Bekleyen bakiyeyi uygula
Bekleyen bakiyeyi kullanılabilir bakiyeye nasıl uygulanır
Tokenler gizli olarak transfer edilmeden önce, açık token bakiyesinin gizli bakiyeye dönüştürülmesi gerekir. Bu dönüşüm iki aşamada gerçekleşir:
- Gizli Bekleyen Bakiye: Başlangıçta, tokenler açık bakiyeden "bekleyen" gizli bakiyeye "yatırılır".
- Gizli Kullanılabilir Bakiye: Bekleyen bakiye daha sonra kullanılabilir bakiyeye "uygulanır", böylece tokenler gizli transferler için kullanılabilir hale gelir.
Bu bölüm, ikinci aşamayı açıklar: bekleyen bakiyeyi kullanılabilir bakiyeye uygulamak.
Tokenler açık bakiyeden "yatırıldığında" veya bir token account'tan diğerine gizli olarak transfer edildiğinde, tokenler başlangıçta gizli bekleyen bakiyeye eklenir. Tokenler gizli transferler için kullanılmadan önce, bekleyen bakiyenin kullanılabilir bakiyeye "uygulanması" gerekir.
Aşağıdaki diyagram, bekleyen bakiyeyi kullanılabilir bakiyeye uygulamada yer alan adımları göstermektedir:
Gerekli Talimat
Bekleyen bakiyeyi kullanılabilir bakiyeye dönüştürmek için, ConfidentialTransferInstruction::ApplyPendingBalance talimatını çağırın.
spl_token_client
crate'i, aşağıdaki örnekte gösterildiği gibi
ApplyPendingBalance
talimatı içeren bir işlem oluşturup gönderen bir
confidential_transfer_apply_pending_balance
metodu sağlar.
Örnek Kod
Aşağıdaki örnek, gizli bekleyen bakiyeyi gizli kullanılabilir bakiyeye nasıl uygulayacağınızı göstermektedir.
Örneği çalıştırmak için, aşağıdaki komutu kullanarak mainnet'ten klonlanmış Token Extensions Program ile yerel bir validator başlatın. Yerel validator'ı başlatmak için Solana CLI'nin kurulu olması gerekir.
$solana-test-validator --clone-upgradeable-program TokenzQdBNbLqP5VEhdkAS6EPFLC1PHnBqCXEpPxuEb --url https://api.mainnet-beta.solana.com -r
Bu yazının yazıldığı sırada, Gizli Transferler varsayılan yerel validator üzerinde etkinleştirilmemiştir. Örnek kodu çalıştırmak için ana ağdaki Token Extensions Program'ı klonlamanız gerekmektedir.
use anyhow::{Context, Result};use solana_client::nonblocking::rpc_client::RpcClient;use solana_sdk::{commitment_config::CommitmentConfig,signature::{Keypair, Signer},transaction::Transaction,};use spl_associated_token_account::{get_associated_token_address_with_program_id, instruction::create_associated_token_account,};use spl_token_client::{client::{ProgramRpcClient, ProgramRpcClientSendTransaction},spl_token_2022::{extension::{confidential_transfer::instruction::{configure_account, PubkeyValidityProofData},ExtensionType,},id as token_2022_program_id,instruction::reallocate,solana_zk_sdk::encryption::{auth_encryption::*, elgamal::*},},token::{ExtensionInitializationParams, Token},};use spl_token_confidential_transfer_proof_extraction::instruction::{ProofData, ProofLocation};use std::sync::Arc;#[tokio::main]async fn main() -> Result<()> {// Create connection to local test validatorlet rpc_client = Arc::new(RpcClient::new_with_commitment(String::from("http://localhost:8899"),CommitmentConfig::confirmed(),));// Load the default Solana CLI keypair to use as the fee payer// This will be the wallet paying for the transaction fees// Use Arc to prevent multiple clones of the keypairlet payer = Arc::new(load_keypair()?);println!("Using payer: {}", payer.pubkey());// Generate a new keypair to use as the address of the token mintlet mint = Keypair::new();println!("Mint keypair generated: {}", mint.pubkey());// Set up program client for Token clientlet program_client = ProgramRpcClient::new(rpc_client.clone(), ProgramRpcClientSendTransaction);// Number of decimals for the mintlet decimals = 9;// Create a token client for the Token-2022 program// This provides high-level methods for token operationslet token = Token::new(Arc::new(program_client),&token_2022_program_id(), // Use the Token-2022 program (newer version with extensions)&mint.pubkey(), // Address of the new token mintSome(decimals), // Number of decimal placespayer.clone(), // Fee payer for transactions);// Create extension initialization parameters for the mint// The ConfidentialTransferMint extension enables confidential (private) transfers of tokenslet extension_initialization_params =vec![ExtensionInitializationParams::ConfidentialTransferMint {authority: Some(payer.pubkey()), // Authority that can modify confidential transfer settingsauto_approve_new_accounts: true, // Automatically approve new confidential accountsauditor_elgamal_pubkey: None, // Optional auditor ElGamal public key}];// Create and initialize the mint with the ConfidentialTransferMint extension// This sends a transaction to create the new token mintlet transaction_signature = token.create_mint(&payer.pubkey(), // Mint authority - can mint new tokensSome(&payer.pubkey()), // Freeze authority - can freeze token accountsextension_initialization_params, // Add the ConfidentialTransferMint extension&[&mint], // Mint keypair needed as signer).await?;// Print results for user verificationprintln!("Mint Address: {}", mint.pubkey());println!("Mint Creation Transaction Signature: {}",transaction_signature);// ===== Create and configure token account for confidential transfers =====println!("\nCreate and configure token account for confidential transfers");// Get the associated token account address for the ownerlet token_account_pubkey = get_associated_token_address_with_program_id(&payer.pubkey(), // Token account owner&mint.pubkey(), // Mint&token_2022_program_id(), // Token program ID);println!("Token Account Address: {}", token_account_pubkey);// Step 1: Create the associated token accountlet create_associated_token_account_instruction = create_associated_token_account(&payer.pubkey(), // Funding account&payer.pubkey(), // Token account owner&mint.pubkey(), // Mint&token_2022_program_id(), // Token program ID);// Step 2: Reallocate the token account to include space for the ConfidentialTransferAccount extensionlet reallocate_instruction = reallocate(&token_2022_program_id(), // Token program ID&token_account_pubkey, // Token account&payer.pubkey(), // Payer&payer.pubkey(), // Token account owner&[&payer.pubkey()], // Signers&[ExtensionType::ConfidentialTransferAccount], // Extension to reallocate space for)?;// Step 3: Generate the ElGamal keypair and AES key for token accountlet elgamal_keypair = ElGamalKeypair::new_from_signer(&payer, &token_account_pubkey.to_bytes()).expect("Failed to create ElGamal keypair");let aes_key = AeKey::new_from_signer(&payer, &token_account_pubkey.to_bytes()).expect("Failed to create AES key");// The maximum number of Deposit and Transfer instructions that can// credit pending_balance before the ApplyPendingBalance instruction is executedlet maximum_pending_balance_credit_counter = 65536;// Initial token balance is 0let decryptable_balance = aes_key.encrypt(0);// Generate the proof data client-sidelet proof_data = PubkeyValidityProofData::new(&elgamal_keypair).map_err(|_| anyhow::anyhow!("Failed to generate proof data"))?;// Indicate that proof is included in the same transactionlet proof_location =ProofLocation::InstructionOffset(1.try_into()?, ProofData::InstructionData(&proof_data));// Step 4: Create instructions to configure the account for confidential transferslet configure_account_instructions = configure_account(&token_2022_program_id(), // Program ID&token_account_pubkey, // Token account&mint.pubkey(), // Mint&decryptable_balance.into(), // Initial balancemaximum_pending_balance_credit_counter, // Maximum pending balance credit counter&payer.pubkey(), // Token Account Owner&[], // Additional signersproof_location, // Proof location)?;// Combine all instructionslet mut instructions = vec![create_associated_token_account_instruction,reallocate_instruction,];instructions.extend(configure_account_instructions);// Create and send the transactionlet recent_blockhash = rpc_client.get_latest_blockhash().await?;let transaction = Transaction::new_signed_with_payer(&instructions,Some(&payer.pubkey()),&[&payer],recent_blockhash,);let transaction_signature = rpc_client.send_and_confirm_transaction(&transaction).await?;println!("Create Token Account Transaction Signature: {}",transaction_signature);// Mint some tokens to the newly created token account// This gives the account some tokens to work withlet mint_signature = token.mint_to(&token_account_pubkey, // Destination account&payer.pubkey(), // Mint authority100 * 10u64.pow(decimals as u32), // Amount (100 tokens with decimal precision)&[&payer], // Signers).await?;println!("Mint Tokens Transaction Signature: {}", mint_signature);// Deposit the tokens to confidential state// This converts regular tokens to confidential tokensprintln!("Deposit tokens to confidential state pending balance");let deposit_signature = token.confidential_transfer_deposit(&token_account_pubkey, // The token account&payer.pubkey(), // Authority (owner) of the account100 * 10u64.pow(decimals as u32), // Amount to deposit (100 tokens)decimals, // Decimals of the token&[&payer], // Signers (owner must sign)).await?;println!("Confidential Transfer Deposit Signature: {}",deposit_signature);// Apply the pending balance to make funds availableprintln!("Apply pending balance to available balance");let apply_signature = token.confidential_transfer_apply_pending_balance(&token_account_pubkey, // The token account&payer.pubkey(), // Authority (owner) of the accountNone, // Optional new decryptable available balanceelgamal_keypair.secret(), // ElGamal keypair for public-key cryptography (decryption and ZK proofs)&aes_key, // AES key for encryption of balance and transfer amounts&[&payer], // Signers (owner must sign)).await?;println!("Apply Pending Balance Signature: {}", apply_signature);println!("Confidential transfer setup complete. Tokens are now in available balance.");println!("Associated Token Account with confidential transfers: {}",token_account_pubkey);Ok(())}// Load the keypair from the default Solana CLI keypair path (~/.config/solana/id.json)// This enables using the same wallet as the Solana CLI toolsfn load_keypair() -> Result<Keypair> {// Get the default keypair pathlet keypair_path = dirs::home_dir().context("Could not find home directory")?.join(".config/solana/id.json");// Read the keypair file directly into bytes using serde_json// The keypair file is a JSON array of byteslet file = std::fs::File::open(&keypair_path)?;let keypair_bytes: Vec<u8> = serde_json::from_reader(file)?;// Create keypair from the loaded bytes// This converts the byte array into a keypairlet keypair = Keypair::from_bytes(&keypair_bytes)?;Ok(keypair)}
Is this page helpful?