NAV-koersen voor geldmarktfondsen op Solana

NAV (Net Asset Value) koersen zijn vaste tijdstippen tijdens de handelsdag waarop fondsaandelen worden geprijsd en orders worden uitgevoerd. Traditionele fondsen hebben doorgaans één dagelijkse koers bij marktsluit, maar Solana's snelheid en lage kosten maken meerdere intraday-koersen mogelijk, wat beleggers meer flexibiliteit biedt.

Wat is NAV?

Een fonds is een pool van activa die veel beleggers gezamenlijk bezitten. NAV (Net Asset Value) is simpelweg de prijs van één aandeel in een fonds. Zie het zo:

NAV = (Total Value of Everything in the Fund - liabilities) ÷ Number of Shares

Als een fonds bijvoorbeeld $10 miljoen aan activa aanhoudt en 10 miljoen aandelen uitstaan, is elk aandeel $1,00 waard.

Waarom is NAV belangrijk?

  • Aandelen kopen (inschrijving): U betaalt de huidige NAV. Als de NAV $1,02 is en u belegt $102, ontvangt u 100 aandelen.
  • Aandelen verkopen (terugkoop): U ontvangt de huidige NAV. Als u 100 aandelen terugkoopt tegen NAV $1,02, ontvangt u $102.

Geldmarktfondsen handhaven doorgaans een stabiele NAV rond $1,00, met kleine schommelingen op basis van verdiende rente.

Het Probleem

Wanneer u belegt in een geldmarktfonds, gebeuren er traditioneel twee dingen op verschillende momenten:

  1. U dient een order in → Wacht op marktsluit
  2. NAV berekend → Aandelen uitgegeven/teruggekocht op T+1 of T+2

Dit leidt tot verschillende problemen:

  • Vertraagde uitvoering: Orders ingediend in de ochtend wachten tot 16:00 uur
  • Afwikkelingsvertraging: Uw geld staat 1-2 dagen in de wacht
  • Beperkte flexibiliteit: Slechts één kans per dag om te transacteren
  • Verouderde prijsstelling: NAV kan verouderd zijn tussen order en uitvoering

De Oplossing

NAV-koersen op Solana maken meerdere dagelijkse afwikkelingsvensters mogelijk met atomaire uitvoering. Orders worden in de wachtrij gezet en worden direct uitgevoerd op elk koerstijdstip tegen de huidige NAV.

┌─────────────────────────────────────────────────────────────┐
│ MULTIPLE DAILY NAV STRIKES │
├─────────────────────────────────────────────────────────────┤
│ │
│ 9:30 AM 12:00 PM 2:30 PM 4:00 PM │
│ │ │ │ │ │
│ ▼ ▼ ▼ ▼ │
│ ┌─────┐ ┌─────┐ ┌─────┐ ┌─────┐ │
│ │STRIKE│ │STRIKE│ │STRIKE│ │STRIKE│ │
│ │NAV=$1│ │NAV=$1│ │NAV=$1│ │NAV=$1│ │
│ │.0012 │ │.0015 │ │.0018 │ │.0020 │ │
│ └─────┘ └─────┘ └─────┘ └─────┘ │
│ │ │ │ │ │
│ ▼ ▼ ▼ ▼ │
│ Process Process Process Process │
│ Orders Orders Orders Orders │
│ │
│ ✅ Atomic settlement at each strike │
│ ✅ NAV stored onchain in token metadata │
│ ✅ Less stale prices │
│ │
└─────────────────────────────────────────────────────────────┘

Deze handleiding demonstreert hoe NAV-koersen op Solana te implementeren met SPL Token 2022-extensies voor conforme uitgifte van fondsaandelen en standaard USDC voor afwikkeling, zonder aangepaste Rust-programma's te schrijven.

Educatieve Referentie-implementatie

U kunt de broncode van deze implementatie gebruiken om NAV-koersen lokaal uit te proberen.

Deze handleiding biedt een referentie-implementatie uitsluitend voor verkenning en educatieve doeleinden. Gebruik deze code NIET rechtstreeks in productie zonder:

  • Uitgebreide beveiligingsaudits
  • Adequate sleutelbeheer systemen
  • Beoordeling van wettelijke naleving
  • Juridisch advies
  • Uitgebreid testen en aanpassingen

Architectuuroverzicht

Het NAV-koerssysteem bestaat uit de volgende kerncomponenten:

  1. Token voor fondsaandelen: SPL Token 2022 met metadata die NAV onchain opslaat
  2. Afwikkelingsvaluta: Standaard USDC (bestaand SPL-token)
  3. Fondsbeheerder: Orkestreert koersen via gedelegeerde bevoegdheid
  4. Whitelist-systeem: Bepaalt welke adressen fondsaandelen kunnen aanhouden

Belangrijkste Ontwerpprincipes

  • Geen Aangepaste Programma's: Gebruikt alleen Token Extensions Program en standaard USDC
  • Atomaire Afwikkeling: Enkele transactie zorgt ervoor dat inschrijving/terugkoop samen slaagt of mislukt
  • Standaard Bevroren Status: Aandelen vereisen expliciete whitelisting voor naleving van regelgeving
  • Gedelegeerde Bevoegdheid: Fondsbeheerder opereert zonder bewaring te nemen
  • On-Chain NAV: Huidige prijs opgeslagen in token-metadata, publiek verifieerbaar

Fase 1: Fondsopzet

  1. Maak Token Extensions token voor fondsaandelen aan met metadata-extensies
  2. Initialiseer NAV op $1,00
  3. Stel dagelijks koersschema in
  4. Voeg institutionele beleggers toe aan whitelist

Fase 2: Pre-koersperiode

  1. Beleggers dienen inschrijvings-/terugkoopverzoeken in
  2. Orders worden in de wachtrij gezet voor het volgende koerstijdstip
  3. Fonds berekent voorlopige NAV
  4. Risicocontroles uitgevoerd

Fase 3: NAV-koersuitvoering

At Strike Time (e.g., 14:30):
├── Calculate final NAV from underlying assets
├── Update onchain NAV in metadata
├── Process all pending subscriptions atomically
│ └── USDC → Fund Shares at exact NAV
├── Process all pending redemptions atomically
│ └── Fund Shares → USDC at exact NAV
└── Emit strike completion event
✅ STRIKE COMPLETE (all trades at same NAV)

Fase 4: Post-koers

  1. Handelsbevestigingen genereren
  2. Fondssamenstelling bijwerken
  3. Voorbereiden voor volgende koers
  4. Afstemmen met bewaarder

Patroon voor Gedelegeerde Bevoegdheid

Beleggers machtigen de fondsbeheerder vooraf om hun tokens te verplaatsen, waarna de beheerder op het koerstijdstip uitvoert zonder handtekeningen van beleggers nodig te hebben:

┌──────────┐ delegates ┌────────────────────┐ delegates ┌──────────┐
│ Investor │ ───────────────→ │ Fund Administrator │ ←────────────── │ Investor │
│ A │ (USDC) │ (trusted) │ (shares) │ B │
└──────────┘ │ │ └──────────┘
│ executes strike │
│ (atomic txns) │
└────────────────────┘

Inschrijvingsstroom (USDC → Fondsaandelen)

Investor wants to invest $100,000 USDC
Current NAV = $1.000234 per share
────────────────────────────────────
1. Investor approves $100,000 USDC delegation
2. At strike time, atomic transaction:
├── Transfer $100,000 USDC from investor
├── Calculate shares: 100,000 / 1.000234 = 99,976.61
└── Mint 99,976.61 fund shares to investor
3. Settlement complete in <1 second

Terugkoopstroom (Fondsaandelen → USDC)

Investor wants to redeem 50,000 shares
Current NAV = $1.000234 per share
────────────────────────────────────
1. Investor approves 50,000 shares delegation
2. At strike time, atomic transaction:
├── Burn 50,000 fund shares from investor
├── Calculate USDC: 50,000 × 1.000234 = $50,011.70
└── Transfer $50,011.70 USDC to investor
3. Settlement complete in <1 second

Waarom Solana voor NAV-koersen?

Solana's architectuur biedt aanzienlijke voordelen ten opzichte van traditionele fondsafwikkeling:

AspectTraditioneel (T+1)Solana NAV-koersen
AfwikkelingslogicaTransferagentenAtomaire transactiebundeling
Afwikkelingstijd1-2 dagen<1 seconde
Transactiekosten$50-200<$0,01
Koersen per dag14+ (configureerbaar)
Risico op verouderde prijzenHoogLager
NAV-transparantieRapport einde van de dagOnchain, real-time

Solana's atomaire transacties elimineren tussenpersonen en bieden directe, goedkope en veilige afwikkelingen met onchain NAV-transparantie.

Fondstoken met Token Extensions

SPL Token 2022 biedt krachtige extensies die conforme uitgifte van fondsaandelen mogelijk maken zonder aangepaste programma's:

Essentiële Extensies voor Fondsaandelen

  1. Standaard account-statusextensie: Stelt alle nieuwe token accounts standaard in op bevroren, waarvoor expliciete whitelisting (KYC/AML-naleving) vereist is
  2. Metadata-extensie: Slaat NAV, koersschema en AUM onchain op voor transparantie

Autoriteitsconfiguratie

  • Mint-autoriteit: Fondsbeheerder (beheert aandelenuitgifte)
  • Bevriezingsautoriteit: Fondsbeheerder (beheert whitelist)
  • Updateautoriteit: Fondsbeheerder (werkt NAV-metadata bij)

De standaard bevroren status is essentieel voor naleving van regelgeving. Het zorgt ervoor dat alleen expliciet op de whitelist geplaatste (KYC-geverifieerde) adressen fondsaandelen kunnen ontvangen en aanhouden.

On-Chain Metadatavelden

{
"name": "Example Money Market Fund",
"symbol": "EX-MMF",
"currentNAV": "1.000234",
"lastStrikeTime": "2024-01-15T14:30:00Z",
"strikeSchedule": "[\"09:30\", \"12:00\", \"14:30\", \"16:00\"]",
"totalAUM": "50000000.00",
"fundType": "Money Market Fund"
}

Volledige NAV-koersen Implementatie

De NAV-koersengine Instellen

Merk op dat we in deze handleiding de @solana/kit-bibliotheek gebruiken om de NAV-koersengine te maken. U kunt ook een web3.js-implementatie vinden in de broncode. Maak eerst de kernengine-klasse aan die alle fondsbewerkingen afhandelt:

/**
* NAV Strikes Engine - Solana Kit Reference Implementation
*
* This implementation demonstrates NAV strikes for money market funds on Solana using:
* - SPL Token 2022 with Default Account State extension for fund shares
* - Standard USDC for settlement
* - Atomic transactions for subscription/redemption
* - Delegated authority pattern for fund administrator
*
* Built with @solana/kit (web3.js 2.0)
*
* ⚠️ IMPORTANT: This is a reference implementation for educational purposes.
* Do NOT use in production without proper audits and security reviews.
*/
import {
Address,
airdropFactory,
appendTransactionMessageInstructions,
createSolanaRpc,
createSolanaRpcSubscriptions,
createTransactionMessage,
generateKeyPairSigner,
getSignatureFromTransaction,
KeyPairSigner,
lamports,
pipe,
sendAndConfirmTransactionFactory,
setTransactionMessageFeePayerSigner,
setTransactionMessageLifetimeUsingBlockhash,
signTransactionMessageWithSigners,
Rpc,
RpcSubscriptions,
SolanaRpcApi,
SolanaRpcSubscriptionsApi
} from "@solana/kit";
import { getCreateAccountInstruction } from "@solana-program/system";
import {
TOKEN_PROGRAM_ADDRESS,
getApproveInstruction,
getTransferCheckedInstruction,
getMintToInstruction,
getBurnInstruction,
findAssociatedTokenPda,
getCreateAssociatedTokenInstruction
} from "@solana-program/token";
import {
TOKEN_2022_PROGRAM_ADDRESS,
getInitializeMintInstruction,
getInitializeTokenMetadataInstruction,
getUpdateTokenMetadataFieldInstruction,
tokenMetadataField,
getThawAccountInstruction,
getFreezeAccountInstruction,
AccountState,
getMintSize,
extension,
getPreInitializeInstructionsForMintExtensions,
fetchMaybeToken
} from "@solana-program/token-2022";
import { pack } from "@solana/spl-token-metadata";
import { PublicKey } from "@solana/web3.js";
// TLV (Type-Length-Value) sizes for Token-2022 extensions
const TYPE_SIZE = 2;
const LENGTH_SIZE = 2;
import type {
FundTokenConfig,
FundState,
SubscriptionParams,
RedemptionParams,
SubscriptionResult,
RedemptionResult,
StrikeResult,
StrikeOrder,
SolanaClient
} from "./types";
/**
* Cluster type for explorer links
*/
export type ClusterType = "mainnet-beta" | "devnet" | "testnet" | "localnet";
/**
* Generate Solana Explorer link for a transaction
*/
export function getExplorerLink(
signature: string,
cluster: ClusterType = "localnet"
): string {
const baseUrl = "https://explorer.solana.com/tx";
if (cluster === "localnet") {
return `${baseUrl}/${signature}?cluster=custom&customUrl=http%3A%2F%2Flocalhost%3A8899`;
}
return `${baseUrl}/${signature}?cluster=${cluster}`;
}
/**
* Generate Solana Explorer link for an account/address
*/
export function getAddressExplorerLink(
addr: string,
cluster: ClusterType = "localnet"
): string {
const baseUrl = "https://explorer.solana.com/address";
if (cluster === "localnet") {
return `${baseUrl}/${addr}?cluster=custom&customUrl=http%3A%2F%2Flocalhost%3A8899`;
}
return `${baseUrl}/${addr}?cluster=${cluster}`;
}
/**
* Create a Solana client for Kit
*/
export async function createSolanaClient(
rpcUrl: string = "http://127.0.0.1:8899",
wsUrl: string = "ws://127.0.0.1:8900"
): Promise<SolanaClient> {
const rpc = createSolanaRpc(rpcUrl);
const rpcSubscriptions = createSolanaRpcSubscriptions(wsUrl);
const sendAndConfirmTransaction = sendAndConfirmTransactionFactory({
rpc,
rpcSubscriptions
});
return {
rpc,
rpcSubscriptions,
sendAndConfirmTransaction
};
}
/**
* NAV Strike Engine - Solana Kit Version
*
* Manages the lifecycle of a money market fund on Solana:
* - Creates fund tokens with Token 2022 extensions
* - Updates NAV at scheduled strike times
* - Processes subscription and redemption orders atomically
*/
export class NAVStrikeEngine {
private client: SolanaClient;
private fundAdministrator: KeyPairSigner;
private cluster: ClusterType;
// Fund state
private currentNAV: number = 1.0;
private totalAUM: number = 0;
private totalSharesOutstanding: number = 0;
private strikeSchedule: string[] = [];
private lastStrikeTime: Date = new Date();
// Order queue
private pendingOrders: StrikeOrder[] = [];
private orderCounter: number = 0;
constructor(
client: SolanaClient,
fundAdministrator: KeyPairSigner,
cluster: ClusterType = "localnet"
) {
this.client = client;
this.fundAdministrator = fundAdministrator;
this.cluster = cluster;
}
/**
* Helper to send and confirm transactions with correct typing
* Works around stricter types in @solana/kit v5+
*/
// eslint-disable-next-line @typescript-eslint/no-explicit-any
private async sendTransaction(
signedTx: any,
commitment: "confirmed" | "finalized" = "confirmed"
): Promise<void> {
await this.client.sendAndConfirmTransaction(signedTx, { commitment });
}
/**
* Get explorer link for a transaction signature
*/
getTxExplorerLink(signature: string): string {
return getExplorerLink(signature, this.cluster);
}
/**
* Get explorer link for an address
*/
getAddressLink(addr: string): string {
return getAddressExplorerLink(addr, this.cluster);
}
/**
* Creates a fund share token using Token-2022 with Default Account State and Metadata extensions
* Fund shares are frozen by default and require whitelisting
* Metadata stores NAV and fund information onchain
*/
async createFundToken(
issuer: KeyPairSigner,
config: FundTokenConfig
): Promise<Address> {
console.log(
"\n╔══════════════════════════════════════════════════════════════╗"
);
console.log(
"║ NAV STRIKE - FUND CREATION (Kit) ║"
);
console.log(
"╚══════════════════════════════════════════════════════════════╝"
);
console.log(`\n🏗️ Creating fund token with Token-2022 + Metadata...`);
console.log(` Name: ${config.name}`);
console.log(` Symbol: ${config.symbol}`);
console.log(` Initial NAV: $${config.initialNAV.toFixed(6)}`);
console.log(` Strike Schedule: ${config.strikeSchedule.join(", ")}`);
// Generate new keypair for the mint
const mint = await generateKeyPairSigner();
const decimals = config.decimals ?? 6;
// Define extensions
const defaultAccountStateExtension = extension("DefaultAccountState", {
state: AccountState.Frozen
});
const metadataPointerExtension = extension("MetadataPointer", {
authority: this.fundAdministrator.address,
metadataAddress: mint.address
});
const extensions = [defaultAccountStateExtension, metadataPointerExtension];
// Calculate mint size without metadata
const baseMintSize = getMintSize(extensions);
// Create metadata object to calculate EXACT size using pack()
// Note: PublicKey is only used here for size calculation, not for transaction building
const metadataForSizing = {
mint: new PublicKey(mint.address),
name: config.name,
symbol: config.symbol,
uri: config.uri || "",
additionalMetadata: [
["icon-uri", "link to icon"], // Max NAV format
["currentNAV", "999999.999999"], // Max NAV format
["lastStrikeTime", "2099-12-31T23:59:59.999Z"], // Max ISO timestamp
["strikeSchedule", JSON.stringify(config.strikeSchedule)],
["totalAUM", "999999999999999.99"], // Max AUM (quadrillions)
["fundType", "Money Market Fund"]
] as [string, string][]
};
// Calculate exact metadata size using pack()
const metadataLen = pack(metadataForSizing).length;
// MetadataExtension TLV overhead: 2 bytes for type, 2 bytes for length
const metadataExtensionOverhead = TYPE_SIZE + LENGTH_SIZE;
// Add safety buffer for any encoding overhead
const totalSpace =
baseMintSize + metadataLen + metadataExtensionOverhead + 100;
// Get rent for total space
const mintRent = await this.client.rpc
.getMinimumBalanceForRentExemption(BigInt(totalSpace))
.send();
// Build create account instruction (with base size, but extra rent for metadata)
const createAccountIx = getCreateAccountInstruction({
payer: issuer,
newAccount: mint,
lamports: lamports(mintRent),
space: baseMintSize,
programAddress: TOKEN_2022_PROGRAM_ADDRESS
});
// Get extension initialization instructions
const preInitIxs = getPreInitializeInstructionsForMintExtensions(
mint.address,
extensions
);
// Initialize mint instruction (Token 2022)
const initMintIx = getInitializeMintInstruction({
mint: mint.address,
decimals,
mintAuthority: this.fundAdministrator.address,
freezeAuthority: this.fundAdministrator.address
});
// Initialize metadata instruction
const initMetadataIx = getInitializeTokenMetadataInstruction({
metadata: mint.address,
updateAuthority: this.fundAdministrator.address,
mint: mint.address,
mintAuthority: this.fundAdministrator,
name: config.name,
symbol: config.symbol,
uri: ""
});
// Build custom metadata field update instructions
const initialMetadata: [string, string][] = [
["currentNAV", config.initialNAV.toFixed(6)],
["lastStrikeTime", new Date().toISOString()],
["strikeSchedule", JSON.stringify(config.strikeSchedule)],
["totalAUM", "0.00"],
["fundType", "Money Market Fund"]
];
const updateFieldIxs = initialMetadata.map(([key, value]) =>
getUpdateTokenMetadataFieldInstruction({
metadata: mint.address,
updateAuthority: this.fundAdministrator,
field: tokenMetadataField("Key", [key]),
value
})
);
// Get latest blockhash
const { value: latestBlockhash } = await this.client.rpc
.getLatestBlockhash()
.send();
// Build transaction message
const transactionMessage = pipe(
createTransactionMessage({ version: 0 }),
(tx) => setTransactionMessageFeePayerSigner(issuer, tx),
(tx) => setTransactionMessageLifetimeUsingBlockhash(latestBlockhash, tx),
(tx) =>
appendTransactionMessageInstructions(
[
createAccountIx,
...preInitIxs,
initMintIx,
initMetadataIx,
...updateFieldIxs
],
tx
)
);
// Sign and send
const signedTransaction =
await signTransactionMessageWithSigners(transactionMessage);
const signature = getSignatureFromTransaction(signedTransaction);
await this.sendTransaction(signedTransaction);
// Update internal state
this.currentNAV = config.initialNAV;
this.strikeSchedule = config.strikeSchedule;
this.lastStrikeTime = new Date();
console.log(`\n✅ Fund token created: ${mint.address}`);
console.log(` Mint Authority: ${this.fundAdministrator.address}`);
console.log(` Freeze Authority: ${this.fundAdministrator.address}`);
console.log(` Default State: FROZEN (requires whitelisting)`);
console.log(` ✨ Metadata: ON-CHAIN`);
console.log(` - NAV: $${config.initialNAV.toFixed(6)}`);
console.log(` - Schedule: ${config.strikeSchedule.join(", ")}`);
console.log(` 🔗 Token: ${this.getAddressLink(mint.address)}`);
console.log(` 🔗 Tx: ${this.getTxExplorerLink(signature)}`);
return mint.address;
}

Dynamische Metadata-updates

Voor fondsaandelen worden de velden currentNAV, lastStrikeTime en totalAUM bij elke NAV-koers onchain bijgewerkt met behulp van getUpdateTokenMetadataFieldInstruction. Dit biedt:

  • Real-time NAV-zichtbaarheid voor alle deelnemers
  • Auditspoor van alle NAV-updates onchain
  • Integratie met DeFi-protocollen die onchain metadata kunnen lezen
/**
* Updates NAV onchain in token metadata
*/
async updateNAV(fundMint: Address, newNAV: number): Promise<string> {
const previousNAV = this.currentNAV;
this.currentNAV = newNAV;
this.lastStrikeTime = new Date();
// Build update field instructions
const updateNavIx = getUpdateTokenMetadataFieldInstruction({
metadata: fundMint,
updateAuthority: this.fundAdministrator,
field: tokenMetadataField("Key", ["currentNAV"]),
value: newNAV.toFixed(6)
});
const updateTimeIx = getUpdateTokenMetadataFieldInstruction({
metadata: fundMint,
updateAuthority: this.fundAdministrator,
field: tokenMetadataField("Key", ["lastStrikeTime"]),
value: this.lastStrikeTime.toISOString()
});
const updateAumIx = getUpdateTokenMetadataFieldInstruction({
metadata: fundMint,
updateAuthority: this.fundAdministrator,
field: tokenMetadataField("Key", ["totalAUM"]),
value: this.totalAUM.toFixed(2)
});
const { value: latestBlockhash } = await this.client.rpc
.getLatestBlockhash()
.send();
const transactionMessage = pipe(
createTransactionMessage({ version: 0 }),
(tx) => setTransactionMessageFeePayerSigner(this.fundAdministrator, tx),
(tx) => setTransactionMessageLifetimeUsingBlockhash(latestBlockhash, tx),
(tx) =>
appendTransactionMessageInstructions(
[updateNavIx, updateTimeIx, updateAumIx],
tx
)
);
const signedTransaction =
await signTransactionMessageWithSigners(transactionMessage);
const signature = getSignatureFromTransaction(signedTransaction);
await this.sendTransaction(signedTransaction);
const navChange = ((newNAV - previousNAV) / previousNAV) * 100;
const changeSymbol = navChange >= 0 ? "▲" : "▼";
console.log(
` NAV Updated: $${previousNAV.toFixed(6)} → $${newNAV.toFixed(
6
)} (${changeSymbol}${Math.abs(navChange).toFixed(4)}%)`
);
console.log(` 🔗 Explorer: ${this.getTxExplorerLink(signature)}`);
return signature;
}
/**
* Whitelists an investor by creating their fund account and thawing it
*/
async whitelistInvestor(
fundMint: Address,
investor: Address,
payer: KeyPairSigner
): Promise<Address> {
console.log(`\n🔓 Whitelisting investor: ${investor.slice(0, 20)}...`);
// Find the ATA
const [ata] = await findAssociatedTokenPda({
mint: fundMint,
owner: investor,
tokenProgram: TOKEN_2022_PROGRAM_ADDRESS
});
const maybeToken = await fetchMaybeToken(this.client.rpc, ata, {
commitment: "confirmed"
});
const { value: latestBlockhash } = await this.client.rpc
.getLatestBlockhash()
.send();
if (!maybeToken.exists) {
// Create ATA
const createAtaIx = getCreateAssociatedTokenInstruction({
payer,
owner: investor,
mint: fundMint,
ata,
tokenProgram: TOKEN_2022_PROGRAM_ADDRESS
});
const createAtaMsg = pipe(
createTransactionMessage({ version: 0 }),
(tx) => setTransactionMessageFeePayerSigner(payer, tx),
(tx) =>
setTransactionMessageLifetimeUsingBlockhash(latestBlockhash, tx),
(tx) => appendTransactionMessageInstructions([createAtaIx], tx)
);
const signedCreateAta =
await signTransactionMessageWithSigners(createAtaMsg);
await this.sendTransaction(signedCreateAta);
}
// Thaw the account
const thawIx = getThawAccountInstruction({
account: ata,
mint: fundMint,
owner: this.fundAdministrator
});
const thawMsg = pipe(
createTransactionMessage({ version: 0 }),
(tx) => setTransactionMessageFeePayerSigner(payer, tx),
(tx) => setTransactionMessageLifetimeUsingBlockhash(latestBlockhash, tx),
(tx) => appendTransactionMessageInstructions([thawIx], tx)
);
const signedThaw = await signTransactionMessageWithSigners(thawMsg);
await this.sendTransaction(signedThaw);
console.log(` Account: ${ata}`);
console.log(`✅ Investor whitelisted and account thawed`);
return ata;
}
/**
* Removes an investor from whitelist by freezing their account
*/
async removeFromWhitelist(
fundMint: Address,
investorFundAccount: Address,
payer: KeyPairSigner
): Promise<void> {
console.log(`\n🔒 Removing from whitelist: ${investorFundAccount}`);
const { value: latestBlockhash } = await this.client.rpc
.getLatestBlockhash()
.send();
const freezeIx = getFreezeAccountInstruction({
account: investorFundAccount,
mint: fundMint,
owner: this.fundAdministrator
});
const freezeMsg = pipe(
createTransactionMessage({ version: 0 }),
(tx) => setTransactionMessageFeePayerSigner(payer, tx),
(tx) => setTransactionMessageLifetimeUsingBlockhash(latestBlockhash, tx),
(tx) => appendTransactionMessageInstructions([freezeIx], tx)
);
const signedFreeze = await signTransactionMessageWithSigners(freezeMsg);
await this.sendTransaction(signedFreeze);
console.log(`✅ Account frozen and removed from whitelist`);
}
/**
* Delegates USDC authority to fund administrator for subscription
*/
async delegateUSDCForSubscription(
investor: KeyPairSigner,
usdcMint: Address,
amount: number
): Promise<void> {
const [investorUSDC] = await findAssociatedTokenPda({
mint: usdcMint,
owner: investor.address,
tokenProgram: TOKEN_PROGRAM_ADDRESS
});
console.log(`\n🤝 Delegating USDC for subscription...`);
console.log(` Amount: $${amount.toLocaleString()}`);
const { value: latestBlockhash } = await this.client.rpc
.getLatestBlockhash()
.send();
const approveIx = getApproveInstruction({
source: investorUSDC,
delegate: this.fundAdministrator.address,
owner: investor,
amount: BigInt(amount * 1e6)
});
const approveMsg = pipe(
createTransactionMessage({ version: 0 }),
(tx) => setTransactionMessageFeePayerSigner(investor, tx),
(tx) => setTransactionMessageLifetimeUsingBlockhash(latestBlockhash, tx),
(tx) => appendTransactionMessageInstructions([approveIx], tx)
);
const signedApprove = await signTransactionMessageWithSigners(approveMsg);
await this.sendTransaction(signedApprove);
console.log(`✅ USDC delegation approved`);
}
/**
* Delegates fund shares authority to administrator for redemption
*/
async delegateSharesForRedemption(
investor: KeyPairSigner,
fundMint: Address,
shareAmount: number
): Promise<void> {
const [investorShares] = await findAssociatedTokenPda({
mint: fundMint,
owner: investor.address,
tokenProgram: TOKEN_2022_PROGRAM_ADDRESS
});
console.log(`\n🤝 Delegating shares for redemption...`);
console.log(` Shares: ${shareAmount.toLocaleString()}`);
const { value: latestBlockhash } = await this.client.rpc
.getLatestBlockhash()
.send();
const approveIx = getApproveInstruction(
{
source: investorShares,
delegate: this.fundAdministrator.address,
owner: investor,
amount: BigInt(Math.floor(shareAmount * 1e6))
},
{ programAddress: TOKEN_2022_PROGRAM_ADDRESS }
);
const approveMsg = pipe(
createTransactionMessage({ version: 0 }),
(tx) => setTransactionMessageFeePayerSigner(investor, tx),
(tx) => setTransactionMessageLifetimeUsingBlockhash(latestBlockhash, tx),
(tx) => appendTransactionMessageInstructions([approveIx], tx)
);
const signedApprove = await signTransactionMessageWithSigners(approveMsg);
await this.sendTransaction(signedApprove);
console.log(`✅ Share delegation approved`);
}
/**
* Executes atomic subscription: USDC → Fund Shares at current NAV
*/
async processSubscription(
params: SubscriptionParams
): Promise<SubscriptionResult> {
const { fundMint, usdcMint, investor, usdcAmount } = params;
// Calculate shares at current NAV
const sharesToMint = usdcAmount / this.currentNAV;
const shortAddr = `${investor.slice(0, 4)}...${investor.slice(-4)}`;
console.log(`\n⚡ Processing subscription...`);
console.log(` Investor: ${shortAddr}`);
console.log(` USDC Amount: $${usdcAmount.toLocaleString()}`);
console.log(` NAV: $${this.currentNAV.toFixed(6)}`);
console.log(` Shares to mint: ${sharesToMint.toFixed(6)}`);
// Get token accounts
const [investorUSDC] = await findAssociatedTokenPda({
mint: usdcMint,
owner: investor,
tokenProgram: TOKEN_PROGRAM_ADDRESS
});
const [fundUSDC] = await findAssociatedTokenPda({
mint: usdcMint,
owner: this.fundAdministrator.address,
tokenProgram: TOKEN_PROGRAM_ADDRESS
});
const [investorShares] = await findAssociatedTokenPda({
mint: fundMint,
owner: investor,
tokenProgram: TOKEN_2022_PROGRAM_ADDRESS
});
const { value: latestBlockhash } = await this.client.rpc
.getLatestBlockhash()
.send();
// Build atomic transaction with both instructions
// 1. Transfer USDC from investor to fund (using delegated authority)
const transferUSDCIx = getTransferCheckedInstruction({
source: investorUSDC,
mint: usdcMint,
destination: fundUSDC,
authority: this.fundAdministrator,
amount: BigInt(Math.floor(usdcAmount * 1e6)),
decimals: 6
});
// 2. Mint fund shares to investor
const mintSharesIx = getMintToInstruction(
{
mint: fundMint,
token: investorShares,
mintAuthority: this.fundAdministrator,
amount: BigInt(Math.floor(sharesToMint * 1e6))
},
{ programAddress: TOKEN_2022_PROGRAM_ADDRESS }
);
const txMessage = pipe(
createTransactionMessage({ version: 0 }),
(tx) => setTransactionMessageFeePayerSigner(this.fundAdministrator, tx),
(tx) => setTransactionMessageLifetimeUsingBlockhash(latestBlockhash, tx),
(tx) =>
appendTransactionMessageInstructions([transferUSDCIx, mintSharesIx], tx) // <- Both happen at the same time
);
const signedTx = await signTransactionMessageWithSigners(txMessage);
const signature = getSignatureFromTransaction(signedTx);
await this.sendTransaction(signedTx);
// Update fund state
this.totalAUM += usdcAmount;
this.totalSharesOutstanding += sharesToMint;
console.log(`✅ SUBSCRIPTION SETTLED ATOMICALLY`);
console.log(` Shares issued: ${sharesToMint.toFixed(6)}`);
console.log(` New AUM: $${this.totalAUM.toLocaleString()}`);
console.log(` 🔗 Explorer: ${this.getTxExplorerLink(signature)}`);
return {
signature,
usdcAmount,
sharesIssued: sharesToMint,
executionNAV: this.currentNAV,
timestamp: new Date()
};
}
/**
* Executes atomic redemption: Fund Shares → USDC at current NAV
*/
async processRedemption(params: RedemptionParams): Promise<RedemptionResult> {
const { fundMint, usdcMint, investor, shareAmount } = params;
// Calculate USDC at current NAV
const usdcToPay = shareAmount * this.currentNAV;
const shortAddr = `${investor.slice(0, 4)}...${investor.slice(-4)}`;
console.log(`\n⚡ Processing redemption...`);
console.log(` Investor: ${shortAddr}`);
console.log(` Shares to redeem: ${shareAmount.toLocaleString()}`);
console.log(` NAV: $${this.currentNAV.toFixed(6)}`);
console.log(` USDC to pay: $${usdcToPay.toFixed(2)}`);
// Get token accounts
const [investorShares] = await findAssociatedTokenPda({
mint: fundMint,
owner: investor,
tokenProgram: TOKEN_2022_PROGRAM_ADDRESS
});
const [investorUSDC] = await findAssociatedTokenPda({
mint: usdcMint,
owner: investor,
tokenProgram: TOKEN_PROGRAM_ADDRESS
});
const [fundUSDC] = await findAssociatedTokenPda({
mint: usdcMint,
owner: this.fundAdministrator.address,
tokenProgram: TOKEN_PROGRAM_ADDRESS
});
const { value: latestBlockhash } = await this.client.rpc
.getLatestBlockhash()
.send();
// Build atomic transaction with both instructions
// 1. Burn fund shares from investor (using delegated authority)
const burnSharesIx = getBurnInstruction(
{
account: investorShares,
mint: fundMint,
authority: this.fundAdministrator,
amount: BigInt(Math.floor(shareAmount * 1e6))
},
{ programAddress: TOKEN_2022_PROGRAM_ADDRESS }
);
// 2. Transfer USDC from fund to investor
const transferUSDCIx = getTransferCheckedInstruction({
source: fundUSDC,
mint: usdcMint,
destination: investorUSDC,
authority: this.fundAdministrator,
amount: BigInt(Math.floor(usdcToPay * 1e6)),
decimals: 6
});
const txMessage = pipe(
createTransactionMessage({ version: 0 }),
(tx) => setTransactionMessageFeePayerSigner(this.fundAdministrator, tx),
(tx) => setTransactionMessageLifetimeUsingBlockhash(latestBlockhash, tx),
(tx) =>
appendTransactionMessageInstructions([burnSharesIx, transferUSDCIx], tx)
);
const signedTx = await signTransactionMessageWithSigners(txMessage);
const signature = getSignatureFromTransaction(signedTx);
await this.sendTransaction(signedTx);
// Update fund state
this.totalAUM -= usdcToPay;
this.totalSharesOutstanding -= shareAmount;
console.log(`✅ REDEMPTION SETTLED ATOMICALLY`);
console.log(` USDC paid: $${usdcToPay.toFixed(2)}`);
console.log(` New AUM: $${this.totalAUM.toLocaleString()}`);
console.log(` 🔗 Explorer: ${this.getTxExplorerLink(signature)}`);
return {
signature,
sharesRedeemed: shareAmount,
usdcPaid: usdcToPay,
executionNAV: this.currentNAV,
timestamp: new Date()
};
}
/**
* Queue an order for the next NAV strike
*/
queueOrder(
investor: Address,
orderType: "subscribe" | "redeem",
amount: number
): StrikeOrder {
const order: StrikeOrder = {
orderId: `ORD-${++this.orderCounter}`,
investor,
orderType,
amount,
strikeTime: this.getNextStrikeTime(),
status: "pending"
};
this.pendingOrders.push(order);
const shortAddr = `${investor.slice(0, 4)}...${investor.slice(-4)}`;
console.log(`\n📝 Order queued: ${order.orderId}`);
console.log(` Investor: ${shortAddr}`);
console.log(` Type: ${orderType}`);
console.log(
` Amount: ${
orderType === "subscribe"
? `$${amount.toLocaleString()} USDC`
: `${amount.toLocaleString()} shares`
}`
);
return order;
}
/**
* Execute NAV strike - update NAV and process all pending orders
*/
async executeStrike(
fundMint: Address,
usdcMint: Address,
newNAV: number
): Promise<StrikeResult> {
const strikeId = `STRIKE-${Date.now()}`;
const strikeTime = new Date();
console.log(
"\n╔══════════════════════════════════════════════════════════════╗"
);
console.log(
"║ NAV STRIKE EXECUTION ║"
);
console.log(
"╚══════════════════════════════════════════════════════════════╝"
);
console.log(` Strike ID: ${strikeId}`);
console.log(` Strike Time: ${strikeTime.toISOString()}`);
console.log(` New NAV: $${newNAV.toFixed(6)}`);
console.log(` Pending Orders: ${this.pendingOrders.length}`);
console.log(
"────────────────────────────────────────────────────────────────"
);
// 1. Update NAV
await this.updateNAV(fundMint, newNAV);
// 2. Process pending orders
const signatures: string[] = [];
let totalUSDCSubscribed = 0;
let totalSharesMinted = 0;
let totalSharesRedeemed = 0;
let totalUSDCPaid = 0;
let subscriptionsProcessed = 0;
let redemptionsProcessed = 0;
const subscriptions = this.pendingOrders.filter(
(o) => o.orderType === "subscribe" && o.status === "pending"
);
const redemptions = this.pendingOrders.filter(
(o) => o.orderType === "redeem" && o.status === "pending"
);
// Process subscriptions
console.log(`\n📥 Processing ${subscriptions.length} subscriptions...`);
for (const order of subscriptions) {
try {
const result = await this.processSubscription({
fundMint,
usdcMint,
investor: order.investor,
usdcAmount: order.amount
});
order.status = "executed";
signatures.push(result.signature);
totalUSDCSubscribed += result.usdcAmount;
totalSharesMinted += result.sharesIssued;
subscriptionsProcessed++;
} catch (error) {
console.error(` ❌ Order ${order.orderId} failed:`, error);
order.status = "failed";
}
}
// Process redemptions
console.log(`\n📤 Processing ${redemptions.length} redemptions...`);
for (const order of redemptions) {
try {
const result = await this.processRedemption({
fundMint,
usdcMint,
investor: order.investor,
shareAmount: order.amount
});
order.status = "executed";
signatures.push(result.signature);
totalSharesRedeemed += result.sharesRedeemed;
totalUSDCPaid += result.usdcPaid;
redemptionsProcessed++;
} catch (error) {
console.error(` ❌ Order ${order.orderId} failed:`, error);
order.status = "failed";
}
}
// Clear executed orders
this.pendingOrders = this.pendingOrders.filter(
(o) => o.status === "pending"
);
// Print summary
console.log(
"\n════════════════════════════════════════════════════════════════"
);
console.log(
" STRIKE SUMMARY "
);
console.log(
"════════════════════════════════════════════════════════════════"
);
console.log(` Subscriptions: ${subscriptionsProcessed} processed`);
console.log(` Total USDC In: $${totalUSDCSubscribed.toLocaleString()}`);
console.log(` Shares Minted: ${totalSharesMinted.toFixed(2)}`);
console.log(` Redemptions: ${redemptionsProcessed} processed`);
console.log(` Shares Burned: ${totalSharesRedeemed.toFixed(2)}`);
console.log(` Total USDC Out: $${totalUSDCPaid.toLocaleString()}`);
console.log(` New AUM: $${this.totalAUM.toLocaleString()}`);
console.log(
` Shares Outstanding: ${this.totalSharesOutstanding.toFixed(2)}`
);
console.log(
"════════════════════════════════════════════════════════════════\n"
);
return {
strikeId,
strikeTime,
nav: this.currentNAV,
subscriptionsProcessed,
totalUSDCSubscribed,
totalSharesMinted,
redemptionsProcessed,
totalSharesRedeemed,
totalUSDCPaid,
signatures
};
}
/**
* Get current fund state
*/
getFundState(fundMint: Address): FundState {
return {
fundMint,
currentNAV: this.currentNAV,
lastStrikeTime: this.lastStrikeTime,
totalAUM: this.totalAUM,
totalSharesOutstanding: this.totalSharesOutstanding
};
}
/**
* Get current NAV
*/
getCurrentNAV(): number {
return this.currentNAV;
}
/**
* Get pending orders
*/
getPendingOrders(): StrikeOrder[] {
return [...this.pendingOrders];
}
/**
* Calculate next strike time based on schedule
*/
getNextStrikeTime(): Date {
const now = new Date();
const currentTime = `${now.getHours().toString().padStart(2, "0")}:${now
.getMinutes()
.toString()
.padStart(2, "0")}`;
for (const strikeTime of this.strikeSchedule) {
if (strikeTime > currentTime) {
const [hours, minutes] = strikeTime.split(":");
const strikeDate = new Date(now);
strikeDate.setHours(parseInt(hours), parseInt(minutes), 0, 0);
return strikeDate;
}
}
// Next strike is tomorrow's first strike
const tomorrow = new Date(now);
tomorrow.setDate(tomorrow.getDate() + 1);
const [hours, minutes] = this.strikeSchedule[0].split(":");
tomorrow.setHours(parseInt(hours), parseInt(minutes), 0, 0);
return tomorrow;
}
/**
* Airdrops SOL for testing
*/
async airdropSol(publicKey: Address, amount: number): Promise<void> {
console.log(
`\n💰 Airdropping ${amount} SOL to ${publicKey.slice(0, 20)}...`
);
const airdrop = airdropFactory({
rpc: this.client.rpc,
rpcSubscriptions: this.client.rpcSubscriptions
});
await airdrop({
recipientAddress: publicKey,
lamports: lamports(BigInt(amount * 1_000_000_000)),
commitment: "confirmed"
});
console.log(`✅ Airdrop complete`);
}
}

Volledig Gebruiksvoorbeeld

Hier is een volledig voorbeeld dat een volledige dag aan NAV-koersbewerkingen demonstreert:

/**
* NAV Strikes Demo - Solana Kit Version
*
* Demonstrates multiple daily NAV strikes for a money market fund on Solana.
* Built with @solana/kit (web3.js 2.0)
*
* Run with: npm run demo:kit
* Requires: solana-test-validator running locally
*
* ⚠️ EDUCATIONAL REFERENCE ONLY - NOT FOR PRODUCTION USE
*/
import {
airdropFactory,
generateKeyPairSigner,
lamports,
KeyPairSigner,
Address
} from "@solana/kit";
import {
NAVStrikeEngine,
createSolanaClient,
getExplorerLink
} from "../nav-strike-engine";
import {
createTestUSDC,
mintTestUSDC,
getUSDCBalance,
getFundShareBalance
} from "../test-usdc";
import type { SolanaClient } from "../types";
/**
* Helper to print section headers
*/
function printHeader(title: string): void {
console.log("\n");
console.log(
"╔══════════════════════════════════════════════════════════════╗"
);
console.log(`║ ${title.padEnd(60)}║`);
console.log(
"╚══════════════════════════════════════════════════════════════╝"
);
}
/**
* Print final balances for all participants
*/
async function printBalances(
client: SolanaClient,
fundMint: Address,
usdcMint: Address,
participants: { name: string; address: Address }[]
): Promise<void> {
console.log(
"\n┌─────────────────────────────────────────────────────────────────┐"
);
console.log(
"│ FINAL BALANCES │"
);
console.log(
"├─────────────────────────────────────────────────────────────────┤"
);
for (const { name, address } of participants) {
const usdcBalance = await getUSDCBalance(client, usdcMint, address);
const shareBalance = await getFundShareBalance(client, fundMint, address);
console.log(
`│ ${name.padEnd(15)} USDC: $${usdcBalance
.toFixed(2)
.padStart(10)} │ Shares: ${shareBalance.toFixed(2).padStart(10)} │`
);
}
console.log(
"└─────────────────────────────────────────────────────────────────┘"
);
// Cost comparison
console.log(
"\n┌─────────────────────────────────────────────────────────────────┐"
);
console.log(
"│ COST COMPARISON │"
);
console.log(
"├─────────────────────────────────────────────────────────────────┤"
);
console.log(
"│ Traditional Solana NAV Strikes │"
);
console.log(
"│ ───────────────────────────────────────────────────────────── │"
);
console.log(
"│ Strikes/Day: 1 (4PM) 4+ (configurable)│"
);
console.log(
"│ Settlement: T+1/T+2 Instant │"
);
console.log(
"│ Pricing: Unknown til 4PM Exact NAV at strike │"
);
console.log(
"│ Compliance: Manual KYC/AML Onchain whitelist │"
);
console.log(
"│ Settlement Risk: High None │"
);
console.log(
"│ Audit Trail: Manual Blockchain │"
);
console.log(
"└─────────────────────────────────────────────────────────────────┘"
);
}
/**
* Main demo function
*/
async function main(): Promise<void> {
console.log(`
╔══════════════════════════════════════════════════════════════════╗
║ ║
║ ███╗ ██╗ █████╗ ██╗ ██╗ ███████╗████████╗██████╗ ║
║ ████╗ ██║██╔══██╗██║ ██║ ██╔════╝╚══██╔══╝██╔══██╗ ║
║ ██╔██╗ ██║███████║██║ ██║ ███████╗ ██║ ██████╔╝ ║
║ ██║╚██╗██║██╔══██║╚██╗ ██╔╝ ╚════██║ ██║ ██╔══██╗ ║
║ ██║ ╚████║██║ ██║ ╚████╔╝ ███████║ ██║ ██║ ██║ ║
║ ╚═╝ ╚═══╝╚═╝ ╚═╝ ╚═══╝ ╚══════╝ ╚═╝ ╚═╝ ╚═╝ ║
║ ║
║ NAV STRIKES - Solana Kit Reference Implementation ║
║ Built with @solana/kit (web3.js 2.0) ║
║ ║
╚══════════════════════════════════════════════════════════════════╝
`);
// ─────────────────────────────────────────────────────────────────
// SETUP: Connect to local validator
// ─────────────────────────────────────────────────────────────────
printHeader("SETUP: Connecting to Local Validator");
const client = await createSolanaClient();
console.log("✅ Connected to local validator (http://127.0.0.1:8899)");
// Create keypairs
const fundAdmin = await generateKeyPairSigner();
const investorA = await generateKeyPairSigner();
const investorB = await generateKeyPairSigner();
console.log(`\n👤 Fund Administrator: ${fundAdmin.address}`);
console.log(`👤 Investor A: ${investorA.address}`);
console.log(`👤 Investor B: ${investorB.address}`);
// Create airdrop function
const airdrop = airdropFactory({
rpc: client.rpc,
rpcSubscriptions: client.rpcSubscriptions
});
// Fund accounts with SOL
console.log("\n💰 Airdropping SOL to accounts...");
await airdrop({
recipientAddress: fundAdmin.address,
lamports: lamports(10_000_000_000n),
commitment: "confirmed"
});
console.log(" ✅ Fund Admin: 10 SOL");
await airdrop({
recipientAddress: investorA.address,
lamports: lamports(2_000_000_000n),
commitment: "confirmed"
});
console.log(" ✅ Investor A: 2 SOL");
await airdrop({
recipientAddress: investorB.address,
lamports: lamports(2_000_000_000n),
commitment: "confirmed"
});
console.log(" ✅ Investor B: 2 SOL");
// ─────────────────────────────────────────────────────────────────
// STEP 1: Create Test USDC
// ─────────────────────────────────────────────────────────────────
printHeader("STEP 1: Creating Test USDC");
const usdcMint = await createTestUSDC(client, fundAdmin, fundAdmin);
// Mint USDC to participants
await mintTestUSDC(
client,
usdcMint,
fundAdmin,
investorA.address,
500,
"Investor A"
);
await mintTestUSDC(
client,
usdcMint,
fundAdmin,
investorB.address,
300,
"Investor B"
);
await mintTestUSDC(
client,
usdcMint,
fundAdmin,
fundAdmin.address,
1000,
"Fund Admin"
);
// ─────────────────────────────────────────────────────────────────
// STEP 2: Create NAV Strike Engine & Fund Token
// ─────────────────────────────────────────────────────────────────
printHeader("STEP 2: Creating Fund & NAV Strike Engine");
const engine = new NAVStrikeEngine(client, fundAdmin, "localnet");
const fundMint = await engine.createFundToken(fundAdmin, {
name: "Example Money Market Fund",
symbol: "EX-MMF",
uri: "Link to of chain meta data",
initialNAV: 1.0,
strikeSchedule: ["09:30", "12:00", "14:30", "16:00"],
decimals: 6
});
// ─────────────────────────────────────────────────────────────────
// STEP 3: Whitelist Investors
// ─────────────────────────────────────────────────────────────────
printHeader("STEP 3: Whitelisting Investors (KYC/AML)");
await engine.whitelistInvestor(fundMint, investorA.address, fundAdmin);
await engine.whitelistInvestor(fundMint, investorB.address, fundAdmin);
// ─────────────────────────────────────────────────────────────────
// STRIKE 1: 9:30 AM - Initial Subscriptions
// ─────────────────────────────────────────────────────────────────
printHeader("STRIKE 1: 9:30 AM - Initial Subscriptions");
// Investors delegate USDC and queue orders
await engine.delegateUSDCForSubscription(investorA, usdcMint, 250);
engine.queueOrder(investorA.address, "subscribe", 250);
await engine.delegateUSDCForSubscription(investorB, usdcMint, 150);
engine.queueOrder(investorB.address, "subscribe", 150);
// Execute strike at $1.00 NAV
await engine.executeStrike(fundMint, usdcMint, 1.0);
// ─────────────────────────────────────────────────────────────────
// STRIKE 2: 12:00 PM - Additional Subscription
// ─────────────────────────────────────────────────────────────────
printHeader("STRIKE 2: 12:00 PM - Additional Subscription");
// Investor A adds more
await engine.delegateUSDCForSubscription(investorA, usdcMint, 100);
engine.queueOrder(investorA.address, "subscribe", 100);
// Execute strike at $1.01 NAV (slight gain from interest)
await engine.executeStrike(fundMint, usdcMint, 1.01);
// ─────────────────────────────────────────────────────────────────
// STRIKE 3: 2:30 PM - Partial Redemption
// ─────────────────────────────────────────────────────────────────
printHeader("STRIKE 3: 2:30 PM - Partial Redemption");
// Investor B redeems 50 shares
await engine.delegateSharesForRedemption(investorB, fundMint, 50);
engine.queueOrder(investorB.address, "redeem", 50);
// Execute strike at $1.02 NAV
await engine.executeStrike(fundMint, usdcMint, 1.02);
// ─────────────────────────────────────────────────────────────────
// STRIKE 4: 4:00 PM - End of Day
// ─────────────────────────────────────────────────────────────────
printHeader("STRIKE 4: 4:00 PM - End of Day");
// No new orders, just NAV update
await engine.executeStrike(fundMint, usdcMint, 1.03);
// ─────────────────────────────────────────────────────────────────
// FINAL: Print Balances
// ─────────────────────────────────────────────────────────────────
printHeader("FINAL RESULTS");
await printBalances(client, fundMint, usdcMint, [
{ name: "Fund Admin", address: fundAdmin.address },
{ name: "Investor A", address: investorA.address },
{ name: "Investor B", address: investorB.address }
]);
// Print fund state
const fundState = engine.getFundState(fundMint);
console.log("\n📊 Fund State:");
console.log(` Current NAV: $${fundState.currentNAV.toFixed(6)}`);
console.log(` Total AUM: $${fundState.totalAUM.toLocaleString()}`);
console.log(
` Shares Outstanding: ${fundState.totalSharesOutstanding.toFixed(2)}`
);
console.log(` Last Strike: ${fundState.lastStrikeTime.toISOString()}`);
console.log(
"\n✅ Demo complete! NAV Strikes with Solana Kit working correctly."
);
console.log(
" View transactions on Solana Explorer (local validator - links shown above)\n"
);
}
// Run the demo
main().catch((error) => {
console.error("❌ Demo failed:", error);
process.exit(1);
});

Productieoverwegingen

Zorg ervoor dat u de volgende punten aanpakt voordat u naar productie implementeert:

  1. Beveiliging: Professioneel sleutelbeheer, multi-sig-controles en uitgebreide beveiligingsaudits van de codebase
  2. Naleving van regelgeving: Registratie van effecten, KYC/AML-systemen, overdrachtsbeperkingen en vereiste rapportage
  3. Sleutelbeheer: Institutionele bewaaroplossingen met adequate back-up en herstelprocedures
  4. Transactieverwerking: Prioriteitstarieven, logica voor herhaalpogingen, bevestigingsafhandeling en RPC-redundantie
  5. Fondsbeheer: NAV-berekening uit gezaghebbende bronnen, bewaarder- integratie en afstemming
  6. Monitoring: Real-time tracking, waarschuwingen en geautomatiseerde regelgevingsrapportage

Volgende Stappen

Na het begrijpen van NAV-koersen op Solana:

  1. Verken Token Extensions: Leer meer over andere Token 2022-extensies, zoals bijvoorbeeld permanente gedelegeerde voor aanvullende nalevingsfuncties

  2. Implementeer Token ACL: Voor verbeterde naleving, overweeg het gebruik van Token ACL om beleggers-whitelisting te beheren met toestemmingsvrije ontdooiing. Dit maakt zelfbedienings-KYC-verificatie mogelijk waarbij beleggers hun accounts automatisch kunnen activeren na het doorlopen van nalevingscontroles, wat de operationele overhead vermindert terwijl de regelgevingscontrole behouden blijft.

  3. Bestudeer DvP-afwikkeling: Zie onze Delivery vs Payment-handleiding voor effectenafwikkelingspatronen

  4. Productiearchitectuur: Ontwerp robuuste plannings-, monitoring- en rampenherstelsystemen

Conclusie

Solana's atomaire transactiemodel en Token Extensions bieden een krachtige fundament voor de implementatie van meerdere dagelijkse NAV-koersen voor geldmarktfondsen. De combinatie van:

  • Native atomaire uitvoering (geen smart contract-risico)
  • Sub-seconde finaliteit
  • Vrijwel nul transactiekosten
  • Onchain NAV-transparantie
  • Ingebouwde nalevingsfuncties (bevroren standaarden, metadata)

Maakt Solana een ideaal platform voor het moderniseren van fondsafwikkelingsinfrastructuur en het bieden van beleggers meer frequente handelsmogelijkheden.

De overgang van deze educatieve referentie naar productie vereist echter aanzienlijk extra werk op het gebied van beveiliging, naleving, bewaring en beheer. Werk altijd samen met gekwalificeerde juridische, regelgevende en technische experts bij het omgaan met fondstokenisatie.

Is this page helpful?

© 2026 Solana Foundation. Alle rechten voorbehouden.