PROGRAM_ID},
};

fn main() {
    let mollusk = Mollusk::default();

    let sender = Pubkey::new_unique();
    let recipient = Pubkey::new_unique();

    let initial_lamports = 1_000_000;
    let transfer_amount = 250_000;

    let instruction = transfer(&sender, &recipient, transfer_amount);

    let accounts = vec![
        (
            sender,
            Account {
                lamports: initial_lamports,
                data: vec![],
                owner: SYSTEM_PROGRAM_ID,
                executable: false,
                rent_epoch: 0,
            },
        ),
        (
            recipient,
            Account {
                lamports: 0,
                data: vec![],
                owner: SYSTEM_PROGRAM_ID,
                executable: false,
                rent_epoch: 0,
            },
        ),
    ];

    // Define validation checks
    let checks = vec![
        Check::success(),
        Check::account(&sender).lamports(750_000).build(),
        Check::account(&recipient).lamports(250_000).build(),
    ];

    // Process and validate (will panic if any check fails)
    let result = mollusk.process_and_validate_instruction(&instruction, &accounts, &checks);
    println!("{:#?}", result);
}

Console

Click to execute the code.

With Validation

use {
    mollusk_svm::{result::Check, Mollusk},
    solana_sdk::{account::Account, pubkey::Pubkey},
    solana_system_interface::{instruction::transfer, program::ID as SYSTEM_PROGRAM_ID},
};

fn main() {
    let mollusk = Mollusk::default();

    let sender = Pubkey::new_unique();
    let recipient = Pubkey::new_unique();

    let initial_lamports = 1_000_000;
    let transfer_amount = 250_000;

    let instruction = transfer(&sender, &recipient, transfer_amount);

    let accounts = vec![
        (
            sender,
            Account {
                lamports: initial_lamports,
                data: vec![],
                owner: SYSTEM_PROGRAM_ID,
                executable: false,
                rent_epoch: 0,
            },
        ),
        (
            recipient,
            Account {
                lamports: 0,
                data: vec![],
                owner: SYSTEM_PROGRAM_ID,
                executable: false,
                rent_epoch: 0,
            },
        ),
    ];

    // Define validation checks
    let checks = vec![
        Check::success(),
        Check::account(&sender).lamports(750_000).build(),
        Check::account(&recipient).lamports(250_000).build(),
    ];

    // Process and validate (will panic if any check fails)
    let result = mollusk.process_and_validate_instruction(&instruction, &accounts, &checks);
    println!("{:#?}", result);
}

Console

Click to execute the code.

Múltiples instrucciones

Usa el método process_instruction_chain para procesar múltiples instrucciones secuencialmente sin verificaciones de validación.

Method Signature

pub fn process_instruction_chain(
    &self,
    instructions: &[Instruction],
    accounts: &[(Pubkey, Account)],
) -> InstructionResult

El siguiente ejemplo procesa dos instrucciones de transferencia de SOL sin verificaciones de validación.

Multiple Instructions

use {
    mollusk_svm::Mollusk,
    solana_sdk::{account::Account, pubkey::Pubkey},
    solana_system_interface::{instruction::transfer, program::ID as SYSTEM_PROGRAM_ID},
};

fn main() {
    let mollusk = Mollusk::default();

    // Set up accounts
    let alice = Pubkey::new_unique();
    let bob = Pubkey::new_unique();
    let charlie = Pubkey::new_unique();

    let initial_lamports = 1_000_000;

    // Create chain of transfers
    let instructions = vec![
        transfer(&alice, &bob, 300_000),   // Alice -> Bob
        transfer(&bob, &charlie, 100_000), // Bob -> Charlie
    ];

    let accounts = vec![
        (
            alice,
            Account {
                lamports: initial_lamports,
                data: vec![],
                owner: SYSTEM_PROGRAM_ID,
                executable: false,
                rent_epoch: 0,
            },
        ),
        (
            bob,
            Account {
                lamports: 0,
                data: vec![],
                owner: SYSTEM_PROGRAM_ID,
                executable: false,
                rent_epoch: 0,
            },
        ),
        (
            charlie,
            Account {
                lamports: 0,
                data: vec![],
                owner: SYSTEM_PROGRAM_ID,
                executable: false,
                rent_epoch: 0,
            },
        ),
    ];

    // Process the instruction chain
    let result = mollusk.process_instruction_chain(&instructions, &accounts);
    println!("{:#?}", result);

    // Final balances: Alice=700K, Bob=200K, Charlie=100K
    assert_eq!(result.get_account(&alice).unwrap().lamports, 700_000);
    assert_eq!(result.get_account(&bob).unwrap().lamports, 200_000);
    assert_eq!(result.get_account(&charlie).unwrap().lamports, 100_000);
}

Console

Click to execute the code.

Multiple Instructions

use {
    mollusk_svm::Mollusk,
    solana_sdk::{account::Account, pubkey::Pubkey},
    solana_system_interface::{instruction::transfer, program::ID as SYSTEM_PROGRAM_ID},
};

fn main() {
    let mollusk = Mollusk::default();

    // Set up accounts
    let alice = Pubkey::new_unique();
    let bob = Pubkey::new_unique();
    let charlie = Pubkey::new_unique();

    let initial_lamports = 1_000_000;

    // Create chain of transfers
    let instructions = vec![
        transfer(&alice, &bob, 300_000),   // Alice -> Bob
        transfer(&bob, &charlie, 100_000), // Bob -> Charlie
    ];

    let accounts = vec![
        (
            alice,
            Account {
                lamports: initial_lamports,
                data: vec![],
                owner: SYSTEM_PROGRAM_ID,
                executable: false,
                rent_epoch: 0,
            },
        ),
        (
            bob,
            Account {
                lamports: 0,
                data: vec![],
                owner: SYSTEM_PROGRAM_ID,
                executable: false,
                rent_epoch: 0,
            },
        ),
        (
            charlie,
            Account {
                lamports: 0,
                data: vec![],
                owner: SYSTEM_PROGRAM_ID,
                executable: false,
                rent_epoch: 0,
            },
        ),
    ];

    // Process the instruction chain
    let result = mollusk.process_instruction_chain(&instructions, &accounts);
    println!("{:#?}", result);

    // Final balances: Alice=700K, Bob=200K, Charlie=100K
    assert_eq!(result.get_account(&alice).unwrap().lamports, 700_000);
    assert_eq!(result.get_account(&bob).unwrap().lamports, 200_000);
    assert_eq!(result.get_account(&charlie).unwrap().lamports, 100_000);
}

Console

Click to execute the code.

Múltiples instrucciones con verificaciones

Usa el método process_and_validate_instruction_chain para procesar múltiples instrucciones con verificaciones de validación después de cada instrucción. Cada instrucción tiene su propio conjunto de verificaciones que deben pasar.

Method Signature

pub fn process_and_validate_instruction_chain(
    &self,
    instructions: &[(&Instruction, &[Check])],
    accounts: &[(Pubkey, Account)],
) -> InstructionResult

El siguiente ejemplo procesa una cadena de dos instrucciones de transferencia de SOL con verificaciones de validación después de cada instrucción.

With Validation

use {
    mollusk_svm::{result::Check, Mollusk},
    solana_sdk::{account::Account, pubkey::Pubkey},
    solana_system_interface::{instruction::transfer, program::ID as SYSTEM_PROGRAM_ID},
};

fn main() {
    let mollusk = Mollusk::default();

    // Create accounts
    let alice = Pubkey::new_unique();
    let bob = Pubkey::new_unique();
    let charlie = Pubkey::new_unique();

    let initial_lamports = 1_000_000;

    // Create transfer instructions
    let transfer1 = transfer(&alice, &bob, 300_000);
    let transfer2 = transfer(&bob, &charlie, 100_000);

    // Initial accounts
    let accounts = vec![
        (
            alice,
            Account {
                lamports: initial_lamports,
                data: vec![],
                owner: SYSTEM_PROGRAM_ID,
                executable: false,
                rent_epoch: 0,
            },
        ),
        (
            bob,
            Account {
                lamports: 0,
                data: vec![],
                owner: SYSTEM_PROGRAM_ID,
                executable: false,
                rent_epoch: 0,
            },
        ),
        (
            charlie,
            Account {
                lamports: 0,
                data: vec![],
                owner: SYSTEM_PROGRAM_ID,
                executable: false,
                rent_epoch: 0,
            },
        ),
    ];

    // Define checks for each instruction
    let checks_after_transfer1 = vec![
        Check::success(),
        Check::account(&alice)
            .lamports(700_000) // 1M - 300K
            .build(),
        Check::account(&bob)
            .lamports(300_000) // 0 + 300K
            .build(),
        Check::account(&charlie)
            .lamports(0) // Unchanged
            .build(),
    ];

    let checks_after_transfer2 = vec![
        Check::success(),
        Check::account(&alice)
            .lamports(700_000) // Unchanged from previous
            .build(),
        Check::account(&bob)
            .lamports(200_000) // 300K - 100K
            .build(),
        Check::account(&charlie)
            .lamports(100_000) // 0 + 100K
            .build(),
    ];

    // Process with validation at each step
    let instruction_and_checks = [
        (&transfer1, checks_after_transfer1.as_slice()),
        (&transfer2, checks_after_transfer2.as_slice()),
    ];

    // Execute chain (panics if any check fails)
    let result = mollusk.process_and_validate_instruction_chain(&instruction_and_checks, &accounts);

    println!("{:#?}", result);
}

Console

Click to execute the code.

With Validation

use {
    mollusk_svm::{result::Check, Mollusk},
    solana_sdk::{account::Account, pubkey::Pubkey},
    solana_system_interface::{instruction::transfer, program::ID as SYSTEM_PROGRAM_ID},
};

fn main() {
    let mollusk = Mollusk::default();

    // Create accounts
    let alice = Pubkey::new_unique();
    let bob = Pubkey::new_unique();
    let charlie = Pubkey::new_unique();

    let initial_lamports = 1_000_000;

    // Create transfer instructions
    let transfer1 = transfer(&alice, &bob, 300_000);
    let transfer2 = transfer(&bob, &charlie, 100_000);

    // Initial accounts
    let accounts = vec![
        (
            alice,
            Account {
                lamports: initial_lamports,
                data: vec![],
                owner: SYSTEM_PROGRAM_ID,
                executable: false,
                rent_epoch: 0,
            },
        ),
        (
            bob,
            Account {
                lamports: 0,
                data: vec![],
                owner: SYSTEM_PROGRAM_ID,
                executable: false,
                rent_epoch: 0,
            },
        ),
        (
            charlie,
            Account {
                lamports: 0,
                data: vec![],
                owner: SYSTEM_PROGRAM_ID,
                executable: false,
                rent_epoch: 0,
            },
        ),
    ];

    // Define checks for each instruction
    let checks_after_transfer1 = vec![
        Check::success(),
        Check::account(&alice)
            .lamports(700_000) // 1M - 300K
            .build(),
        Check::account(&bob)
            .lamports(300_000) // 0 + 300K
            .build(),
        Check::account(&charlie)
            .lamports(0) // Unchanged
            .build(),
    ];

    let checks_after_transfer2 = vec![
        Check::success(),
        Check::account(&alice)
            .lamports(700_000) // Unchanged from previous
            .build(),
        Check::account(&bob)
            .lamports(200_000) // 300K - 100K
            .build(),
        Check::account(&charlie)
            .lamports(100_000) // 0 + 100K
            .build(),
    ];

    // Process with validation at each step
    let instruction_and_checks = [
        (&transfer1, checks_after_transfer1.as_slice()),
        (&transfer2, checks_after_transfer2.as_slice()),
    ];

    // Execute chain (panics if any check fails)
    let result = mollusk.process_and_validate_instruction_chain(&instruction_and_checks, &accounts);

    println!("{:#?}", result);
}

Console

Click to execute the code.

Comprobaciones de validación

Mollusk proporciona un conjunto de métodos auxiliares para verificar los resultados de una instrucción procesada.

Example

use mollusk_svm::result::Check;

Utiliza los siguientes métodos para validar los resultados de las instrucciones:

Example

// Program execution succeeded
Check::success()

// Program returned specific error
Check::err(ProgramError::InvalidArgument)

// Instruction level error
Check::instruction_err(InstructionError::InsufficientFunds)

// Check with specific program result
Check::program_result(ProgramResult::Success)

// Compute units consumed
Check::compute_units(1000)

// Execution time
Check::time(100)

// Return data from instruction execution
Check::return_data(&[1, 2, 3, 4])

Utiliza lo siguiente para validar los estados de las cuentas:

Example

// Single account validation
Check::account(&pubkey)
    .lamports(1_000_000)           // Exact lamports
    .owner(&program_id)            // Account owner
    .data(&expected_data)          // Exact data match
    .data_slice(8, &[1, 2, 3])     // Partial data match at offset
    .executable(false)             // Executable flag
    .space(100)                    // Account data size
    .closed()                      // Account is closed (0 lamports)
    .rent_exempt()                 // Account is rent-exempt
    .build()

// Check all accounts are rent exempt
Check::all_rent_exempt()

Estado persistente de la cuenta

El MolluskContext es un envoltorio alrededor de Mollusk que mantiene el estado de la cuenta a través de múltiples llamadas de instrucción mediante su account_store. Los métodos para procesar instrucciones son idénticos a Mollusk.

A diferencia de Mollusk, que requiere pasar accounts a cada método (por ejemplo process_instruction), MolluskContext gestiona las cuentas internamente a través de su account_store. Esto elimina la necesidad del parámetro accounts al procesar instrucciones.

Crea un account_store utilizando el método with_context:

Example

use std::collections::HashMap;
use solana_sdk::{account::Account, pubkey::Pubkey};
use solana_system_interface::program::ID as SYSTEM_PROGRAM_ID;
use mollusk_svm::Mollusk;

let mollusk = Mollusk::default();
let account_address = Pubkey::new_unique();

let mut account_store = HashMap::new();
account_store.insert(
    account_address,
    Account {
        lamports: 1_000_000,
        data: vec![],
        owner: SYSTEM_PROGRAM_ID,
        executable: false,
        rent_epoch: 0,
    },
);

let context = mollusk.with_context(account_store);

El siguiente ejemplo procesa dos instrucciones separadas de transferencia de SOL con estado de cuenta persistente entre las instrucciones a través del account_store.

Stateful Testing

use {
    mollusk_svm::Mollusk,
    solana_sdk::{account::Account, pubkey::Pubkey},
    solana_system_interface::{instruction::transfer, program::ID as SYSTEM_PROGRAM_ID},
    std::collections::HashMap,
};

fn main() {
    // Initialize Mollusk
    let mollusk = Mollusk::default();

    // Create accounts
    let sender = Pubkey::new_unique();
    let recipient = Pubkey::new_unique();

    // Create account store with initial balances
    let mut account_store = HashMap::new();
    account_store.insert(
        sender,
        Account {
            lamports: 1_000_000,
            data: vec![],
            owner: SYSTEM_PROGRAM_ID,
            executable: false,
            rent_epoch: 0,
        },
    );
    account_store.insert(
        recipient,
        Account {
            lamports: 0,
            data: vec![],
            owner: SYSTEM_PROGRAM_ID,
            executable: false,
            rent_epoch: 0,
        },
    );

    // Create a stateful context
    let context = mollusk.with_context(account_store);

    // First transfer: 200,000 lamports
    let instruction1 = transfer(&sender, &recipient, 200_000);
    context.process_instruction(&instruction1);

    // Second transfer: 100,000 lamports (state persists from first transfer)
    let instruction2 = transfer(&sender, &recipient, 100_000);
    context.process_instruction(&instruction2);

    // Check final balances
    let store = context.account_store.borrow();
    let sender_account = store.get(&sender).unwrap();
    let recipient_account = store.get(&recipient).unwrap();
    println!("Sender: {:#?}", sender_account);
    println!("Recipient: {:#?}", recipient_account);
}

Console

Click to execute the code.

Stateful Testing

use {
    mollusk_svm::Mollusk,
    solana_sdk::{account::Account, pubkey::Pubkey},
    solana_system_interface::{instruction::transfer, program::ID as SYSTEM_PROGRAM_ID},
    std::collections::HashMap,
};

fn main() {
    // Initialize Mollusk
    let mollusk = Mollusk::default();

    // Create accounts
    let sender = Pubkey::new_unique();
    let recipient = Pubkey::new_unique();

    // Create account store with initial balances
    let mut account_store = HashMap::new();
    account_store.insert(
        sender,
        Account {
            lamports: 1_000_000,
            data: vec![],
            owner: SYSTEM_PROGRAM_ID,
            executable: false,
            rent_epoch: 0,
        },
    );
    account_store.insert(
        recipient,
        Account {
            lamports: 0,
            data: vec![],
            owner: SYSTEM_PROGRAM_ID,
            executable: false,
            rent_epoch: 0,
        },
    );

    // Create a stateful context
    let context = mollusk.with_context(account_store);

    // First transfer: 200,000 lamports
    let instruction1 = transfer(&sender, &recipient, 200_000);
    context.process_instruction(&instruction1);

    // Second transfer: 100,000 lamports (state persists from first transfer)
    let instruction2 = transfer(&sender, &recipient, 100_000);
    context.process_instruction(&instruction2);

    // Check final balances
    let store = context.account_store.borrow();
    let sender_account = store.get(&sender).unwrap();
    let recipient_account = store.get(&recipient).unwrap();
    println!("Sender: {:#?}", sender_account);
    println!("Recipient: {:#?}", recipient_account);
}

Console

Click to execute the code.

Sysvars de Mollusk

Mollusk proporciona una estructura personalizada Sysvars para modificar sus valores para pruebas.

Utiliza el método warp_to_slot para actualizar el reloj sysvar y simular el avance o retroceso en el tiempo a un slot específico.

Warp to Slot

use mollusk_svm::Mollusk;

fn main() {
    // Initialize Mollusk
    let mut mollusk = Mollusk::default();

    // Show initial slot
    println!("Initial slot: {}", mollusk.sysvars.clock.slot);

    // Warp to slot 1000
    mollusk.warp_to_slot(100);
    println!("After warp: {}", mollusk.sysvars.clock.slot);

    // Warp to slot 10
    mollusk.warp_to_slot(10);
    println!("After second warp: {}", mollusk.sysvars.clock.slot);
}

Console

Click to execute the code.

Warp to Slot

use mollusk_svm::Mollusk;

fn main() {
    // Initialize Mollusk
    let mut mollusk = Mollusk::default();

    // Show initial slot
    println!("Initial slot: {}", mollusk.sysvars.clock.slot);

    // Warp to slot 1000
    mollusk.warp_to_slot(100);
    println!("After warp: {}", mollusk.sysvars.clock.slot);

    // Warp to slot 10
    mollusk.warp_to_slot(10);
    println!("After second warp: {}", mollusk.sysvars.clock.slot);
}

Console

Click to execute the code.

El siguiente ejemplo muestra cómo modificar el sysvar de Mollusk directamente accediendo al campo sysvars para cambiar los parámetros de rent. Puedes modificar otros valores de sysvar de la misma manera.

Modify Sysvars

use {mollusk_svm::Mollusk, solana_sdk::rent::Rent};

fn main() {
    let mut mollusk = Mollusk::default();

    // Show default rent
    println!(
        "Default rent exemption for 1000 bytes: {} lamports",
        mollusk.sysvars.rent.minimum_balance(1000)
    );

    // Customize rent parameters
    mollusk.sysvars.rent = Rent {
        lamports_per_byte_year: 1,
        exemption_threshold: 1.0,
        burn_percent: 0,
    };

    // Show custom rent
    println!(
        "Custom rent exemption for 1000 bytes: {} lamports",
        mollusk.sysvars.rent.minimum_balance(1000)
    );
}

Console

Click to execute the code.

Modify Sysvars

use {mollusk_svm::Mollusk, solana_sdk::rent::Rent};

fn main() {
    let mut mollusk = Mollusk::default();

    // Show default rent
    println!(
        "Default rent exemption for 1000 bytes: {} lamports",
        mollusk.sysvars.rent.minimum_balance(1000)
    );

    // Customize rent parameters
    mollusk.sysvars.rent = Rent {
        lamports_per_byte_year: 1,
        exemption_threshold: 1.0,
        burn_percent: 0,
    };

    // Show custom rent
    println!(
        "Custom rent exemption for 1000 bytes: {} lamports",
        mollusk.sysvars.rent.minimum_balance(1000)
    );
}

Console

Click to execute the code.

Evaluación comparativa de unidades de cómputo

MolluskComputeUnitBencher realiza un seguimiento del uso de unidades de cómputo de las instrucciones de un programa. Los resultados se escriben en un archivo markdown.

Requiere mollusk-svm-bencher como dependencia.

El siguiente ejemplo evalúa el uso de unidades de cómputo de una instrucción de transferencia de SOL.

Benchmark Compute Units

use {
    mollusk_svm::Mollusk,
    mollusk_svm_bencher::MolluskComputeUnitBencher,
    solana_sdk::{account::Account, pubkey::Pubkey},
    solana_system_interface::{instruction::transfer, program::ID as SYSTEM_PROGRAM_ID},
};

fn main() {
    // Initialize Mollusk
    let mollusk = Mollusk::default();

    // Create test accounts
    let sender = Pubkey::new_unique();
    let receiver = Pubkey::new_unique();

    // Transfer instruction
    let transfer = transfer(&sender, &receiver, 100_000);
    let accounts = vec![
        (
            sender,
            Account {
                lamports: 1_000_000,
                data: vec![],
                owner: SYSTEM_PROGRAM_ID,
                executable: false,
                rent_epoch: 0,
            },
        ),
        (
            receiver,
            Account {
                lamports: 0,
                data: vec![],
                owner: SYSTEM_PROGRAM_ID,
                executable: false,
                rent_epoch: 0,
            },
        ),
    ];

    // Run benchmark
    MolluskComputeUnitBencher::new(mollusk)
        .bench(("transfer", &transfer, &accounts))
        .must_pass(true)
        .out_dir("./target/benches")
        .execute();
}

Los resultados de la evaluación comparativa se escriben en el out_dir especificado como un archivo markdown llamado compute_units.md.

comput_units.md

#### 2025-09-19 22:28:53.691839 UTC

Solana CLI Version: solana-cli 2.2.20 (src:dabc99a5; feat:3073396398,
client:Agave)

| Name     | CUs | Delta   |
| -------- | --- | ------- |
| transfer | 150 | - new - |

Pruebas del Token Program

Utiliza el paquete mollusk-svm-programs-token para añadir el Token Program, el programa token2022 (Token Extensions) y el Associated Token Program a Mollusk para realizar pruebas.

Example

use {
    mollusk_svm::Mollusk,
    mollusk_svm_programs_token::{associated_token, token, token2022},
};

let mut mollusk = Mollusk::default();

// Add SPL Token Program
token::add_program(&mut mollusk);
// Add SPL Token-2022 Program
token2022::add_program(&mut mollusk);
// Add Associated Token Account Program
associated_token::add_program(&mut mollusk);

El siguiente ejemplo demuestra cómo probar una transferencia de token usando Mollusk.

El ejemplo a continuación define manualmente las cuentas de prueba con fines de demostración. El paquete mollusk-svm-programs-token también incluye funciones auxiliares para crear las cuentas de mint y token.

Token Transfer Example

use {
    mollusk_svm::{result::Check, Mollusk},
    mollusk_svm_programs_token::token,
    solana_sdk::{account::Account, program_pack::Pack, pubkey::Pubkey},
    spl_token_interface::{
        instruction::transfer_checked,
        state::{Account as TokenAccount, AccountState, Mint},
    },
};

fn main() {
    // Initialize Mollusk with Token program
    let mut mollusk = Mollusk::default();
    token::add_program(&mut mollusk);

    // Create account keys
    let mint = Pubkey::new_unique();
    let source = Pubkey::new_unique();
    let destination = Pubkey::new_unique();
    let authority = Pubkey::new_unique();

    // Token configuration
    let decimals = 6;
    let transfer_amount = 1_000_000; // 1 token with 6 decimals
    let initial_balance = 10_000_000; // 10 tokens

    // Calculate rent-exempt minimums
    let mint_rent = mollusk.sysvars.rent.minimum_balance(Mint::LEN);
    let account_rent = mollusk.sysvars.rent.minimum_balance(TokenAccount::LEN);

    // Create mint account
    let mut mint_data = vec![0u8; Mint::LEN];
    Mint::pack(
        Mint {
            mint_authority: Some(authority).into(),
            supply: initial_balance,
            decimals,
            is_initialized: true,
            freeze_authority: None.into(),
        },
        &mut mint_data,
    )
    .unwrap();

    // Create source token account
    let mut source_data = vec![0u8; TokenAccount::LEN];
    TokenAccount::pack(
        TokenAccount {
            mint,
            owner: authority,
            amount: initial_balance,
            delegate: None.into(),
            state: AccountState::Initialized,
            is_native: None.into(),
            delegated_amount: 0,
            close_authority: None.into(),
        },
        &mut source_data,
    )
    .unwrap();

    // Create destination token account
    let mut destination_data = vec![0u8; TokenAccount::LEN];
    TokenAccount::pack(
        TokenAccount {
            mint,
            owner: Pubkey::new_unique(),
            amount: 0,
            delegate: None.into(),
            state: AccountState::Initialized,
            is_native: None.into(),
            delegated_amount: 0,
            close_authority: None.into(),
        },
        &mut destination_data,
    )
    .unwrap();

    // Setup accounts for transfer_checked
    let accounts = vec![
        (
            source,
            Account {
                lamports: account_rent,
                data: source_data,
                owner: token::ID,
                executable: false,
                rent_epoch: 0,
            },
        ),
        (
            mint,
            Account {
                lamports: mint_rent,
                data: mint_data,
                owner: token::ID,
                executable: false,
                rent_epoch: 0,
            },
        ),
        (
            destination,
            Account {
                lamports: account_rent,
                data: destination_data,
                owner: token::ID,
                executable: false,
                rent_epoch: 0,
            },
        ),
        (
            authority,
            Account {
                lamports: 1_000_000,
                data: vec![],
                owner: Pubkey::default(),
                executable: false,
                rent_epoch: 0,
            },
        ),
    ];

    // Create transfer_checked instruction
    let instruction = transfer_checked(
        &token::ID,
        &source,
        &mint,
        &destination,
        &authority,
        &[],
        transfer_amount,
        decimals,
    )
    .unwrap();

    // Expected balances after transfer
    let expected_source_balance = (initial_balance - transfer_amount).to_le_bytes();
    let expected_dest_balance = transfer_amount.to_le_bytes();

    // Define validation checks
    let checks = vec![
        Check::success(),
        Check::account(&source)
            .data_slice(64, &expected_source_balance) // Token amount is at offset 64
            .build(),
        Check::account(&destination)
            .data_slice(64, &expected_dest_balance)
            .build(),
    ];

    // Process and validate the instruction
    let result = mollusk.process_and_validate_instruction(&instruction, &accounts, &checks);
    println!("{:#?}", result);

    // Deserialize token account data
    let source_account = result.get_account(&source).unwrap();
    let source_token = TokenAccount::unpack(&source_account.data).unwrap();
    println!("Source Token Account: {:#?}", source_token);

    let destination_account = result.get_account(&destination).unwrap();
    let dest_token = TokenAccount::unpack(&destination_account.data).unwrap();
    println!("Destination Token Account: {:#?}", dest_token);
}

Console

Click to execute the code.

Token Transfer Example

use {
    mollusk_svm::{result::Check, Mollusk},
    mollusk_svm_programs_token::token,
    solana_sdk::{account::Account, program_pack::Pack, pubkey::Pubkey},
    spl_token_interface::{
        instruction::transfer_checked,
        state::{Account as TokenAccount, AccountState, Mint},
    },
};

fn main() {
    // Initialize Mollusk with Token program
    let mut mollusk = Mollusk::default();
    token::add_program(&mut mollusk);

    // Create account keys
    let mint = Pubkey::new_unique();
    let source = Pubkey::new_unique();
    let destination = Pubkey::new_unique();
    let authority = Pubkey::new_unique();

    // Token configuration
    let decimals = 6;
    let transfer_amount = 1_000_000; // 1 token with 6 decimals
    let initial_balance = 10_000_000; // 10 tokens

    // Calculate rent-exempt minimums
    let mint_rent = mollusk.sysvars.rent.minimum_balance(Mint::LEN);
    let account_rent = mollusk.sysvars.rent.minimum_balance(TokenAccount::LEN);

    // Create mint account
    let mut mint_data = vec![0u8; Mint::LEN];
    Mint::pack(
        Mint {
            mint_authority: Some(authority).into(),
            supply: initial_balance,
            decimals,
            is_initialized: true,
            freeze_authority: None.into(),
        },
        &mut mint_data,
    )
    .unwrap();

    // Create source token account
    let mut source_data = vec![0u8; TokenAccount::LEN];
    TokenAccount::pack(
        TokenAccount {
            mint,
            owner: authority,
            amount: initial_balance,
            delegate: None.into(),
            state: AccountState::Initialized,
            is_native: None.into(),
            delegated_amount: 0,
            close_authority: None.into(),
        },
        &mut source_data,
    )
    .unwrap();

    // Create destination token account
    let mut destination_data = vec![0u8; TokenAccount::LEN];
    TokenAccount::pack(
        TokenAccount {
            mint,
            owner: Pubkey::new_unique(),
            amount: 0,
            delegate: None.into(),
            state: AccountState::Initialized,
            is_native: None.into(),
            delegated_amount: 0,
            close_authority: None.into(),
        },
        &mut destination_data,
    )
    .unwrap();

    // Setup accounts for transfer_checked
    let accounts = vec![
        (
            source,
            Account {
                lamports: account_rent,
                data: source_data,
                owner: token::ID,
                executable: false,
                rent_epoch: 0,
            },
        ),
        (
            mint,
            Account {
                lamports: mint_rent,
                data: mint_data,
                owner: token::ID,
                executable: false,
                rent_epoch: 0,
            },
        ),
        (
            destination,
            Account {
                lamports: account_rent,
                data: destination_data,
                owner: token::ID,
                executable: false,
                rent_epoch: 0,
            },
        ),
        (
            authority,
            Account {
                lamports: 1_000_000,
                data: vec![],
                owner: Pubkey::default(),
                executable: false,
                rent_epoch: 0,
            },
        ),
    ];

    // Create transfer_checked instruction
    let instruction = transfer_checked(
        &token::ID,
        &source,
        &mint,
        &destination,
        &authority,
        &[],
        transfer_amount,
        decimals,
    )
    .unwrap();

    // Expected balances after transfer
    let expected_source_balance = (initial_balance - transfer_amount).to_le_bytes();
    let expected_dest_balance = transfer_amount.to_le_bytes();

    // Define validation checks
    let checks = vec![
        Check::success(),
        Check::account(&source)
            .data_slice(64, &expected_source_balance) // Token amount is at offset 64
            .build(),
        Check::account(&destination)
            .data_slice(64, &expected_dest_balance)
            .build(),
    ];

    // Process and validate the instruction
    let result = mollusk.process_and_validate_instruction(&instruction, &accounts, &checks);
    println!("{:#?}", result);

    // Deserialize token account data
    let source_account = result.get_account(&source).unwrap();
    let source_token = TokenAccount::unpack(&source_account.data).unwrap();
    println!("Source Token Account: {:#?}", source_token);

    let destination_account = result.get_account(&destination).unwrap();
    let dest_token = TokenAccount::unpack(&destination_account.data).unwrap();
    println!("Destination Token Account: {:#?}", dest_token);
}

Console

Click to execute the code.

Programa Hola Mundo

Programa Hola Mundo

Tabla de Contenidos