Uderzenia NAV dla funduszy rynku pieniężnego na Solanie

Uderzenia NAV (Wartość Aktywów Netto) to stałe momenty w ciągu dnia handlowego, w których wyceniane są udziały funduszu i realizowane zlecenia. Tradycyjne fundusze mają zazwyczaj jedno dzienne uderzenie na zamknięcie rynku, jednak szybkość i niskie koszty Solany umożliwiają wielokrotne uderzenia śróddzienne, dając inwestorom większą elastyczność.

Czym jest NAV?

Fundusz to pula aktywów współposiadanych przez wielu inwestorów. NAV (Wartość Aktywów Netto) to po prostu cena jednego udziału w funduszu. Można to sobie wyobrazić następująco:

NAV = (Total Value of Everything in the Fund - liabilities) ÷ Number of Shares

Na przykład, jeśli fundusz posiada aktywa o wartości 10 milionów dolarów i ma 10 milionów udziałów w obrocie, każdy udział jest wart 1,00 USD.

Dlaczego NAV ma znaczenie?

  • Kupowanie udziałów (subskrypcja): Płacisz bieżące NAV. Jeśli NAV wynosi 1,02 USD i inwestujesz 102 USD, otrzymujesz 100 udziałów.
  • Sprzedaż udziałów (umorzenie): Otrzymujesz bieżące NAV. Jeśli umorzysz 100 udziałów przy NAV 1,02 USD, otrzymujesz 102 USD.

Fundusze rynku pieniężnego zazwyczaj utrzymują stabilne NAV na poziomie około 1,00 USD, z niewielkimi wahaniami wynikającymi z naliczonych odsetek.

Problem

Kiedy inwestujesz w fundusz rynku pieniężnego, tradycyjnie dwie rzeczy dzieją się w różnym czasie:

  1. Składasz zlecenie → Czekasz na zamknięcie rynku
  2. NAV obliczane → Udziały emitowane/umarzane w T+1 lub T+2

Powoduje to kilka problemów:

  • Opóźniona realizacja: Zlecenia złożone rano czekają do godziny 16:00
  • Opóźnienie rozliczenia: Twoje środki są w zawieszeniu przez 1–2 dni
  • Ograniczona elastyczność: Tylko jedna szansa na transakcję dziennie
  • Nieaktualna wycena: NAV może być nieaktualne między złożeniem zlecenia a jego realizacją

Rozwiązanie

Uderzenia NAV na Solanie umożliwiają wielokrotne dzienne okna rozliczeniowe z atomową realizacją. Zlecenia kolejkują się i są wykonywane natychmiast w każdym momencie uderzenia według bieżącego NAV.

┌─────────────────────────────────────────────────────────────┐
│ MULTIPLE DAILY NAV STRIKES │
├─────────────────────────────────────────────────────────────┤
│ │
│ 9:30 AM 12:00 PM 2:30 PM 4:00 PM │
│ │ │ │ │ │
│ ▼ ▼ ▼ ▼ │
│ ┌─────┐ ┌─────┐ ┌─────┐ ┌─────┐ │
│ │STRIKE│ │STRIKE│ │STRIKE│ │STRIKE│ │
│ │NAV=$1│ │NAV=$1│ │NAV=$1│ │NAV=$1│ │
│ │.0012 │ │.0015 │ │.0018 │ │.0020 │ │
│ └─────┘ └─────┘ └─────┘ └─────┘ │
│ │ │ │ │ │
│ ▼ ▼ ▼ ▼ │
│ Process Process Process Process │
│ Orders Orders Orders Orders │
│ │
│ ✅ Atomic settlement at each strike │
│ ✅ NAV stored onchain in token metadata │
│ ✅ Less stale prices │
│ │
└─────────────────────────────────────────────────────────────┘

Ten przewodnik pokazuje, jak wdrożyć uderzenia NAV na Solanie, używając rozszerzeń SPL Token 2022 do zgodnej z przepisami emisji udziałów funduszu oraz standardowego USDC do rozliczenia – wszystko bez pisania własnych programów w Rust.

Implementacja referencyjna do celów edukacyjnych

Możesz użyć kodu źródłowego tej implementacji, aby wypróbować uderzenia NAV lokalnie.

Niniejszy przewodnik udostępnia implementację referencyjną wyłącznie do celów eksploracji i edukacji. NIE używaj tego kodu bezpośrednio w środowisku produkcyjnym bez:

  • Kompleksowych audytów bezpieczeństwa
  • Właściwych systemów zarządzania kluczami
  • Przeglądu zgodności z przepisami
  • Konsultacji prawnych
  • Rozległych testów i modyfikacji

Przegląd architektury

System uderzeń NAV składa się z następujących kluczowych komponentów:

  1. Token udziałów funduszu: SPL Token 2022 z metadanymi przechowującymi NAV onchain
  2. Waluta rozliczeniowa: Standardowe USDC (istniejący token SPL)
  3. Administrator funduszu: Orkiestruje uderzenia za pomocą delegowanych uprawnień
  4. System whitelist: Kontroluje, które adresy mogą posiadać udziały funduszu

Kluczowe zasady projektowania

  • Brak własnych programów: Używa wyłącznie Token Extensions Program i standardowego USDC
  • Atomowe rozliczenie: Pojedyncza transakcja zapewnia, że subskrypcja/umorzenie kończy się sukcesem lub niepowodzeniem jako całość
  • Domyślny stan zamrożenia: Udziały wymagają jawnego dodania do whitelist w celu zachowania zgodności z przepisami
  • Delegowane uprawnienia: Administrator funduszu działa bez przejmowania kontroli nad aktywami
  • NAV onchain: Bieżąca cena przechowywana w metadanych tokena, publicznie weryfikowalna

Etap 1: Konfiguracja funduszu

  1. Utwórz token udziałów funduszu z rozszerzeniami metadanych
  2. Zainicjuj NAV na poziomie 1,00 USD
  3. Ustaw dzienny harmonogram uderzeń
  4. Dodaj inwestorów instytucjonalnych do whitelist

Etap 2: Okres przed uderzeniem

  1. Inwestorzy składają wnioski o subskrypcję/umorzenie
  2. Zlecenia kolejkują się na następny moment uderzenia
  3. Fundusz oblicza wstępne NAV
  4. Przeprowadzane są kontrole ryzyka

Etap 3: Realizacja uderzenia NAV

At Strike Time (e.g., 14:30):
├── Calculate final NAV from underlying assets
├── Update onchain NAV in metadata
├── Process all pending subscriptions atomically
│ └── USDC → Fund Shares at exact NAV
├── Process all pending redemptions atomically
│ └── Fund Shares → USDC at exact NAV
└── Emit strike completion event
✅ STRIKE COMPLETE (all trades at same NAV)

Etap 4: Po uderzeniu

  1. Generuj potwierdzenia transakcji
  2. Aktualizuj skład funduszu
  3. Przygotuj się na następne uderzenie
  4. Dokonaj uzgodnienia z depozytariuszem

Wzorzec delegowanych uprawnień

Inwestorzy z góry upoważniają administratora funduszu do przenoszenia ich tokenów, a następnie administrator wykonuje operacje w momencie uderzenia bez konieczności uzyskiwania podpisów inwestorów:

┌──────────┐ delegates ┌────────────────────┐ delegates ┌──────────┐
│ Investor │ ───────────────→ │ Fund Administrator │ ←────────────── │ Investor │
│ A │ (USDC) │ (trusted) │ (shares) │ B │
└──────────┘ │ │ └──────────┘
│ executes strike │
│ (atomic txns) │
└────────────────────┘

Przepływ subskrypcji (USDC → Udziały funduszu)

Investor wants to invest $100,000 USDC
Current NAV = $1.000234 per share
────────────────────────────────────
1. Investor approves $100,000 USDC delegation
2. At strike time, atomic transaction:
├── Transfer $100,000 USDC from investor
├── Calculate shares: 100,000 / 1.000234 = 99,976.61
└── Mint 99,976.61 fund shares to investor
3. Settlement complete in <1 second

Przepływ umorzenia (Udziały funduszu → USDC)

Investor wants to redeem 50,000 shares
Current NAV = $1.000234 per share
────────────────────────────────────
1. Investor approves 50,000 shares delegation
2. At strike time, atomic transaction:
├── Burn 50,000 fund shares from investor
├── Calculate USDC: 50,000 × 1.000234 = $50,011.70
└── Transfer $50,011.70 USDC to investor
3. Settlement complete in <1 second

Dlaczego Solana do uderzeń NAV?

Architektura Solany zapewnia znaczące przewagi nad tradycyjnym rozliczaniem funduszy:

AspektTradycyjny (T+1)Uderzenia NAV na Solanie
Logika rozliczeniaAgenci transferowiAtomowe grupowanie transakcji
Czas rozliczenia1–2 dni<1 sekunda
Koszt transakcji50–200 USD<0,01 USD
Uderzeń dziennie14+ (konfigurowalne)
Ryzyko nieaktualnych cenWysokieNiższe
Transparentność NAVRaport na koniec dniaOnchain, w czasie rzeczywistym

Atomowe transakcje Solany eliminują pośredników, zapewniając jednocześnie natychmiastowe, tanie i bezpieczne rozliczenia z transparentnością NAV onchain.

Token funduszu z Token Extensions

SPL Token 2022 zapewnia zaawansowane rozszerzenia umożliwiające zgodną z przepisami emisję udziałów funduszu bez własnych programów:

Niezbędne rozszerzenia dla udziałów funduszu

  1. Rozszerzenie domyślnego stanu konta: Ustawia wszystkie nowe token account domyślnie jako zamrożone, wymagając jawnego dodania do whitelist (zgodność z KYC/AML)
  2. Rozszerzenie metadanych: Przechowuje NAV, harmonogram uderzeń i AUM onchain dla zapewnienia transparentności

Konfiguracja uprawnień

  • Uprawnienie do mintowania: Administrator funduszu (kontroluje emisję udziałów)
  • Uprawnienie do zamrażania: Administrator funduszu (zarządza whitelistą)
  • Uprawnienie do aktualizacji: Administrator funduszu (aktualizuje metadane NAV)

Domyślny stan zamrożenia jest kluczowy dla zgodności z przepisami. Zapewnia, że tylko jawnie dodane do whitelist (zweryfikowane w procesie KYC) adresy mogą otrzymywać i posiadać udziały funduszu.

Pola metadanych onchain

{
"name": "Example Money Market Fund",
"symbol": "EX-MMF",
"currentNAV": "1.000234",
"lastStrikeTime": "2024-01-15T14:30:00Z",
"strikeSchedule": "[\"09:30\", \"12:00\", \"14:30\", \"16:00\"]",
"totalAUM": "50000000.00",
"fundType": "Money Market Fund"
}

Kompletna implementacja uderzeń NAV

Konfiguracja silnika uderzeń NAV

Należy zauważyć, że w tym przewodniku używamy biblioteki @solana/kit do stworzenia silnika uderzeń NAV. Implementację w web3.js można również znaleźć w kodzie źródłowym. Najpierw utwórz główną klasę silnika obsługującą wszystkie operacje funduszu:

/**
* NAV Strikes Engine - Solana Kit Reference Implementation
*
* This implementation demonstrates NAV strikes for money market funds on Solana using:
* - SPL Token 2022 with Default Account State extension for fund shares
* - Standard USDC for settlement
* - Atomic transactions for subscription/redemption
* - Delegated authority pattern for fund administrator
*
* Built with @solana/kit (web3.js 2.0)
*
* ⚠️ IMPORTANT: This is a reference implementation for educational purposes.
* Do NOT use in production without proper audits and security reviews.
*/
import {
Address,
airdropFactory,
appendTransactionMessageInstructions,
createSolanaRpc,
createSolanaRpcSubscriptions,
createTransactionMessage,
generateKeyPairSigner,
getSignatureFromTransaction,
KeyPairSigner,
lamports,
pipe,
sendAndConfirmTransactionFactory,
setTransactionMessageFeePayerSigner,
setTransactionMessageLifetimeUsingBlockhash,
signTransactionMessageWithSigners,
Rpc,
RpcSubscriptions,
SolanaRpcApi,
SolanaRpcSubscriptionsApi
} from "@solana/kit";
import { getCreateAccountInstruction } from "@solana-program/system";
import {
TOKEN_PROGRAM_ADDRESS,
getApproveInstruction,
getTransferCheckedInstruction,
getMintToInstruction,
getBurnInstruction,
findAssociatedTokenPda,
getCreateAssociatedTokenInstruction
} from "@solana-program/token";
import {
TOKEN_2022_PROGRAM_ADDRESS,
getInitializeMintInstruction,
getInitializeTokenMetadataInstruction,
getUpdateTokenMetadataFieldInstruction,
tokenMetadataField,
getThawAccountInstruction,
getFreezeAccountInstruction,
AccountState,
getMintSize,
extension,
getPreInitializeInstructionsForMintExtensions,
fetchMaybeToken
} from "@solana-program/token-2022";
import { pack } from "@solana/spl-token-metadata";
import { PublicKey } from "@solana/web3.js";
// TLV (Type-Length-Value) sizes for Token-2022 extensions
const TYPE_SIZE = 2;
const LENGTH_SIZE = 2;
import type {
FundTokenConfig,
FundState,
SubscriptionParams,
RedemptionParams,
SubscriptionResult,
RedemptionResult,
StrikeResult,
StrikeOrder,
SolanaClient
} from "./types";
/**
* Cluster type for explorer links
*/
export type ClusterType = "mainnet-beta" | "devnet" | "testnet" | "localnet";
/**
* Generate Solana Explorer link for a transaction
*/
export function getExplorerLink(
signature: string,
cluster: ClusterType = "localnet"
): string {
const baseUrl = "https://explorer.solana.com/tx";
if (cluster === "localnet") {
return `${baseUrl}/${signature}?cluster=custom&customUrl=http%3A%2F%2Flocalhost%3A8899`;
}
return `${baseUrl}/${signature}?cluster=${cluster}`;
}
/**
* Generate Solana Explorer link for an account/address
*/
export function getAddressExplorerLink(
addr: string,
cluster: ClusterType = "localnet"
): string {
const baseUrl = "https://explorer.solana.com/address";
if (cluster === "localnet") {
return `${baseUrl}/${addr}?cluster=custom&customUrl=http%3A%2F%2Flocalhost%3A8899`;
}
return `${baseUrl}/${addr}?cluster=${cluster}`;
}
/**
* Create a Solana client for Kit
*/
export async function createSolanaClient(
rpcUrl: string = "http://127.0.0.1:8899",
wsUrl: string = "ws://127.0.0.1:8900"
): Promise<SolanaClient> {
const rpc = createSolanaRpc(rpcUrl);
const rpcSubscriptions = createSolanaRpcSubscriptions(wsUrl);
const sendAndConfirmTransaction = sendAndConfirmTransactionFactory({
rpc,
rpcSubscriptions
});
return {
rpc,
rpcSubscriptions,
sendAndConfirmTransaction
};
}
/**
* NAV Strike Engine - Solana Kit Version
*
* Manages the lifecycle of a money market fund on Solana:
* - Creates fund tokens with Token 2022 extensions
* - Updates NAV at scheduled strike times
* - Processes subscription and redemption orders atomically
*/
export class NAVStrikeEngine {
private client: SolanaClient;
private fundAdministrator: KeyPairSigner;
private cluster: ClusterType;
// Fund state
private currentNAV: number = 1.0;
private totalAUM: number = 0;
private totalSharesOutstanding: number = 0;
private strikeSchedule: string[] = [];
private lastStrikeTime: Date = new Date();
// Order queue
private pendingOrders: StrikeOrder[] = [];
private orderCounter: number = 0;
constructor(
client: SolanaClient,
fundAdministrator: KeyPairSigner,
cluster: ClusterType = "localnet"
) {
this.client = client;
this.fundAdministrator = fundAdministrator;
this.cluster = cluster;
}
/**
* Helper to send and confirm transactions with correct typing
* Works around stricter types in @solana/kit v5+
*/
// eslint-disable-next-line @typescript-eslint/no-explicit-any
private async sendTransaction(
signedTx: any,
commitment: "confirmed" | "finalized" = "confirmed"
): Promise<void> {
await this.client.sendAndConfirmTransaction(signedTx, { commitment });
}
/**
* Get explorer link for a transaction signature
*/
getTxExplorerLink(signature: string): string {
return getExplorerLink(signature, this.cluster);
}
/**
* Get explorer link for an address
*/
getAddressLink(addr: string): string {
return getAddressExplorerLink(addr, this.cluster);
}
/**
* Creates a fund share token using Token-2022 with Default Account State and Metadata extensions
* Fund shares are frozen by default and require whitelisting
* Metadata stores NAV and fund information onchain
*/
async createFundToken(
issuer: KeyPairSigner,
config: FundTokenConfig
): Promise<Address> {
console.log(
"\n╔══════════════════════════════════════════════════════════════╗"
);
console.log(
"║ NAV STRIKE - FUND CREATION (Kit) ║"
);
console.log(
"╚══════════════════════════════════════════════════════════════╝"
);
console.log(`\n🏗️ Creating fund token with Token-2022 + Metadata...`);
console.log(` Name: ${config.name}`);
console.log(` Symbol: ${config.symbol}`);
console.log(` Initial NAV: $${config.initialNAV.toFixed(6)}`);
console.log(` Strike Schedule: ${config.strikeSchedule.join(", ")}`);
// Generate new keypair for the mint
const mint = await generateKeyPairSigner();
const decimals = config.decimals ?? 6;
// Define extensions
const defaultAccountStateExtension = extension("DefaultAccountState", {
state: AccountState.Frozen
});
const metadataPointerExtension = extension("MetadataPointer", {
authority: this.fundAdministrator.address,
metadataAddress: mint.address
});
const extensions = [defaultAccountStateExtension, metadataPointerExtension];
// Calculate mint size without metadata
const baseMintSize = getMintSize(extensions);
// Create metadata object to calculate EXACT size using pack()
// Note: PublicKey is only used here for size calculation, not for transaction building
const metadataForSizing = {
mint: new PublicKey(mint.address),
name: config.name,
symbol: config.symbol,
uri: config.uri || "",
additionalMetadata: [
["icon-uri", "link to icon"], // Max NAV format
["currentNAV", "999999.999999"], // Max NAV format
["lastStrikeTime", "2099-12-31T23:59:59.999Z"], // Max ISO timestamp
["strikeSchedule", JSON.stringify(config.strikeSchedule)],
["totalAUM", "999999999999999.99"], // Max AUM (quadrillions)
["fundType", "Money Market Fund"]
] as [string, string][]
};
// Calculate exact metadata size using pack()
const metadataLen = pack(metadataForSizing).length;
// MetadataExtension TLV overhead: 2 bytes for type, 2 bytes for length
const metadataExtensionOverhead = TYPE_SIZE + LENGTH_SIZE;
// Add safety buffer for any encoding overhead
const totalSpace =
baseMintSize + metadataLen + metadataExtensionOverhead + 100;
// Get rent for total space
const mintRent = await this.client.rpc
.getMinimumBalanceForRentExemption(BigInt(totalSpace))
.send();
// Build create account instruction (with base size, but extra rent for metadata)
const createAccountIx = getCreateAccountInstruction({
payer: issuer,
newAccount: mint,
lamports: lamports(mintRent),
space: baseMintSize,
programAddress: TOKEN_2022_PROGRAM_ADDRESS
});
// Get extension initialization instructions
const preInitIxs = getPreInitializeInstructionsForMintExtensions(
mint.address,
extensions
);
// Initialize mint instruction (Token 2022)
const initMintIx = getInitializeMintInstruction({
mint: mint.address,
decimals,
mintAuthority: this.fundAdministrator.address,
freezeAuthority: this.fundAdministrator.address
});
// Initialize metadata instruction
const initMetadataIx = getInitializeTokenMetadataInstruction({
metadata: mint.address,
updateAuthority: this.fundAdministrator.address,
mint: mint.address,
mintAuthority: this.fundAdministrator,
name: config.name,
symbol: config.symbol,
uri: ""
});
// Build custom metadata field update instructions
const initialMetadata: [string, string][] = [
["currentNAV", config.initialNAV.toFixed(6)],
["lastStrikeTime", new Date().toISOString()],
["strikeSchedule", JSON.stringify(config.strikeSchedule)],
["totalAUM", "0.00"],
["fundType", "Money Market Fund"]
];
const updateFieldIxs = initialMetadata.map(([key, value]) =>
getUpdateTokenMetadataFieldInstruction({
metadata: mint.address,
updateAuthority: this.fundAdministrator,
field: tokenMetadataField("Key", [key]),
value
})
);
// Get latest blockhash
const { value: latestBlockhash } = await this.client.rpc
.getLatestBlockhash()
.send();
// Build transaction message
const transactionMessage = pipe(
createTransactionMessage({ version: 0 }),
(tx) => setTransactionMessageFeePayerSigner(issuer, tx),
(tx) => setTransactionMessageLifetimeUsingBlockhash(latestBlockhash, tx),
(tx) =>
appendTransactionMessageInstructions(
[
createAccountIx,
...preInitIxs,
initMintIx,
initMetadataIx,
...updateFieldIxs
],
tx
)
);
// Sign and send
const signedTransaction =
await signTransactionMessageWithSigners(transactionMessage);
const signature = getSignatureFromTransaction(signedTransaction);
await this.sendTransaction(signedTransaction);
// Update internal state
this.currentNAV = config.initialNAV;
this.strikeSchedule = config.strikeSchedule;
this.lastStrikeTime = new Date();
console.log(`\n✅ Fund token created: ${mint.address}`);
console.log(` Mint Authority: ${this.fundAdministrator.address}`);
console.log(` Freeze Authority: ${this.fundAdministrator.address}`);
console.log(` Default State: FROZEN (requires whitelisting)`);
console.log(` ✨ Metadata: ON-CHAIN`);
console.log(` - NAV: $${config.initialNAV.toFixed(6)}`);
console.log(` - Schedule: ${config.strikeSchedule.join(", ")}`);
console.log(` 🔗 Token: ${this.getAddressLink(mint.address)}`);
console.log(` 🔗 Tx: ${this.getTxExplorerLink(signature)}`);
return mint.address;
}

Dynamiczne aktualizacje metadanych

W przypadku udziałów funduszu pola currentNAV, lastStrikeTime i totalAUM są aktualizowane onchain przy każdym uderzeniu NAV za pomocą getUpdateTokenMetadataFieldInstruction. Zapewnia to:

  • Widoczność NAV w czasie rzeczywistym dla wszystkich uczestników
  • Ścieżkę audytu wszystkich aktualizacji NAV onchain
  • Integrację z protokołami DeFi, które mogą odczytywać metadane onchain
/**
* Updates NAV onchain in token metadata
*/
async updateNAV(fundMint: Address, newNAV: number): Promise<string> {
const previousNAV = this.currentNAV;
this.currentNAV = newNAV;
this.lastStrikeTime = new Date();
// Build update field instructions
const updateNavIx = getUpdateTokenMetadataFieldInstruction({
metadata: fundMint,
updateAuthority: this.fundAdministrator,
field: tokenMetadataField("Key", ["currentNAV"]),
value: newNAV.toFixed(6)
});
const updateTimeIx = getUpdateTokenMetadataFieldInstruction({
metadata: fundMint,
updateAuthority: this.fundAdministrator,
field: tokenMetadataField("Key", ["lastStrikeTime"]),
value: this.lastStrikeTime.toISOString()
});
const updateAumIx = getUpdateTokenMetadataFieldInstruction({
metadata: fundMint,
updateAuthority: this.fundAdministrator,
field: tokenMetadataField("Key", ["totalAUM"]),
value: this.totalAUM.toFixed(2)
});
const { value: latestBlockhash } = await this.client.rpc
.getLatestBlockhash()
.send();
const transactionMessage = pipe(
createTransactionMessage({ version: 0 }),
(tx) => setTransactionMessageFeePayerSigner(this.fundAdministrator, tx),
(tx) => setTransactionMessageLifetimeUsingBlockhash(latestBlockhash, tx),
(tx) =>
appendTransactionMessageInstructions(
[updateNavIx, updateTimeIx, updateAumIx],
tx
)
);
const signedTransaction =
await signTransactionMessageWithSigners(transactionMessage);
const signature = getSignatureFromTransaction(signedTransaction);
await this.sendTransaction(signedTransaction);
const navChange = ((newNAV - previousNAV) / previousNAV) * 100;
const changeSymbol = navChange >= 0 ? "▲" : "▼";
console.log(
` NAV Updated: $${previousNAV.toFixed(6)} → $${newNAV.toFixed(
6
)} (${changeSymbol}${Math.abs(navChange).toFixed(4)}%)`
);
console.log(` 🔗 Explorer: ${this.getTxExplorerLink(signature)}`);
return signature;
}
/**
* Whitelists an investor by creating their fund account and thawing it
*/
async whitelistInvestor(
fundMint: Address,
investor: Address,
payer: KeyPairSigner
): Promise<Address> {
console.log(`\n🔓 Whitelisting investor: ${investor.slice(0, 20)}...`);
// Find the ATA
const [ata] = await findAssociatedTokenPda({
mint: fundMint,
owner: investor,
tokenProgram: TOKEN_2022_PROGRAM_ADDRESS
});
const maybeToken = await fetchMaybeToken(this.client.rpc, ata, {
commitment: "confirmed"
});
const { value: latestBlockhash } = await this.client.rpc
.getLatestBlockhash()
.send();
if (!maybeToken.exists) {
// Create ATA
const createAtaIx = getCreateAssociatedTokenInstruction({
payer,
owner: investor,
mint: fundMint,
ata,
tokenProgram: TOKEN_2022_PROGRAM_ADDRESS
});
const createAtaMsg = pipe(
createTransactionMessage({ version: 0 }),
(tx) => setTransactionMessageFeePayerSigner(payer, tx),
(tx) =>
setTransactionMessageLifetimeUsingBlockhash(latestBlockhash, tx),
(tx) => appendTransactionMessageInstructions([createAtaIx], tx)
);
const signedCreateAta =
await signTransactionMessageWithSigners(createAtaMsg);
await this.sendTransaction(signedCreateAta);
}
// Thaw the account
const thawIx = getThawAccountInstruction({
account: ata,
mint: fundMint,
owner: this.fundAdministrator
});
const thawMsg = pipe(
createTransactionMessage({ version: 0 }),
(tx) => setTransactionMessageFeePayerSigner(payer, tx),
(tx) => setTransactionMessageLifetimeUsingBlockhash(latestBlockhash, tx),
(tx) => appendTransactionMessageInstructions([thawIx], tx)
);
const signedThaw = await signTransactionMessageWithSigners(thawMsg);
await this.sendTransaction(signedThaw);
console.log(` Account: ${ata}`);
console.log(`✅ Investor whitelisted and account thawed`);
return ata;
}
/**
* Removes an investor from whitelist by freezing their account
*/
async removeFromWhitelist(
fundMint: Address,
investorFundAccount: Address,
payer: KeyPairSigner
): Promise<void> {
console.log(`\n🔒 Removing from whitelist: ${investorFundAccount}`);
const { value: latestBlockhash } = await this.client.rpc
.getLatestBlockhash()
.send();
const freezeIx = getFreezeAccountInstruction({
account: investorFundAccount,
mint: fundMint,
owner: this.fundAdministrator
});
const freezeMsg = pipe(
createTransactionMessage({ version: 0 }),
(tx) => setTransactionMessageFeePayerSigner(payer, tx),
(tx) => setTransactionMessageLifetimeUsingBlockhash(latestBlockhash, tx),
(tx) => appendTransactionMessageInstructions([freezeIx], tx)
);
const signedFreeze = await signTransactionMessageWithSigners(freezeMsg);
await this.sendTransaction(signedFreeze);
console.log(`✅ Account frozen and removed from whitelist`);
}
/**
* Delegates USDC authority to fund administrator for subscription
*/
async delegateUSDCForSubscription(
investor: KeyPairSigner,
usdcMint: Address,
amount: number
): Promise<void> {
const [investorUSDC] = await findAssociatedTokenPda({
mint: usdcMint,
owner: investor.address,
tokenProgram: TOKEN_PROGRAM_ADDRESS
});
console.log(`\n🤝 Delegating USDC for subscription...`);
console.log(` Amount: $${amount.toLocaleString()}`);
const { value: latestBlockhash } = await this.client.rpc
.getLatestBlockhash()
.send();
const approveIx = getApproveInstruction({
source: investorUSDC,
delegate: this.fundAdministrator.address,
owner: investor,
amount: BigInt(amount * 1e6)
});
const approveMsg = pipe(
createTransactionMessage({ version: 0 }),
(tx) => setTransactionMessageFeePayerSigner(investor, tx),
(tx) => setTransactionMessageLifetimeUsingBlockhash(latestBlockhash, tx),
(tx) => appendTransactionMessageInstructions([approveIx], tx)
);
const signedApprove = await signTransactionMessageWithSigners(approveMsg);
await this.sendTransaction(signedApprove);
console.log(`✅ USDC delegation approved`);
}
/**
* Delegates fund shares authority to administrator for redemption
*/
async delegateSharesForRedemption(
investor: KeyPairSigner,
fundMint: Address,
shareAmount: number
): Promise<void> {
const [investorShares] = await findAssociatedTokenPda({
mint: fundMint,
owner: investor.address,
tokenProgram: TOKEN_2022_PROGRAM_ADDRESS
});
console.log(`\n🤝 Delegating shares for redemption...`);
console.log(` Shares: ${shareAmount.toLocaleString()}`);
const { value: latestBlockhash } = await this.client.rpc
.getLatestBlockhash()
.send();
const approveIx = getApproveInstruction(
{
source: investorShares,
delegate: this.fundAdministrator.address,
owner: investor,
amount: BigInt(Math.floor(shareAmount * 1e6))
},
{ programAddress: TOKEN_2022_PROGRAM_ADDRESS }
);
const approveMsg = pipe(
createTransactionMessage({ version: 0 }),
(tx) => setTransactionMessageFeePayerSigner(investor, tx),
(tx) => setTransactionMessageLifetimeUsingBlockhash(latestBlockhash, tx),
(tx) => appendTransactionMessageInstructions([approveIx], tx)
);
const signedApprove = await signTransactionMessageWithSigners(approveMsg);
await this.sendTransaction(signedApprove);
console.log(`✅ Share delegation approved`);
}
/**
* Executes atomic subscription: USDC → Fund Shares at current NAV
*/
async processSubscription(
params: SubscriptionParams
): Promise<SubscriptionResult> {
const { fundMint, usdcMint, investor, usdcAmount } = params;
// Calculate shares at current NAV
const sharesToMint = usdcAmount / this.currentNAV;
const shortAddr = `${investor.slice(0, 4)}...${investor.slice(-4)}`;
console.log(`\n⚡ Processing subscription...`);
console.log(` Investor: ${shortAddr}`);
console.log(` USDC Amount: $${usdcAmount.toLocaleString()}`);
console.log(` NAV: $${this.currentNAV.toFixed(6)}`);
console.log(` Shares to mint: ${sharesToMint.toFixed(6)}`);
// Get token accounts
const [investorUSDC] = await findAssociatedTokenPda({
mint: usdcMint,
owner: investor,
tokenProgram: TOKEN_PROGRAM_ADDRESS
});
const [fundUSDC] = await findAssociatedTokenPda({
mint: usdcMint,
owner: this.fundAdministrator.address,
tokenProgram: TOKEN_PROGRAM_ADDRESS
});
const [investorShares] = await findAssociatedTokenPda({
mint: fundMint,
owner: investor,
tokenProgram: TOKEN_2022_PROGRAM_ADDRESS
});
const { value: latestBlockhash } = await this.client.rpc
.getLatestBlockhash()
.send();
// Build atomic transaction with both instructions
// 1. Transfer USDC from investor to fund (using delegated authority)
const transferUSDCIx = getTransferCheckedInstruction({
source: investorUSDC,
mint: usdcMint,
destination: fundUSDC,
authority: this.fundAdministrator,
amount: BigInt(Math.floor(usdcAmount * 1e6)),
decimals: 6
});
// 2. Mint fund shares to investor
const mintSharesIx = getMintToInstruction(
{
mint: fundMint,
token: investorShares,
mintAuthority: this.fundAdministrator,
amount: BigInt(Math.floor(sharesToMint * 1e6))
},
{ programAddress: TOKEN_2022_PROGRAM_ADDRESS }
);
const txMessage = pipe(
createTransactionMessage({ version: 0 }),
(tx) => setTransactionMessageFeePayerSigner(this.fundAdministrator, tx),
(tx) => setTransactionMessageLifetimeUsingBlockhash(latestBlockhash, tx),
(tx) =>
appendTransactionMessageInstructions([transferUSDCIx, mintSharesIx], tx) // <- Both happen at the same time
);
const signedTx = await signTransactionMessageWithSigners(txMessage);
const signature = getSignatureFromTransaction(signedTx);
await this.sendTransaction(signedTx);
// Update fund state
this.totalAUM += usdcAmount;
this.totalSharesOutstanding += sharesToMint;
console.log(`✅ SUBSCRIPTION SETTLED ATOMICALLY`);
console.log(` Shares issued: ${sharesToMint.toFixed(6)}`);
console.log(` New AUM: $${this.totalAUM.toLocaleString()}`);
console.log(` 🔗 Explorer: ${this.getTxExplorerLink(signature)}`);
return {
signature,
usdcAmount,
sharesIssued: sharesToMint,
executionNAV: this.currentNAV,
timestamp: new Date()
};
}
/**
* Executes atomic redemption: Fund Shares → USDC at current NAV
*/
async processRedemption(params: RedemptionParams): Promise<RedemptionResult> {
const { fundMint, usdcMint, investor, shareAmount } = params;
// Calculate USDC at current NAV
const usdcToPay = shareAmount * this.currentNAV;
const shortAddr = `${investor.slice(0, 4)}...${investor.slice(-4)}`;
console.log(`\n⚡ Processing redemption...`);
console.log(` Investor: ${shortAddr}`);
console.log(` Shares to redeem: ${shareAmount.toLocaleString()}`);
console.log(` NAV: $${this.currentNAV.toFixed(6)}`);
console.log(` USDC to pay: $${usdcToPay.toFixed(2)}`);
// Get token accounts
const [investorShares] = await findAssociatedTokenPda({
mint: fundMint,
owner: investor,
tokenProgram: TOKEN_2022_PROGRAM_ADDRESS
});
const [investorUSDC] = await findAssociatedTokenPda({
mint: usdcMint,
owner: investor,
tokenProgram: TOKEN_PROGRAM_ADDRESS
});
const [fundUSDC] = await findAssociatedTokenPda({
mint: usdcMint,
owner: this.fundAdministrator.address,
tokenProgram: TOKEN_PROGRAM_ADDRESS
});
const { value: latestBlockhash } = await this.client.rpc
.getLatestBlockhash()
.send();
// Build atomic transaction with both instructions
// 1. Burn fund shares from investor (using delegated authority)
const burnSharesIx = getBurnInstruction(
{
account: investorShares,
mint: fundMint,
authority: this.fundAdministrator,
amount: BigInt(Math.floor(shareAmount * 1e6))
},
{ programAddress: TOKEN_2022_PROGRAM_ADDRESS }
);
// 2. Transfer USDC from fund to investor
const transferUSDCIx = getTransferCheckedInstruction({
source: fundUSDC,
mint: usdcMint,
destination: investorUSDC,
authority: this.fundAdministrator,
amount: BigInt(Math.floor(usdcToPay * 1e6)),
decimals: 6
});
const txMessage = pipe(
createTransactionMessage({ version: 0 }),
(tx) => setTransactionMessageFeePayerSigner(this.fundAdministrator, tx),
(tx) => setTransactionMessageLifetimeUsingBlockhash(latestBlockhash, tx),
(tx) =>
appendTransactionMessageInstructions([burnSharesIx, transferUSDCIx], tx)
);
const signedTx = await signTransactionMessageWithSigners(txMessage);
const signature = getSignatureFromTransaction(signedTx);
await this.sendTransaction(signedTx);
// Update fund state
this.totalAUM -= usdcToPay;
this.totalSharesOutstanding -= shareAmount;
console.log(`✅ REDEMPTION SETTLED ATOMICALLY`);
console.log(` USDC paid: $${usdcToPay.toFixed(2)}`);
console.log(` New AUM: $${this.totalAUM.toLocaleString()}`);
console.log(` 🔗 Explorer: ${this.getTxExplorerLink(signature)}`);
return {
signature,
sharesRedeemed: shareAmount,
usdcPaid: usdcToPay,
executionNAV: this.currentNAV,
timestamp: new Date()
};
}
/**
* Queue an order for the next NAV strike
*/
queueOrder(
investor: Address,
orderType: "subscribe" | "redeem",
amount: number
): StrikeOrder {
const order: StrikeOrder = {
orderId: `ORD-${++this.orderCounter}`,
investor,
orderType,
amount,
strikeTime: this.getNextStrikeTime(),
status: "pending"
};
this.pendingOrders.push(order);
const shortAddr = `${investor.slice(0, 4)}...${investor.slice(-4)}`;
console.log(`\n📝 Order queued: ${order.orderId}`);
console.log(` Investor: ${shortAddr}`);
console.log(` Type: ${orderType}`);
console.log(
` Amount: ${
orderType === "subscribe"
? `$${amount.toLocaleString()} USDC`
: `${amount.toLocaleString()} shares`
}`
);
return order;
}
/**
* Execute NAV strike - update NAV and process all pending orders
*/
async executeStrike(
fundMint: Address,
usdcMint: Address,
newNAV: number
): Promise<StrikeResult> {
const strikeId = `STRIKE-${Date.now()}`;
const strikeTime = new Date();
console.log(
"\n╔══════════════════════════════════════════════════════════════╗"
);
console.log(
"║ NAV STRIKE EXECUTION ║"
);
console.log(
"╚══════════════════════════════════════════════════════════════╝"
);
console.log(` Strike ID: ${strikeId}`);
console.log(` Strike Time: ${strikeTime.toISOString()}`);
console.log(` New NAV: $${newNAV.toFixed(6)}`);
console.log(` Pending Orders: ${this.pendingOrders.length}`);
console.log(
"────────────────────────────────────────────────────────────────"
);
// 1. Update NAV
await this.updateNAV(fundMint, newNAV);
// 2. Process pending orders
const signatures: string[] = [];
let totalUSDCSubscribed = 0;
let totalSharesMinted = 0;
let totalSharesRedeemed = 0;
let totalUSDCPaid = 0;
let subscriptionsProcessed = 0;
let redemptionsProcessed = 0;
const subscriptions = this.pendingOrders.filter(
(o) => o.orderType === "subscribe" && o.status === "pending"
);
const redemptions = this.pendingOrders.filter(
(o) => o.orderType === "redeem" && o.status === "pending"
);
// Process subscriptions
console.log(`\n📥 Processing ${subscriptions.length} subscriptions...`);
for (const order of subscriptions) {
try {
const result = await this.processSubscription({
fundMint,
usdcMint,
investor: order.investor,
usdcAmount: order.amount
});
order.status = "executed";
signatures.push(result.signature);
totalUSDCSubscribed += result.usdcAmount;
totalSharesMinted += result.sharesIssued;
subscriptionsProcessed++;
} catch (error) {
console.error(` ❌ Order ${order.orderId} failed:`, error);
order.status = "failed";
}
}
// Process redemptions
console.log(`\n📤 Processing ${redemptions.length} redemptions...`);
for (const order of redemptions) {
try {
const result = await this.processRedemption({
fundMint,
usdcMint,
investor: order.investor,
shareAmount: order.amount
});
order.status = "executed";
signatures.push(result.signature);
totalSharesRedeemed += result.sharesRedeemed;
totalUSDCPaid += result.usdcPaid;
redemptionsProcessed++;
} catch (error) {
console.error(` ❌ Order ${order.orderId} failed:`, error);
order.status = "failed";
}
}
// Clear executed orders
this.pendingOrders = this.pendingOrders.filter(
(o) => o.status === "pending"
);
// Print summary
console.log(
"\n════════════════════════════════════════════════════════════════"
);
console.log(
" STRIKE SUMMARY "
);
console.log(
"════════════════════════════════════════════════════════════════"
);
console.log(` Subscriptions: ${subscriptionsProcessed} processed`);
console.log(` Total USDC In: $${totalUSDCSubscribed.toLocaleString()}`);
console.log(` Shares Minted: ${totalSharesMinted.toFixed(2)}`);
console.log(` Redemptions: ${redemptionsProcessed} processed`);
console.log(` Shares Burned: ${totalSharesRedeemed.toFixed(2)}`);
console.log(` Total USDC Out: $${totalUSDCPaid.toLocaleString()}`);
console.log(` New AUM: $${this.totalAUM.toLocaleString()}`);
console.log(
` Shares Outstanding: ${this.totalSharesOutstanding.toFixed(2)}`
);
console.log(
"════════════════════════════════════════════════════════════════\n"
);
return {
strikeId,
strikeTime,
nav: this.currentNAV,
subscriptionsProcessed,
totalUSDCSubscribed,
totalSharesMinted,
redemptionsProcessed,
totalSharesRedeemed,
totalUSDCPaid,
signatures
};
}
/**
* Get current fund state
*/
getFundState(fundMint: Address): FundState {
return {
fundMint,
currentNAV: this.currentNAV,
lastStrikeTime: this.lastStrikeTime,
totalAUM: this.totalAUM,
totalSharesOutstanding: this.totalSharesOutstanding
};
}
/**
* Get current NAV
*/
getCurrentNAV(): number {
return this.currentNAV;
}
/**
* Get pending orders
*/
getPendingOrders(): StrikeOrder[] {
return [...this.pendingOrders];
}
/**
* Calculate next strike time based on schedule
*/
getNextStrikeTime(): Date {
const now = new Date();
const currentTime = `${now.getHours().toString().padStart(2, "0")}:${now
.getMinutes()
.toString()
.padStart(2, "0")}`;
for (const strikeTime of this.strikeSchedule) {
if (strikeTime > currentTime) {
const [hours, minutes] = strikeTime.split(":");
const strikeDate = new Date(now);
strikeDate.setHours(parseInt(hours), parseInt(minutes), 0, 0);
return strikeDate;
}
}
// Next strike is tomorrow's first strike
const tomorrow = new Date(now);
tomorrow.setDate(tomorrow.getDate() + 1);
const [hours, minutes] = this.strikeSchedule[0].split(":");
tomorrow.setHours(parseInt(hours), parseInt(minutes), 0, 0);
return tomorrow;
}
/**
* Airdrops SOL for testing
*/
async airdropSol(publicKey: Address, amount: number): Promise<void> {
console.log(
`\n💰 Airdropping ${amount} SOL to ${publicKey.slice(0, 20)}...`
);
const airdrop = airdropFactory({
rpc: this.client.rpc,
rpcSubscriptions: this.client.rpcSubscriptions
});
await airdrop({
recipientAddress: publicKey,
lamports: lamports(BigInt(amount * 1_000_000_000)),
commitment: "confirmed"
});
console.log(`✅ Airdrop complete`);
}
}

Kompletny przykład użycia

Oto kompletny przykład ilustrujący pełny dzień operacji uderzeń NAV:

/**
* NAV Strikes Demo - Solana Kit Version
*
* Demonstrates multiple daily NAV strikes for a money market fund on Solana.
* Built with @solana/kit (web3.js 2.0)
*
* Run with: npm run demo:kit
* Requires: solana-test-validator running locally
*
* ⚠️ EDUCATIONAL REFERENCE ONLY - NOT FOR PRODUCTION USE
*/
import {
airdropFactory,
generateKeyPairSigner,
lamports,
KeyPairSigner,
Address
} from "@solana/kit";
import {
NAVStrikeEngine,
createSolanaClient,
getExplorerLink
} from "../nav-strike-engine";
import {
createTestUSDC,
mintTestUSDC,
getUSDCBalance,
getFundShareBalance
} from "../test-usdc";
import type { SolanaClient } from "../types";
/**
* Helper to print section headers
*/
function printHeader(title: string): void {
console.log("\n");
console.log(
"╔══════════════════════════════════════════════════════════════╗"
);
console.log(`║ ${title.padEnd(60)}║`);
console.log(
"╚══════════════════════════════════════════════════════════════╝"
);
}
/**
* Print final balances for all participants
*/
async function printBalances(
client: SolanaClient,
fundMint: Address,
usdcMint: Address,
participants: { name: string; address: Address }[]
): Promise<void> {
console.log(
"\n┌─────────────────────────────────────────────────────────────────┐"
);
console.log(
"│ FINAL BALANCES │"
);
console.log(
"├─────────────────────────────────────────────────────────────────┤"
);
for (const { name, address } of participants) {
const usdcBalance = await getUSDCBalance(client, usdcMint, address);
const shareBalance = await getFundShareBalance(client, fundMint, address);
console.log(
`│ ${name.padEnd(15)} USDC: $${usdcBalance
.toFixed(2)
.padStart(10)} │ Shares: ${shareBalance.toFixed(2).padStart(10)} │`
);
}
console.log(
"└─────────────────────────────────────────────────────────────────┘"
);
// Cost comparison
console.log(
"\n┌─────────────────────────────────────────────────────────────────┐"
);
console.log(
"│ COST COMPARISON │"
);
console.log(
"├─────────────────────────────────────────────────────────────────┤"
);
console.log(
"│ Traditional Solana NAV Strikes │"
);
console.log(
"│ ───────────────────────────────────────────────────────────── │"
);
console.log(
"│ Strikes/Day: 1 (4PM) 4+ (configurable)│"
);
console.log(
"│ Settlement: T+1/T+2 Instant │"
);
console.log(
"│ Pricing: Unknown til 4PM Exact NAV at strike │"
);
console.log(
"│ Compliance: Manual KYC/AML Onchain whitelist │"
);
console.log(
"│ Settlement Risk: High None │"
);
console.log(
"│ Audit Trail: Manual Blockchain │"
);
console.log(
"└─────────────────────────────────────────────────────────────────┘"
);
}
/**
* Main demo function
*/
async function main(): Promise<void> {
console.log(`
╔══════════════════════════════════════════════════════════════════╗
║ ║
║ ███╗ ██╗ █████╗ ██╗ ██╗ ███████╗████████╗██████╗ ║
║ ████╗ ██║██╔══██╗██║ ██║ ██╔════╝╚══██╔══╝██╔══██╗ ║
║ ██╔██╗ ██║███████║██║ ██║ ███████╗ ██║ ██████╔╝ ║
║ ██║╚██╗██║██╔══██║╚██╗ ██╔╝ ╚════██║ ██║ ██╔══██╗ ║
║ ██║ ╚████║██║ ██║ ╚████╔╝ ███████║ ██║ ██║ ██║ ║
║ ╚═╝ ╚═══╝╚═╝ ╚═╝ ╚═══╝ ╚══════╝ ╚═╝ ╚═╝ ╚═╝ ║
║ ║
║ NAV STRIKES - Solana Kit Reference Implementation ║
║ Built with @solana/kit (web3.js 2.0) ║
║ ║
╚══════════════════════════════════════════════════════════════════╝
`);
// ─────────────────────────────────────────────────────────────────
// SETUP: Connect to local validator
// ─────────────────────────────────────────────────────────────────
printHeader("SETUP: Connecting to Local Validator");
const client = await createSolanaClient();
console.log("✅ Connected to local validator (http://127.0.0.1:8899)");
// Create keypairs
const fundAdmin = await generateKeyPairSigner();
const investorA = await generateKeyPairSigner();
const investorB = await generateKeyPairSigner();
console.log(`\n👤 Fund Administrator: ${fundAdmin.address}`);
console.log(`👤 Investor A: ${investorA.address}`);
console.log(`👤 Investor B: ${investorB.address}`);
// Create airdrop function
const airdrop = airdropFactory({
rpc: client.rpc,
rpcSubscriptions: client.rpcSubscriptions
});
// Fund accounts with SOL
console.log("\n💰 Airdropping SOL to accounts...");
await airdrop({
recipientAddress: fundAdmin.address,
lamports: lamports(10_000_000_000n),
commitment: "confirmed"
});
console.log(" ✅ Fund Admin: 10 SOL");
await airdrop({
recipientAddress: investorA.address,
lamports: lamports(2_000_000_000n),
commitment: "confirmed"
});
console.log(" ✅ Investor A: 2 SOL");
await airdrop({
recipientAddress: investorB.address,
lamports: lamports(2_000_000_000n),
commitment: "confirmed"
});
console.log(" ✅ Investor B: 2 SOL");
// ─────────────────────────────────────────────────────────────────
// STEP 1: Create Test USDC
// ─────────────────────────────────────────────────────────────────
printHeader("STEP 1: Creating Test USDC");
const usdcMint = await createTestUSDC(client, fundAdmin, fundAdmin);
// Mint USDC to participants
await mintTestUSDC(
client,
usdcMint,
fundAdmin,
investorA.address,
500,
"Investor A"
);
await mintTestUSDC(
client,
usdcMint,
fundAdmin,
investorB.address,
300,
"Investor B"
);
await mintTestUSDC(
client,
usdcMint,
fundAdmin,
fundAdmin.address,
1000,
"Fund Admin"
);
// ─────────────────────────────────────────────────────────────────
// STEP 2: Create NAV Strike Engine & Fund Token
// ─────────────────────────────────────────────────────────────────
printHeader("STEP 2: Creating Fund & NAV Strike Engine");
const engine = new NAVStrikeEngine(client, fundAdmin, "localnet");
const fundMint = await engine.createFundToken(fundAdmin, {
name: "Example Money Market Fund",
symbol: "EX-MMF",
uri: "Link to of chain meta data",
initialNAV: 1.0,
strikeSchedule: ["09:30", "12:00", "14:30", "16:00"],
decimals: 6
});
// ─────────────────────────────────────────────────────────────────
// STEP 3: Whitelist Investors
// ─────────────────────────────────────────────────────────────────
printHeader("STEP 3: Whitelisting Investors (KYC/AML)");
await engine.whitelistInvestor(fundMint, investorA.address, fundAdmin);
await engine.whitelistInvestor(fundMint, investorB.address, fundAdmin);
// ─────────────────────────────────────────────────────────────────
// STRIKE 1: 9:30 AM - Initial Subscriptions
// ─────────────────────────────────────────────────────────────────
printHeader("STRIKE 1: 9:30 AM - Initial Subscriptions");
// Investors delegate USDC and queue orders
await engine.delegateUSDCForSubscription(investorA, usdcMint, 250);
engine.queueOrder(investorA.address, "subscribe", 250);
await engine.delegateUSDCForSubscription(investorB, usdcMint, 150);
engine.queueOrder(investorB.address, "subscribe", 150);
// Execute strike at $1.00 NAV
await engine.executeStrike(fundMint, usdcMint, 1.0);
// ─────────────────────────────────────────────────────────────────
// STRIKE 2: 12:00 PM - Additional Subscription
// ─────────────────────────────────────────────────────────────────
printHeader("STRIKE 2: 12:00 PM - Additional Subscription");
// Investor A adds more
await engine.delegateUSDCForSubscription(investorA, usdcMint, 100);
engine.queueOrder(investorA.address, "subscribe", 100);
// Execute strike at $1.01 NAV (slight gain from interest)
await engine.executeStrike(fundMint, usdcMint, 1.01);
// ─────────────────────────────────────────────────────────────────
// STRIKE 3: 2:30 PM - Partial Redemption
// ─────────────────────────────────────────────────────────────────
printHeader("STRIKE 3: 2:30 PM - Partial Redemption");
// Investor B redeems 50 shares
await engine.delegateSharesForRedemption(investorB, fundMint, 50);
engine.queueOrder(investorB.address, "redeem", 50);
// Execute strike at $1.02 NAV
await engine.executeStrike(fundMint, usdcMint, 1.02);
// ─────────────────────────────────────────────────────────────────
// STRIKE 4: 4:00 PM - End of Day
// ─────────────────────────────────────────────────────────────────
printHeader("STRIKE 4: 4:00 PM - End of Day");
// No new orders, just NAV update
await engine.executeStrike(fundMint, usdcMint, 1.03);
// ─────────────────────────────────────────────────────────────────
// FINAL: Print Balances
// ─────────────────────────────────────────────────────────────────
printHeader("FINAL RESULTS");
await printBalances(client, fundMint, usdcMint, [
{ name: "Fund Admin", address: fundAdmin.address },
{ name: "Investor A", address: investorA.address },
{ name: "Investor B", address: investorB.address }
]);
// Print fund state
const fundState = engine.getFundState(fundMint);
console.log("\n📊 Fund State:");
console.log(` Current NAV: $${fundState.currentNAV.toFixed(6)}`);
console.log(` Total AUM: $${fundState.totalAUM.toLocaleString()}`);
console.log(
` Shares Outstanding: ${fundState.totalSharesOutstanding.toFixed(2)}`
);
console.log(` Last Strike: ${fundState.lastStrikeTime.toISOString()}`);
console.log(
"\n✅ Demo complete! NAV Strikes with Solana Kit working correctly."
);
console.log(
" View transactions on Solana Explorer (local validator - links shown above)\n"
);
}
// Run the demo
main().catch((error) => {
console.error("❌ Demo failed:", error);
process.exit(1);
});

Kwestie produkcyjne

Przed wdrożeniem na środowisko produkcyjne upewnij się, że uwzględniasz:

  1. Bezpieczeństwo: Profesjonalne zarządzanie kluczami, kontrole wielopodpisowe i kompleksowe audyty bezpieczeństwa kodu źródłowego
  2. Zgodność z przepisami: Rejestracja papierów wartościowych, systemy KYC/AML, ograniczenia transferu i wymagana sprawozdawczość
  3. Zarządzanie kluczami: Instytucjonalne rozwiązania do przechowywania z właściwymi procedurami tworzenia kopii zapasowych i odzyskiwania
  4. Przetwarzanie transakcji: Opłaty priorytetowe, logika ponownych prób, obsługa potwierdzeń i redundancja RPC
  5. Operacje funduszu: Obliczanie NAV z miarodajnych źródeł, integracja z depozytariuszem i uzgodnienia
  6. Monitorowanie: Śledzenie w czasie rzeczywistym, alerty i zautomatyzowana sprawozdawczość regulacyjna

Kolejne kroki

Po zapoznaniu się z uderzeniami NAV na Solanie:

  1. Zapoznaj się z Token Extensions: Dowiedz się o innych rozszerzeniach Token 2022, takich jak na przykład stały delegat, dla dodatkowych funkcji zgodności z przepisami

  2. Wdróż Token ACL: Aby zwiększyć zgodność z przepisami, rozważ użycie Token ACL do zarządzania whitelistą inwestorów z bezuprawnieniowym odmrażaniem. Umożliwia to samoobsługową weryfikację KYC, w której inwestorzy mogą automatycznie aktywować swoje konta po przejściu kontroli zgodności, zmniejszając koszty operacyjne przy zachowaniu kontroli regulacyjnej.

  3. Zapoznaj się z rozliczeniem DvP: Zobacz nasz przewodnik Delivery vs Payment dotyczący wzorców rozliczania papierów wartościowych

  4. Architektura produkcyjna: Zaprojektuj solidne systemy harmonogramowania, monitorowania i odtwarzania po awarii

Podsumowanie

Atomowy model transakcji Solany i Token Extensions zapewniają potężną podstawę do implementacji wielu dziennych uderzeń NAV dla funduszy rynku pieniężnego. Kombinacja:

  • Natywnej atomowej realizacji (brak ryzyka smart kontraktów)
  • Finalności poniżej jednej sekundy
  • Bliskich zeru kosztów transakcji
  • Transparentności NAV onchain
  • Wbudowanych funkcji zgodności (domyślne zamrożenie, metadane)

Sprawia, że Solana jest idealną platformą do modernizacji infrastruktury rozliczania funduszy i zapewniania inwestorom częstszych możliwości handlowych.

Jednak przejście od tej edukacyjnej implementacji referencyjnej do środowiska produkcyjnego wymaga znacznej dodatkowej pracy w zakresie bezpieczeństwa, zgodności z przepisami, przechowywania aktywów i operacji. Zawsze współpracuj z wykwalifikowanymi ekspertami prawnymi, regulacyjnymi i technicznymi przy tokenizacji funduszy.

Is this page helpful?