NAV Strikes per Fondi del Mercato Monetario su Solana

I NAV (Net Asset Value) strike sono orari fissi durante la giornata di negoziazione in cui le quote del fondo vengono prezzate e gli ordini vengono eseguiti. I fondi tradizionali hanno tipicamente un unico strike giornaliero alla chiusura del mercato, ma la velocità e i bassi costi di Solana consentono più strike infragiornalieri, offrendo agli investitori maggiore flessibilità.

Cos'è il NAV?

Un fondo è un insieme di asset posseduti collettivamente da molti investitori. Il NAV (Net Asset Value) è semplicemente il prezzo di una quota del fondo. Pensatelo in questo modo:

NAV = (Total Value of Everything in the Fund - liabilities) ÷ Number of Shares

Ad esempio, se un fondo detiene $10 milioni di asset e ha 10 milioni di quote in circolazione, ogni quota vale $1,00.

Perché il NAV è importante?

  • Acquisto di quote (sottoscrizione): Si paga il NAV corrente. Se il NAV è $1,02 e si investe $102, si ottengono 100 quote.
  • Vendita di quote (rimborso): Si riceve il NAV corrente. Se si riscattano 100 quote al NAV di $1,02, si ottengono $102.

I fondi del mercato monetario mantengono tipicamente un NAV stabile intorno a $1,00, con piccole fluttuazioni basate sugli interessi maturati.

Il Problema

Quando si investe in un fondo del mercato monetario, tradizionalmente accadono due cose in momenti diversi:

  1. Si invia un ordine → Si attende la chiusura del mercato
  2. NAV calcolato → Quote emesse/rimborsate a T+1 o T+2

Questo crea diversi problemi:

  • Esecuzione ritardata: Gli ordini inviati al mattino attendono fino alle 16:00
  • Ritardo nel regolamento: Il denaro rimane in sospeso per 1-2 giorni
  • Flessibilità limitata: Una sola opportunità al giorno per effettuare transazioni
  • Prezzi obsoleti: Il NAV può essere obsoleto tra l'ordine e l'esecuzione

La Soluzione

I NAV Strike su Solana consentono più finestre di regolamento giornaliere con esecuzione atomica. Gli ordini vengono accodati ed eseguiti istantaneamente ad ogni orario di strike con il NAV corrente.

┌─────────────────────────────────────────────────────────────┐
│ MULTIPLE DAILY NAV STRIKES │
├─────────────────────────────────────────────────────────────┤
│ │
│ 9:30 AM 12:00 PM 2:30 PM 4:00 PM │
│ │ │ │ │ │
│ ▼ ▼ ▼ ▼ │
│ ┌─────┐ ┌─────┐ ┌─────┐ ┌─────┐ │
│ │STRIKE│ │STRIKE│ │STRIKE│ │STRIKE│ │
│ │NAV=$1│ │NAV=$1│ │NAV=$1│ │NAV=$1│ │
│ │.0012 │ │.0015 │ │.0018 │ │.0020 │ │
│ └─────┘ └─────┘ └─────┘ └─────┘ │
│ │ │ │ │ │
│ ▼ ▼ ▼ ▼ │
│ Process Process Process Process │
│ Orders Orders Orders Orders │
│ │
│ ✅ Atomic settlement at each strike │
│ ✅ NAV stored onchain in token metadata │
│ ✅ Less stale prices │
│ │
└─────────────────────────────────────────────────────────────┘

Questa guida illustra come implementare i NAV strike su Solana utilizzando le estensioni SPL Token 2022 per l'emissione conforme di quote del fondo e USDC standard per il regolamento, il tutto senza scrivere programmi Rust personalizzati.

Implementazione di Riferimento Educativa

Puoi utilizzare il codice sorgente di questa implementazione per provare i NAV strike in locale.

Questa guida fornisce un'implementazione di riferimento solo a scopo esplorativo ed educativo. NON utilizzare questo codice direttamente in produzione senza:

  • Audit di sicurezza completi
  • Sistemi adeguati di gestione delle chiavi
  • Revisione della conformità normativa
  • Consulenza legale
  • Test approfonditi e modifiche

Panoramica dell'Architettura

Il sistema NAV Strike è composto dai seguenti componenti principali:

  1. Token di Quote del Fondo: SPL Token 2022 con metadati che memorizzano il NAV onchain
  2. Valuta di Regolamento: USDC standard (token SPL esistente)
  3. Amministratore del Fondo: Orchestra gli strike tramite autorità delegata
  4. Sistema di Whitelist: Controlla quali indirizzi possono detenere quote del fondo

Principi Chiave di Progettazione

  • Nessun Programma Personalizzato: Utilizza solo Token Extensions Program e USDC standard
  • Regolamento Atomico: Una singola transazione garantisce che la sottoscrizione/rimborso venga completata o fallisca insieme
  • Stato Predefinito Congelato: Le quote richiedono una whitelist esplicita per la conformità normativa
  • Autorità Delegata: L'amministratore del fondo opera senza prendere custodia
  • NAV Onchain: Il prezzo corrente è memorizzato nei metadati del token, verificabile pubblicamente

Fase 1: Configurazione del Fondo

  1. Crea il token di Quote del Fondo con estensioni di metadati
  2. Inizializza il NAV a $1,00
  3. Imposta il calendario degli strike giornalieri
  4. Inserisci in whitelist gli investitori istituzionali

Fase 2: Periodo Pre-Strike

  1. Gli investitori inviano richieste di sottoscrizione/rimborso
  2. Gli ordini vengono accodati per il prossimo orario di strike
  3. Il fondo calcola il NAV preliminare
  4. Vengono eseguiti i controlli di rischio

Fase 3: Esecuzione del NAV Strike

At Strike Time (e.g., 14:30):
├── Calculate final NAV from underlying assets
├── Update onchain NAV in metadata
├── Process all pending subscriptions atomically
│ └── USDC → Fund Shares at exact NAV
├── Process all pending redemptions atomically
│ └── Fund Shares → USDC at exact NAV
└── Emit strike completion event
✅ STRIKE COMPLETE (all trades at same NAV)

Fase 4: Post-Strike

  1. Genera le conferme di negoziazione
  2. Aggiorna la composizione del fondo
  3. Prepara il prossimo strike
  4. Riconcilia con il depositario

Schema di Autorità Delegata

Gli investitori pre-autorizzano l'amministratore del fondo a spostare i loro token, quindi l'amministratore esegue all'orario di strike senza necessità delle firme degli investitori:

┌──────────┐ delegates ┌────────────────────┐ delegates ┌──────────┐
│ Investor │ ───────────────→ │ Fund Administrator │ ←────────────── │ Investor │
│ A │ (USDC) │ (trusted) │ (shares) │ B │
└──────────┘ │ │ └──────────┘
│ executes strike │
│ (atomic txns) │
└────────────────────┘

Flusso di Sottoscrizione (USDC → Quote del Fondo)

Investor wants to invest $100,000 USDC
Current NAV = $1.000234 per share
────────────────────────────────────
1. Investor approves $100,000 USDC delegation
2. At strike time, atomic transaction:
├── Transfer $100,000 USDC from investor
├── Calculate shares: 100,000 / 1.000234 = 99,976.61
└── Mint 99,976.61 fund shares to investor
3. Settlement complete in <1 second

Flusso di Rimborso (Quote del Fondo → USDC)

Investor wants to redeem 50,000 shares
Current NAV = $1.000234 per share
────────────────────────────────────
1. Investor approves 50,000 shares delegation
2. At strike time, atomic transaction:
├── Burn 50,000 fund shares from investor
├── Calculate USDC: 50,000 × 1.000234 = $50,011.70
└── Transfer $50,011.70 USDC to investor
3. Settlement complete in <1 second

Perché Solana per i NAV Strike?

L'architettura di Solana offre vantaggi significativi rispetto al regolamento tradizionale dei fondi:

AspettoTradizionale (T+1)NAV Strike su Solana
Logica di RegolamentoAgenti di trasferimentoRaggruppamento atomico delle transazioni
Tempo di Regolamento1-2 giorni<1 secondo
Costo della Transazione$50-200<$0,01
Strike al Giorno14+ (configurabile)
Rischio prezzi obsoletiAltoInferiore
Trasparenza NAVReport a fine giornataOnchain, in tempo reale

Le transazioni atomiche di Solana eliminano gli intermediari garantendo regolamenti istantanei, economici e sicuri con trasparenza NAV onchain.

Token del Fondo con Token Extensions

SPL Token 2022 fornisce potenti estensioni che consentono l'emissione conforme di quote del fondo senza programmi personalizzati:

Estensioni Essenziali per le Quote del Fondo

  1. Estensione Default Account State: Imposta tutti i nuovi token account su congelato per impostazione predefinita, richiedendo una whitelist esplicita (conformità KYC/AML)
  2. Estensione Metadati: Memorizza il NAV, il calendario degli strike e l'AUM onchain per la trasparenza

Configurazione delle Autorità

  • Mint Authority: Amministratore del Fondo (controlla l'emissione delle quote)
  • Freeze Authority: Amministratore del Fondo (gestisce la whitelist)
  • Update Authority: Amministratore del Fondo (aggiorna i metadati NAV)

Lo stato congelato predefinito è fondamentale per la conformità normativa. Garantisce che solo gli indirizzi esplicitamente inseriti in whitelist (verificati tramite KYC) possano ricevere e detenere quote del fondo.

Campi dei Metadati Onchain

{
"name": "Example Money Market Fund",
"symbol": "EX-MMF",
"currentNAV": "1.000234",
"lastStrikeTime": "2024-01-15T14:30:00Z",
"strikeSchedule": "[\"09:30\", \"12:00\", \"14:30\", \"16:00\"]",
"totalAUM": "50000000.00",
"fundType": "Money Market Fund"
}

Implementazione Completa dei NAV Strike

Configurazione del NAV Strike Engine

Si noti che in questa guida utilizziamo la libreria @solana/kit per creare il NAV Strike Engine. È possibile trovare anche un'implementazione con web3.js nel codice sorgente. Per prima cosa, creare la classe del motore principale che gestisce tutte le operazioni del fondo:

/**
* NAV Strikes Engine - Solana Kit Reference Implementation
*
* This implementation demonstrates NAV strikes for money market funds on Solana using:
* - SPL Token 2022 with Default Account State extension for fund shares
* - Standard USDC for settlement
* - Atomic transactions for subscription/redemption
* - Delegated authority pattern for fund administrator
*
* Built with @solana/kit (web3.js 2.0)
*
* ⚠️ IMPORTANT: This is a reference implementation for educational purposes.
* Do NOT use in production without proper audits and security reviews.
*/
import {
Address,
airdropFactory,
appendTransactionMessageInstructions,
createSolanaRpc,
createSolanaRpcSubscriptions,
createTransactionMessage,
generateKeyPairSigner,
getSignatureFromTransaction,
KeyPairSigner,
lamports,
pipe,
sendAndConfirmTransactionFactory,
setTransactionMessageFeePayerSigner,
setTransactionMessageLifetimeUsingBlockhash,
signTransactionMessageWithSigners,
Rpc,
RpcSubscriptions,
SolanaRpcApi,
SolanaRpcSubscriptionsApi
} from "@solana/kit";
import { getCreateAccountInstruction } from "@solana-program/system";
import {
TOKEN_PROGRAM_ADDRESS,
getApproveInstruction,
getTransferCheckedInstruction,
getMintToInstruction,
getBurnInstruction,
findAssociatedTokenPda,
getCreateAssociatedTokenInstruction
} from "@solana-program/token";
import {
TOKEN_2022_PROGRAM_ADDRESS,
getInitializeMintInstruction,
getInitializeTokenMetadataInstruction,
getUpdateTokenMetadataFieldInstruction,
tokenMetadataField,
getThawAccountInstruction,
getFreezeAccountInstruction,
AccountState,
getMintSize,
extension,
getPreInitializeInstructionsForMintExtensions,
fetchMaybeToken
} from "@solana-program/token-2022";
import { pack } from "@solana/spl-token-metadata";
import { PublicKey } from "@solana/web3.js";
// TLV (Type-Length-Value) sizes for Token-2022 extensions
const TYPE_SIZE = 2;
const LENGTH_SIZE = 2;
import type {
FundTokenConfig,
FundState,
SubscriptionParams,
RedemptionParams,
SubscriptionResult,
RedemptionResult,
StrikeResult,
StrikeOrder,
SolanaClient
} from "./types";
/**
* Cluster type for explorer links
*/
export type ClusterType = "mainnet-beta" | "devnet" | "testnet" | "localnet";
/**
* Generate Solana Explorer link for a transaction
*/
export function getExplorerLink(
signature: string,
cluster: ClusterType = "localnet"
): string {
const baseUrl = "https://explorer.solana.com/tx";
if (cluster === "localnet") {
return `${baseUrl}/${signature}?cluster=custom&customUrl=http%3A%2F%2Flocalhost%3A8899`;
}
return `${baseUrl}/${signature}?cluster=${cluster}`;
}
/**
* Generate Solana Explorer link for an account/address
*/
export function getAddressExplorerLink(
addr: string,
cluster: ClusterType = "localnet"
): string {
const baseUrl = "https://explorer.solana.com/address";
if (cluster === "localnet") {
return `${baseUrl}/${addr}?cluster=custom&customUrl=http%3A%2F%2Flocalhost%3A8899`;
}
return `${baseUrl}/${addr}?cluster=${cluster}`;
}
/**
* Create a Solana client for Kit
*/
export async function createSolanaClient(
rpcUrl: string = "http://127.0.0.1:8899",
wsUrl: string = "ws://127.0.0.1:8900"
): Promise<SolanaClient> {
const rpc = createSolanaRpc(rpcUrl);
const rpcSubscriptions = createSolanaRpcSubscriptions(wsUrl);
const sendAndConfirmTransaction = sendAndConfirmTransactionFactory({
rpc,
rpcSubscriptions
});
return {
rpc,
rpcSubscriptions,
sendAndConfirmTransaction
};
}
/**
* NAV Strike Engine - Solana Kit Version
*
* Manages the lifecycle of a money market fund on Solana:
* - Creates fund tokens with Token 2022 extensions
* - Updates NAV at scheduled strike times
* - Processes subscription and redemption orders atomically
*/
export class NAVStrikeEngine {
private client: SolanaClient;
private fundAdministrator: KeyPairSigner;
private cluster: ClusterType;
// Fund state
private currentNAV: number = 1.0;
private totalAUM: number = 0;
private totalSharesOutstanding: number = 0;
private strikeSchedule: string[] = [];
private lastStrikeTime: Date = new Date();
// Order queue
private pendingOrders: StrikeOrder[] = [];
private orderCounter: number = 0;
constructor(
client: SolanaClient,
fundAdministrator: KeyPairSigner,
cluster: ClusterType = "localnet"
) {
this.client = client;
this.fundAdministrator = fundAdministrator;
this.cluster = cluster;
}
/**
* Helper to send and confirm transactions with correct typing
* Works around stricter types in @solana/kit v5+
*/
// eslint-disable-next-line @typescript-eslint/no-explicit-any
private async sendTransaction(
signedTx: any,
commitment: "confirmed" | "finalized" = "confirmed"
): Promise<void> {
await this.client.sendAndConfirmTransaction(signedTx, { commitment });
}
/**
* Get explorer link for a transaction signature
*/
getTxExplorerLink(signature: string): string {
return getExplorerLink(signature, this.cluster);
}
/**
* Get explorer link for an address
*/
getAddressLink(addr: string): string {
return getAddressExplorerLink(addr, this.cluster);
}
/**
* Creates a fund share token using Token-2022 with Default Account State and Metadata extensions
* Fund shares are frozen by default and require whitelisting
* Metadata stores NAV and fund information onchain
*/
async createFundToken(
issuer: KeyPairSigner,
config: FundTokenConfig
): Promise<Address> {
console.log(
"\n╔══════════════════════════════════════════════════════════════╗"
);
console.log(
"║ NAV STRIKE - FUND CREATION (Kit) ║"
);
console.log(
"╚══════════════════════════════════════════════════════════════╝"
);
console.log(`\n🏗️ Creating fund token with Token-2022 + Metadata...`);
console.log(` Name: ${config.name}`);
console.log(` Symbol: ${config.symbol}`);
console.log(` Initial NAV: $${config.initialNAV.toFixed(6)}`);
console.log(` Strike Schedule: ${config.strikeSchedule.join(", ")}`);
// Generate new keypair for the mint
const mint = await generateKeyPairSigner();
const decimals = config.decimals ?? 6;
// Define extensions
const defaultAccountStateExtension = extension("DefaultAccountState", {
state: AccountState.Frozen
});
const metadataPointerExtension = extension("MetadataPointer", {
authority: this.fundAdministrator.address,
metadataAddress: mint.address
});
const extensions = [defaultAccountStateExtension, metadataPointerExtension];
// Calculate mint size without metadata
const baseMintSize = getMintSize(extensions);
// Create metadata object to calculate EXACT size using pack()
// Note: PublicKey is only used here for size calculation, not for transaction building
const metadataForSizing = {
mint: new PublicKey(mint.address),
name: config.name,
symbol: config.symbol,
uri: config.uri || "",
additionalMetadata: [
["icon-uri", "link to icon"], // Max NAV format
["currentNAV", "999999.999999"], // Max NAV format
["lastStrikeTime", "2099-12-31T23:59:59.999Z"], // Max ISO timestamp
["strikeSchedule", JSON.stringify(config.strikeSchedule)],
["totalAUM", "999999999999999.99"], // Max AUM (quadrillions)
["fundType", "Money Market Fund"]
] as [string, string][]
};
// Calculate exact metadata size using pack()
const metadataLen = pack(metadataForSizing).length;
// MetadataExtension TLV overhead: 2 bytes for type, 2 bytes for length
const metadataExtensionOverhead = TYPE_SIZE + LENGTH_SIZE;
// Add safety buffer for any encoding overhead
const totalSpace =
baseMintSize + metadataLen + metadataExtensionOverhead + 100;
// Get rent for total space
const mintRent = await this.client.rpc
.getMinimumBalanceForRentExemption(BigInt(totalSpace))
.send();
// Build create account instruction (with base size, but extra rent for metadata)
const createAccountIx = getCreateAccountInstruction({
payer: issuer,
newAccount: mint,
lamports: lamports(mintRent),
space: baseMintSize,
programAddress: TOKEN_2022_PROGRAM_ADDRESS
});
// Get extension initialization instructions
const preInitIxs = getPreInitializeInstructionsForMintExtensions(
mint.address,
extensions
);
// Initialize mint instruction (Token 2022)
const initMintIx = getInitializeMintInstruction({
mint: mint.address,
decimals,
mintAuthority: this.fundAdministrator.address,
freezeAuthority: this.fundAdministrator.address
});
// Initialize metadata instruction
const initMetadataIx = getInitializeTokenMetadataInstruction({
metadata: mint.address,
updateAuthority: this.fundAdministrator.address,
mint: mint.address,
mintAuthority: this.fundAdministrator,
name: config.name,
symbol: config.symbol,
uri: ""
});
// Build custom metadata field update instructions
const initialMetadata: [string, string][] = [
["currentNAV", config.initialNAV.toFixed(6)],
["lastStrikeTime", new Date().toISOString()],
["strikeSchedule", JSON.stringify(config.strikeSchedule)],
["totalAUM", "0.00"],
["fundType", "Money Market Fund"]
];
const updateFieldIxs = initialMetadata.map(([key, value]) =>
getUpdateTokenMetadataFieldInstruction({
metadata: mint.address,
updateAuthority: this.fundAdministrator,
field: tokenMetadataField("Key", [key]),
value
})
);
// Get latest blockhash
const { value: latestBlockhash } = await this.client.rpc
.getLatestBlockhash()
.send();
// Build transaction message
const transactionMessage = pipe(
createTransactionMessage({ version: 0 }),
(tx) => setTransactionMessageFeePayerSigner(issuer, tx),
(tx) => setTransactionMessageLifetimeUsingBlockhash(latestBlockhash, tx),
(tx) =>
appendTransactionMessageInstructions(
[
createAccountIx,
...preInitIxs,
initMintIx,
initMetadataIx,
...updateFieldIxs
],
tx
)
);
// Sign and send
const signedTransaction =
await signTransactionMessageWithSigners(transactionMessage);
const signature = getSignatureFromTransaction(signedTransaction);
await this.sendTransaction(signedTransaction);
// Update internal state
this.currentNAV = config.initialNAV;
this.strikeSchedule = config.strikeSchedule;
this.lastStrikeTime = new Date();
console.log(`\n✅ Fund token created: ${mint.address}`);
console.log(` Mint Authority: ${this.fundAdministrator.address}`);
console.log(` Freeze Authority: ${this.fundAdministrator.address}`);
console.log(` Default State: FROZEN (requires whitelisting)`);
console.log(` ✨ Metadata: ON-CHAIN`);
console.log(` - NAV: $${config.initialNAV.toFixed(6)}`);
console.log(` - Schedule: ${config.strikeSchedule.join(", ")}`);
console.log(` 🔗 Token: ${this.getAddressLink(mint.address)}`);
console.log(` 🔗 Tx: ${this.getTxExplorerLink(signature)}`);
return mint.address;
}

Aggiornamenti Dinamici dei Metadati

Per le quote del fondo, i campi currentNAV, lastStrikeTime e totalAUM vengono aggiornati onchain ad ogni NAV strike utilizzando getUpdateTokenMetadataFieldInstruction. Questo fornisce:

  • Visibilità NAV in tempo reale per tutti i partecipanti
  • Audit trail di tutti gli aggiornamenti NAV onchain
  • Integrazione con i protocolli DeFi in grado di leggere i metadati onchain
/**
* Updates NAV onchain in token metadata
*/
async updateNAV(fundMint: Address, newNAV: number): Promise<string> {
const previousNAV = this.currentNAV;
this.currentNAV = newNAV;
this.lastStrikeTime = new Date();
// Build update field instructions
const updateNavIx = getUpdateTokenMetadataFieldInstruction({
metadata: fundMint,
updateAuthority: this.fundAdministrator,
field: tokenMetadataField("Key", ["currentNAV"]),
value: newNAV.toFixed(6)
});
const updateTimeIx = getUpdateTokenMetadataFieldInstruction({
metadata: fundMint,
updateAuthority: this.fundAdministrator,
field: tokenMetadataField("Key", ["lastStrikeTime"]),
value: this.lastStrikeTime.toISOString()
});
const updateAumIx = getUpdateTokenMetadataFieldInstruction({
metadata: fundMint,
updateAuthority: this.fundAdministrator,
field: tokenMetadataField("Key", ["totalAUM"]),
value: this.totalAUM.toFixed(2)
});
const { value: latestBlockhash } = await this.client.rpc
.getLatestBlockhash()
.send();
const transactionMessage = pipe(
createTransactionMessage({ version: 0 }),
(tx) => setTransactionMessageFeePayerSigner(this.fundAdministrator, tx),
(tx) => setTransactionMessageLifetimeUsingBlockhash(latestBlockhash, tx),
(tx) =>
appendTransactionMessageInstructions(
[updateNavIx, updateTimeIx, updateAumIx],
tx
)
);
const signedTransaction =
await signTransactionMessageWithSigners(transactionMessage);
const signature = getSignatureFromTransaction(signedTransaction);
await this.sendTransaction(signedTransaction);
const navChange = ((newNAV - previousNAV) / previousNAV) * 100;
const changeSymbol = navChange >= 0 ? "▲" : "▼";
console.log(
` NAV Updated: $${previousNAV.toFixed(6)} → $${newNAV.toFixed(
6
)} (${changeSymbol}${Math.abs(navChange).toFixed(4)}%)`
);
console.log(` 🔗 Explorer: ${this.getTxExplorerLink(signature)}`);
return signature;
}
/**
* Whitelists an investor by creating their fund account and thawing it
*/
async whitelistInvestor(
fundMint: Address,
investor: Address,
payer: KeyPairSigner
): Promise<Address> {
console.log(`\n🔓 Whitelisting investor: ${investor.slice(0, 20)}...`);
// Find the ATA
const [ata] = await findAssociatedTokenPda({
mint: fundMint,
owner: investor,
tokenProgram: TOKEN_2022_PROGRAM_ADDRESS
});
const maybeToken = await fetchMaybeToken(this.client.rpc, ata, {
commitment: "confirmed"
});
const { value: latestBlockhash } = await this.client.rpc
.getLatestBlockhash()
.send();
if (!maybeToken.exists) {
// Create ATA
const createAtaIx = getCreateAssociatedTokenInstruction({
payer,
owner: investor,
mint: fundMint,
ata,
tokenProgram: TOKEN_2022_PROGRAM_ADDRESS
});
const createAtaMsg = pipe(
createTransactionMessage({ version: 0 }),
(tx) => setTransactionMessageFeePayerSigner(payer, tx),
(tx) =>
setTransactionMessageLifetimeUsingBlockhash(latestBlockhash, tx),
(tx) => appendTransactionMessageInstructions([createAtaIx], tx)
);
const signedCreateAta =
await signTransactionMessageWithSigners(createAtaMsg);
await this.sendTransaction(signedCreateAta);
}
// Thaw the account
const thawIx = getThawAccountInstruction({
account: ata,
mint: fundMint,
owner: this.fundAdministrator
});
const thawMsg = pipe(
createTransactionMessage({ version: 0 }),
(tx) => setTransactionMessageFeePayerSigner(payer, tx),
(tx) => setTransactionMessageLifetimeUsingBlockhash(latestBlockhash, tx),
(tx) => appendTransactionMessageInstructions([thawIx], tx)
);
const signedThaw = await signTransactionMessageWithSigners(thawMsg);
await this.sendTransaction(signedThaw);
console.log(` Account: ${ata}`);
console.log(`✅ Investor whitelisted and account thawed`);
return ata;
}
/**
* Removes an investor from whitelist by freezing their account
*/
async removeFromWhitelist(
fundMint: Address,
investorFundAccount: Address,
payer: KeyPairSigner
): Promise<void> {
console.log(`\n🔒 Removing from whitelist: ${investorFundAccount}`);
const { value: latestBlockhash } = await this.client.rpc
.getLatestBlockhash()
.send();
const freezeIx = getFreezeAccountInstruction({
account: investorFundAccount,
mint: fundMint,
owner: this.fundAdministrator
});
const freezeMsg = pipe(
createTransactionMessage({ version: 0 }),
(tx) => setTransactionMessageFeePayerSigner(payer, tx),
(tx) => setTransactionMessageLifetimeUsingBlockhash(latestBlockhash, tx),
(tx) => appendTransactionMessageInstructions([freezeIx], tx)
);
const signedFreeze = await signTransactionMessageWithSigners(freezeMsg);
await this.sendTransaction(signedFreeze);
console.log(`✅ Account frozen and removed from whitelist`);
}
/**
* Delegates USDC authority to fund administrator for subscription
*/
async delegateUSDCForSubscription(
investor: KeyPairSigner,
usdcMint: Address,
amount: number
): Promise<void> {
const [investorUSDC] = await findAssociatedTokenPda({
mint: usdcMint,
owner: investor.address,
tokenProgram: TOKEN_PROGRAM_ADDRESS
});
console.log(`\n🤝 Delegating USDC for subscription...`);
console.log(` Amount: $${amount.toLocaleString()}`);
const { value: latestBlockhash } = await this.client.rpc
.getLatestBlockhash()
.send();
const approveIx = getApproveInstruction({
source: investorUSDC,
delegate: this.fundAdministrator.address,
owner: investor,
amount: BigInt(amount * 1e6)
});
const approveMsg = pipe(
createTransactionMessage({ version: 0 }),
(tx) => setTransactionMessageFeePayerSigner(investor, tx),
(tx) => setTransactionMessageLifetimeUsingBlockhash(latestBlockhash, tx),
(tx) => appendTransactionMessageInstructions([approveIx], tx)
);
const signedApprove = await signTransactionMessageWithSigners(approveMsg);
await this.sendTransaction(signedApprove);
console.log(`✅ USDC delegation approved`);
}
/**
* Delegates fund shares authority to administrator for redemption
*/
async delegateSharesForRedemption(
investor: KeyPairSigner,
fundMint: Address,
shareAmount: number
): Promise<void> {
const [investorShares] = await findAssociatedTokenPda({
mint: fundMint,
owner: investor.address,
tokenProgram: TOKEN_2022_PROGRAM_ADDRESS
});
console.log(`\n🤝 Delegating shares for redemption...`);
console.log(` Shares: ${shareAmount.toLocaleString()}`);
const { value: latestBlockhash } = await this.client.rpc
.getLatestBlockhash()
.send();
const approveIx = getApproveInstruction(
{
source: investorShares,
delegate: this.fundAdministrator.address,
owner: investor,
amount: BigInt(Math.floor(shareAmount * 1e6))
},
{ programAddress: TOKEN_2022_PROGRAM_ADDRESS }
);
const approveMsg = pipe(
createTransactionMessage({ version: 0 }),
(tx) => setTransactionMessageFeePayerSigner(investor, tx),
(tx) => setTransactionMessageLifetimeUsingBlockhash(latestBlockhash, tx),
(tx) => appendTransactionMessageInstructions([approveIx], tx)
);
const signedApprove = await signTransactionMessageWithSigners(approveMsg);
await this.sendTransaction(signedApprove);
console.log(`✅ Share delegation approved`);
}
/**
* Executes atomic subscription: USDC → Fund Shares at current NAV
*/
async processSubscription(
params: SubscriptionParams
): Promise<SubscriptionResult> {
const { fundMint, usdcMint, investor, usdcAmount } = params;
// Calculate shares at current NAV
const sharesToMint = usdcAmount / this.currentNAV;
const shortAddr = `${investor.slice(0, 4)}...${investor.slice(-4)}`;
console.log(`\n⚡ Processing subscription...`);
console.log(` Investor: ${shortAddr}`);
console.log(` USDC Amount: $${usdcAmount.toLocaleString()}`);
console.log(` NAV: $${this.currentNAV.toFixed(6)}`);
console.log(` Shares to mint: ${sharesToMint.toFixed(6)}`);
// Get token accounts
const [investorUSDC] = await findAssociatedTokenPda({
mint: usdcMint,
owner: investor,
tokenProgram: TOKEN_PROGRAM_ADDRESS
});
const [fundUSDC] = await findAssociatedTokenPda({
mint: usdcMint,
owner: this.fundAdministrator.address,
tokenProgram: TOKEN_PROGRAM_ADDRESS
});
const [investorShares] = await findAssociatedTokenPda({
mint: fundMint,
owner: investor,
tokenProgram: TOKEN_2022_PROGRAM_ADDRESS
});
const { value: latestBlockhash } = await this.client.rpc
.getLatestBlockhash()
.send();
// Build atomic transaction with both instructions
// 1. Transfer USDC from investor to fund (using delegated authority)
const transferUSDCIx = getTransferCheckedInstruction({
source: investorUSDC,
mint: usdcMint,
destination: fundUSDC,
authority: this.fundAdministrator,
amount: BigInt(Math.floor(usdcAmount * 1e6)),
decimals: 6
});
// 2. Mint fund shares to investor
const mintSharesIx = getMintToInstruction(
{
mint: fundMint,
token: investorShares,
mintAuthority: this.fundAdministrator,
amount: BigInt(Math.floor(sharesToMint * 1e6))
},
{ programAddress: TOKEN_2022_PROGRAM_ADDRESS }
);
const txMessage = pipe(
createTransactionMessage({ version: 0 }),
(tx) => setTransactionMessageFeePayerSigner(this.fundAdministrator, tx),
(tx) => setTransactionMessageLifetimeUsingBlockhash(latestBlockhash, tx),
(tx) =>
appendTransactionMessageInstructions([transferUSDCIx, mintSharesIx], tx) // <- Both happen at the same time
);
const signedTx = await signTransactionMessageWithSigners(txMessage);
const signature = getSignatureFromTransaction(signedTx);
await this.sendTransaction(signedTx);
// Update fund state
this.totalAUM += usdcAmount;
this.totalSharesOutstanding += sharesToMint;
console.log(`✅ SUBSCRIPTION SETTLED ATOMICALLY`);
console.log(` Shares issued: ${sharesToMint.toFixed(6)}`);
console.log(` New AUM: $${this.totalAUM.toLocaleString()}`);
console.log(` 🔗 Explorer: ${this.getTxExplorerLink(signature)}`);
return {
signature,
usdcAmount,
sharesIssued: sharesToMint,
executionNAV: this.currentNAV,
timestamp: new Date()
};
}
/**
* Executes atomic redemption: Fund Shares → USDC at current NAV
*/
async processRedemption(params: RedemptionParams): Promise<RedemptionResult> {
const { fundMint, usdcMint, investor, shareAmount } = params;
// Calculate USDC at current NAV
const usdcToPay = shareAmount * this.currentNAV;
const shortAddr = `${investor.slice(0, 4)}...${investor.slice(-4)}`;
console.log(`\n⚡ Processing redemption...`);
console.log(` Investor: ${shortAddr}`);
console.log(` Shares to redeem: ${shareAmount.toLocaleString()}`);
console.log(` NAV: $${this.currentNAV.toFixed(6)}`);
console.log(` USDC to pay: $${usdcToPay.toFixed(2)}`);
// Get token accounts
const [investorShares] = await findAssociatedTokenPda({
mint: fundMint,
owner: investor,
tokenProgram: TOKEN_2022_PROGRAM_ADDRESS
});
const [investorUSDC] = await findAssociatedTokenPda({
mint: usdcMint,
owner: investor,
tokenProgram: TOKEN_PROGRAM_ADDRESS
});
const [fundUSDC] = await findAssociatedTokenPda({
mint: usdcMint,
owner: this.fundAdministrator.address,
tokenProgram: TOKEN_PROGRAM_ADDRESS
});
const { value: latestBlockhash } = await this.client.rpc
.getLatestBlockhash()
.send();
// Build atomic transaction with both instructions
// 1. Burn fund shares from investor (using delegated authority)
const burnSharesIx = getBurnInstruction(
{
account: investorShares,
mint: fundMint,
authority: this.fundAdministrator,
amount: BigInt(Math.floor(shareAmount * 1e6))
},
{ programAddress: TOKEN_2022_PROGRAM_ADDRESS }
);
// 2. Transfer USDC from fund to investor
const transferUSDCIx = getTransferCheckedInstruction({
source: fundUSDC,
mint: usdcMint,
destination: investorUSDC,
authority: this.fundAdministrator,
amount: BigInt(Math.floor(usdcToPay * 1e6)),
decimals: 6
});
const txMessage = pipe(
createTransactionMessage({ version: 0 }),
(tx) => setTransactionMessageFeePayerSigner(this.fundAdministrator, tx),
(tx) => setTransactionMessageLifetimeUsingBlockhash(latestBlockhash, tx),
(tx) =>
appendTransactionMessageInstructions([burnSharesIx, transferUSDCIx], tx)
);
const signedTx = await signTransactionMessageWithSigners(txMessage);
const signature = getSignatureFromTransaction(signedTx);
await this.sendTransaction(signedTx);
// Update fund state
this.totalAUM -= usdcToPay;
this.totalSharesOutstanding -= shareAmount;
console.log(`✅ REDEMPTION SETTLED ATOMICALLY`);
console.log(` USDC paid: $${usdcToPay.toFixed(2)}`);
console.log(` New AUM: $${this.totalAUM.toLocaleString()}`);
console.log(` 🔗 Explorer: ${this.getTxExplorerLink(signature)}`);
return {
signature,
sharesRedeemed: shareAmount,
usdcPaid: usdcToPay,
executionNAV: this.currentNAV,
timestamp: new Date()
};
}
/**
* Queue an order for the next NAV strike
*/
queueOrder(
investor: Address,
orderType: "subscribe" | "redeem",
amount: number
): StrikeOrder {
const order: StrikeOrder = {
orderId: `ORD-${++this.orderCounter}`,
investor,
orderType,
amount,
strikeTime: this.getNextStrikeTime(),
status: "pending"
};
this.pendingOrders.push(order);
const shortAddr = `${investor.slice(0, 4)}...${investor.slice(-4)}`;
console.log(`\n📝 Order queued: ${order.orderId}`);
console.log(` Investor: ${shortAddr}`);
console.log(` Type: ${orderType}`);
console.log(
` Amount: ${
orderType === "subscribe"
? `$${amount.toLocaleString()} USDC`
: `${amount.toLocaleString()} shares`
}`
);
return order;
}
/**
* Execute NAV strike - update NAV and process all pending orders
*/
async executeStrike(
fundMint: Address,
usdcMint: Address,
newNAV: number
): Promise<StrikeResult> {
const strikeId = `STRIKE-${Date.now()}`;
const strikeTime = new Date();
console.log(
"\n╔══════════════════════════════════════════════════════════════╗"
);
console.log(
"║ NAV STRIKE EXECUTION ║"
);
console.log(
"╚══════════════════════════════════════════════════════════════╝"
);
console.log(` Strike ID: ${strikeId}`);
console.log(` Strike Time: ${strikeTime.toISOString()}`);
console.log(` New NAV: $${newNAV.toFixed(6)}`);
console.log(` Pending Orders: ${this.pendingOrders.length}`);
console.log(
"────────────────────────────────────────────────────────────────"
);
// 1. Update NAV
await this.updateNAV(fundMint, newNAV);
// 2. Process pending orders
const signatures: string[] = [];
let totalUSDCSubscribed = 0;
let totalSharesMinted = 0;
let totalSharesRedeemed = 0;
let totalUSDCPaid = 0;
let subscriptionsProcessed = 0;
let redemptionsProcessed = 0;
const subscriptions = this.pendingOrders.filter(
(o) => o.orderType === "subscribe" && o.status === "pending"
);
const redemptions = this.pendingOrders.filter(
(o) => o.orderType === "redeem" && o.status === "pending"
);
// Process subscriptions
console.log(`\n📥 Processing ${subscriptions.length} subscriptions...`);
for (const order of subscriptions) {
try {
const result = await this.processSubscription({
fundMint,
usdcMint,
investor: order.investor,
usdcAmount: order.amount
});
order.status = "executed";
signatures.push(result.signature);
totalUSDCSubscribed += result.usdcAmount;
totalSharesMinted += result.sharesIssued;
subscriptionsProcessed++;
} catch (error) {
console.error(` ❌ Order ${order.orderId} failed:`, error);
order.status = "failed";
}
}
// Process redemptions
console.log(`\n📤 Processing ${redemptions.length} redemptions...`);
for (const order of redemptions) {
try {
const result = await this.processRedemption({
fundMint,
usdcMint,
investor: order.investor,
shareAmount: order.amount
});
order.status = "executed";
signatures.push(result.signature);
totalSharesRedeemed += result.sharesRedeemed;
totalUSDCPaid += result.usdcPaid;
redemptionsProcessed++;
} catch (error) {
console.error(` ❌ Order ${order.orderId} failed:`, error);
order.status = "failed";
}
}
// Clear executed orders
this.pendingOrders = this.pendingOrders.filter(
(o) => o.status === "pending"
);
// Print summary
console.log(
"\n════════════════════════════════════════════════════════════════"
);
console.log(
" STRIKE SUMMARY "
);
console.log(
"════════════════════════════════════════════════════════════════"
);
console.log(` Subscriptions: ${subscriptionsProcessed} processed`);
console.log(` Total USDC In: $${totalUSDCSubscribed.toLocaleString()}`);
console.log(` Shares Minted: ${totalSharesMinted.toFixed(2)}`);
console.log(` Redemptions: ${redemptionsProcessed} processed`);
console.log(` Shares Burned: ${totalSharesRedeemed.toFixed(2)}`);
console.log(` Total USDC Out: $${totalUSDCPaid.toLocaleString()}`);
console.log(` New AUM: $${this.totalAUM.toLocaleString()}`);
console.log(
` Shares Outstanding: ${this.totalSharesOutstanding.toFixed(2)}`
);
console.log(
"════════════════════════════════════════════════════════════════\n"
);
return {
strikeId,
strikeTime,
nav: this.currentNAV,
subscriptionsProcessed,
totalUSDCSubscribed,
totalSharesMinted,
redemptionsProcessed,
totalSharesRedeemed,
totalUSDCPaid,
signatures
};
}
/**
* Get current fund state
*/
getFundState(fundMint: Address): FundState {
return {
fundMint,
currentNAV: this.currentNAV,
lastStrikeTime: this.lastStrikeTime,
totalAUM: this.totalAUM,
totalSharesOutstanding: this.totalSharesOutstanding
};
}
/**
* Get current NAV
*/
getCurrentNAV(): number {
return this.currentNAV;
}
/**
* Get pending orders
*/
getPendingOrders(): StrikeOrder[] {
return [...this.pendingOrders];
}
/**
* Calculate next strike time based on schedule
*/
getNextStrikeTime(): Date {
const now = new Date();
const currentTime = `${now.getHours().toString().padStart(2, "0")}:${now
.getMinutes()
.toString()
.padStart(2, "0")}`;
for (const strikeTime of this.strikeSchedule) {
if (strikeTime > currentTime) {
const [hours, minutes] = strikeTime.split(":");
const strikeDate = new Date(now);
strikeDate.setHours(parseInt(hours), parseInt(minutes), 0, 0);
return strikeDate;
}
}
// Next strike is tomorrow's first strike
const tomorrow = new Date(now);
tomorrow.setDate(tomorrow.getDate() + 1);
const [hours, minutes] = this.strikeSchedule[0].split(":");
tomorrow.setHours(parseInt(hours), parseInt(minutes), 0, 0);
return tomorrow;
}
/**
* Airdrops SOL for testing
*/
async airdropSol(publicKey: Address, amount: number): Promise<void> {
console.log(
`\n💰 Airdropping ${amount} SOL to ${publicKey.slice(0, 20)}...`
);
const airdrop = airdropFactory({
rpc: this.client.rpc,
rpcSubscriptions: this.client.rpcSubscriptions
});
await airdrop({
recipientAddress: publicKey,
lamports: lamports(BigInt(amount * 1_000_000_000)),
commitment: "confirmed"
});
console.log(`✅ Airdrop complete`);
}
}

Esempio d'Uso Completo

Ecco un esempio completo che illustra un'intera giornata di operazioni di NAV strike:

/**
* NAV Strikes Demo - Solana Kit Version
*
* Demonstrates multiple daily NAV strikes for a money market fund on Solana.
* Built with @solana/kit (web3.js 2.0)
*
* Run with: npm run demo:kit
* Requires: solana-test-validator running locally
*
* ⚠️ EDUCATIONAL REFERENCE ONLY - NOT FOR PRODUCTION USE
*/
import {
airdropFactory,
generateKeyPairSigner,
lamports,
KeyPairSigner,
Address
} from "@solana/kit";
import {
NAVStrikeEngine,
createSolanaClient,
getExplorerLink
} from "../nav-strike-engine";
import {
createTestUSDC,
mintTestUSDC,
getUSDCBalance,
getFundShareBalance
} from "../test-usdc";
import type { SolanaClient } from "../types";
/**
* Helper to print section headers
*/
function printHeader(title: string): void {
console.log("\n");
console.log(
"╔══════════════════════════════════════════════════════════════╗"
);
console.log(`║ ${title.padEnd(60)}║`);
console.log(
"╚══════════════════════════════════════════════════════════════╝"
);
}
/**
* Print final balances for all participants
*/
async function printBalances(
client: SolanaClient,
fundMint: Address,
usdcMint: Address,
participants: { name: string; address: Address }[]
): Promise<void> {
console.log(
"\n┌─────────────────────────────────────────────────────────────────┐"
);
console.log(
"│ FINAL BALANCES │"
);
console.log(
"├─────────────────────────────────────────────────────────────────┤"
);
for (const { name, address } of participants) {
const usdcBalance = await getUSDCBalance(client, usdcMint, address);
const shareBalance = await getFundShareBalance(client, fundMint, address);
console.log(
`│ ${name.padEnd(15)} USDC: $${usdcBalance
.toFixed(2)
.padStart(10)} │ Shares: ${shareBalance.toFixed(2).padStart(10)} │`
);
}
console.log(
"└─────────────────────────────────────────────────────────────────┘"
);
// Cost comparison
console.log(
"\n┌─────────────────────────────────────────────────────────────────┐"
);
console.log(
"│ COST COMPARISON │"
);
console.log(
"├─────────────────────────────────────────────────────────────────┤"
);
console.log(
"│ Traditional Solana NAV Strikes │"
);
console.log(
"│ ───────────────────────────────────────────────────────────── │"
);
console.log(
"│ Strikes/Day: 1 (4PM) 4+ (configurable)│"
);
console.log(
"│ Settlement: T+1/T+2 Instant │"
);
console.log(
"│ Pricing: Unknown til 4PM Exact NAV at strike │"
);
console.log(
"│ Compliance: Manual KYC/AML Onchain whitelist │"
);
console.log(
"│ Settlement Risk: High None │"
);
console.log(
"│ Audit Trail: Manual Blockchain │"
);
console.log(
"└─────────────────────────────────────────────────────────────────┘"
);
}
/**
* Main demo function
*/
async function main(): Promise<void> {
console.log(`
╔══════════════════════════════════════════════════════════════════╗
║ ║
║ ███╗ ██╗ █████╗ ██╗ ██╗ ███████╗████████╗██████╗ ║
║ ████╗ ██║██╔══██╗██║ ██║ ██╔════╝╚══██╔══╝██╔══██╗ ║
║ ██╔██╗ ██║███████║██║ ██║ ███████╗ ██║ ██████╔╝ ║
║ ██║╚██╗██║██╔══██║╚██╗ ██╔╝ ╚════██║ ██║ ██╔══██╗ ║
║ ██║ ╚████║██║ ██║ ╚████╔╝ ███████║ ██║ ██║ ██║ ║
║ ╚═╝ ╚═══╝╚═╝ ╚═╝ ╚═══╝ ╚══════╝ ╚═╝ ╚═╝ ╚═╝ ║
║ ║
║ NAV STRIKES - Solana Kit Reference Implementation ║
║ Built with @solana/kit (web3.js 2.0) ║
║ ║
╚══════════════════════════════════════════════════════════════════╝
`);
// ─────────────────────────────────────────────────────────────────
// SETUP: Connect to local validator
// ─────────────────────────────────────────────────────────────────
printHeader("SETUP: Connecting to Local Validator");
const client = await createSolanaClient();
console.log("✅ Connected to local validator (http://127.0.0.1:8899)");
// Create keypairs
const fundAdmin = await generateKeyPairSigner();
const investorA = await generateKeyPairSigner();
const investorB = await generateKeyPairSigner();
console.log(`\n👤 Fund Administrator: ${fundAdmin.address}`);
console.log(`👤 Investor A: ${investorA.address}`);
console.log(`👤 Investor B: ${investorB.address}`);
// Create airdrop function
const airdrop = airdropFactory({
rpc: client.rpc,
rpcSubscriptions: client.rpcSubscriptions
});
// Fund accounts with SOL
console.log("\n💰 Airdropping SOL to accounts...");
await airdrop({
recipientAddress: fundAdmin.address,
lamports: lamports(10_000_000_000n),
commitment: "confirmed"
});
console.log(" ✅ Fund Admin: 10 SOL");
await airdrop({
recipientAddress: investorA.address,
lamports: lamports(2_000_000_000n),
commitment: "confirmed"
});
console.log(" ✅ Investor A: 2 SOL");
await airdrop({
recipientAddress: investorB.address,
lamports: lamports(2_000_000_000n),
commitment: "confirmed"
});
console.log(" ✅ Investor B: 2 SOL");
// ─────────────────────────────────────────────────────────────────
// STEP 1: Create Test USDC
// ─────────────────────────────────────────────────────────────────
printHeader("STEP 1: Creating Test USDC");
const usdcMint = await createTestUSDC(client, fundAdmin, fundAdmin);
// Mint USDC to participants
await mintTestUSDC(
client,
usdcMint,
fundAdmin,
investorA.address,
500,
"Investor A"
);
await mintTestUSDC(
client,
usdcMint,
fundAdmin,
investorB.address,
300,
"Investor B"
);
await mintTestUSDC(
client,
usdcMint,
fundAdmin,
fundAdmin.address,
1000,
"Fund Admin"
);
// ─────────────────────────────────────────────────────────────────
// STEP 2: Create NAV Strike Engine & Fund Token
// ─────────────────────────────────────────────────────────────────
printHeader("STEP 2: Creating Fund & NAV Strike Engine");
const engine = new NAVStrikeEngine(client, fundAdmin, "localnet");
const fundMint = await engine.createFundToken(fundAdmin, {
name: "Example Money Market Fund",
symbol: "EX-MMF",
uri: "Link to of chain meta data",
initialNAV: 1.0,
strikeSchedule: ["09:30", "12:00", "14:30", "16:00"],
decimals: 6
});
// ─────────────────────────────────────────────────────────────────
// STEP 3: Whitelist Investors
// ─────────────────────────────────────────────────────────────────
printHeader("STEP 3: Whitelisting Investors (KYC/AML)");
await engine.whitelistInvestor(fundMint, investorA.address, fundAdmin);
await engine.whitelistInvestor(fundMint, investorB.address, fundAdmin);
// ─────────────────────────────────────────────────────────────────
// STRIKE 1: 9:30 AM - Initial Subscriptions
// ─────────────────────────────────────────────────────────────────
printHeader("STRIKE 1: 9:30 AM - Initial Subscriptions");
// Investors delegate USDC and queue orders
await engine.delegateUSDCForSubscription(investorA, usdcMint, 250);
engine.queueOrder(investorA.address, "subscribe", 250);
await engine.delegateUSDCForSubscription(investorB, usdcMint, 150);
engine.queueOrder(investorB.address, "subscribe", 150);
// Execute strike at $1.00 NAV
await engine.executeStrike(fundMint, usdcMint, 1.0);
// ─────────────────────────────────────────────────────────────────
// STRIKE 2: 12:00 PM - Additional Subscription
// ─────────────────────────────────────────────────────────────────
printHeader("STRIKE 2: 12:00 PM - Additional Subscription");
// Investor A adds more
await engine.delegateUSDCForSubscription(investorA, usdcMint, 100);
engine.queueOrder(investorA.address, "subscribe", 100);
// Execute strike at $1.01 NAV (slight gain from interest)
await engine.executeStrike(fundMint, usdcMint, 1.01);
// ─────────────────────────────────────────────────────────────────
// STRIKE 3: 2:30 PM - Partial Redemption
// ─────────────────────────────────────────────────────────────────
printHeader("STRIKE 3: 2:30 PM - Partial Redemption");
// Investor B redeems 50 shares
await engine.delegateSharesForRedemption(investorB, fundMint, 50);
engine.queueOrder(investorB.address, "redeem", 50);
// Execute strike at $1.02 NAV
await engine.executeStrike(fundMint, usdcMint, 1.02);
// ─────────────────────────────────────────────────────────────────
// STRIKE 4: 4:00 PM - End of Day
// ─────────────────────────────────────────────────────────────────
printHeader("STRIKE 4: 4:00 PM - End of Day");
// No new orders, just NAV update
await engine.executeStrike(fundMint, usdcMint, 1.03);
// ─────────────────────────────────────────────────────────────────
// FINAL: Print Balances
// ─────────────────────────────────────────────────────────────────
printHeader("FINAL RESULTS");
await printBalances(client, fundMint, usdcMint, [
{ name: "Fund Admin", address: fundAdmin.address },
{ name: "Investor A", address: investorA.address },
{ name: "Investor B", address: investorB.address }
]);
// Print fund state
const fundState = engine.getFundState(fundMint);
console.log("\n📊 Fund State:");
console.log(` Current NAV: $${fundState.currentNAV.toFixed(6)}`);
console.log(` Total AUM: $${fundState.totalAUM.toLocaleString()}`);
console.log(
` Shares Outstanding: ${fundState.totalSharesOutstanding.toFixed(2)}`
);
console.log(` Last Strike: ${fundState.lastStrikeTime.toISOString()}`);
console.log(
"\n✅ Demo complete! NAV Strikes with Solana Kit working correctly."
);
console.log(
" View transactions on Solana Explorer (local validator - links shown above)\n"
);
}
// Run the demo
main().catch((error) => {
console.error("❌ Demo failed:", error);
process.exit(1);
});

Considerazioni per la Produzione

Prima del deployment in produzione, assicurarsi di affrontare i seguenti aspetti:

  1. Sicurezza: Gestione professionale delle chiavi, controlli multi-firma e audit di sicurezza completi del codice sorgente
  2. Conformità Normativa: Registrazione dei titoli, sistemi KYC/AML, restrizioni sui trasferimenti e reportistica obbligatoria
  3. Gestione delle Chiavi: Soluzioni di custodia istituzionale con adeguate procedure di backup e ripristino
  4. Elaborazione delle Transazioni: Commissioni prioritarie, logica di retry, gestione delle conferme e ridondanza RPC
  5. Operazioni del Fondo: Calcolo del NAV da fonti autorevoli, integrazione con il depositario e riconciliazione
  6. Monitoraggio: Tracciamento in tempo reale, sistema di alerting e reportistica normativa automatizzata

Prossimi Passi

Dopo aver compreso i NAV strike su Solana:

  1. Esplora Token Extensions: Scopri altre Token 2022 extensions come ad esempio il delegato permanente per funzionalità di conformità aggiuntive

  2. Implementa Token ACL: Per una conformità avanzata, considera l'utilizzo di Token ACL per gestire la whitelist degli investitori con sblocco senza permessi. Questo consente la verifica KYC self-service dove gli investitori possono attivare automaticamente i propri account dopo aver superato i controlli di conformità, riducendo il carico operativo pur mantenendo il controllo normativo.

  3. Studia il Regolamento DvP: Consulta la nostra guida Delivery vs Payment per i modelli di regolamento dei titoli

  4. Architettura di Produzione: Progetta sistemi robusti di schedulazione, monitoraggio e disaster recovery

Conclusione

Il modello di transazione atomica di Solana e le Token Extensions forniscono una base solida per implementare più NAV strike giornalieri per fondi del mercato monetario. La combinazione di:

  • Esecuzione atomica nativa (nessun rischio legato a smart contract)
  • Finalità in meno di un secondo
  • Costi di transazione quasi nulli
  • Trasparenza NAV onchain
  • Funzionalità di conformità integrate (default congelati, metadati)

Rende Solana una piattaforma ideale per modernizzare l'infrastruttura di regolamento dei fondi e offrire agli investitori opportunità di negoziazione più frequenti.

Tuttavia, il passaggio da questa implementazione di riferimento educativa alla produzione richiede un lavoro aggiuntivo significativo in termini di sicurezza, conformità, custodia e operatività. Collaborare sempre con esperti legali, normativi e tecnici qualificati quando si tratta di tokenizzazione di fondi.

Is this page helpful?

© 2026 Solana Foundation. Tutti i diritti riservati.